kernel.git/arch/x86/platform, branch linux-6.10.y

x86/platform/iosf_mbi: Convert PCIBIOS_* return codes to errnos

2024-08-03T06:59:12Z

[ Upstream commit 7821fa101eab529521aa4b724bf708149d70820c ] iosf_mbi_pci_{read,write}_mdr() use pci_{read,write}_config_dword() that return PCIBIOS_* codes but functions also return -ENODEV which are not compatible error codes. As neither of the functions are related to PCI read/write functions, they should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it. Fixes: 46184415368a ("arch: x86: New MailBox support driver for Intel SOC's") Signed-off-by: Ilpo Järvinen Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20240527125538.13620-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin

efi/x86: Free EFI memory map only when installing a new one.

2024-06-15T08:25:02Z

The logic in __efi_memmap_init() is shared between two different execution flows: - mapping the EFI memory map early or late into the kernel VA space, so that its entries can be accessed; - the x86 specific cloning of the EFI memory map in order to insert new entries that are created as a result of making a memory reservation via a call to efi_mem_reserve(). In the former case, the underlying memory containing the kernel's view of the EFI memory map (which may be heavily modified by the kernel itself on x86) is not modified at all, and the only thing that changes is the virtual mapping of this memory, which is different between early and late boot. In the latter case, an entirely new allocation is created that carries a new, updated version of the kernel's view of the EFI memory map. When installing this new version, the old version will no longer be referenced, and if the memory was allocated by the kernel, it will leak unless it gets freed. The logic that implements this freeing currently lives on the code path that is shared between these two use cases, but it should only apply to the latter. So move it to the correct spot. While at it, drop the dummy definition for non-x86 architectures, as that is no longer needed. Cc: Fixes: f0ef6523475f ("efi: Fix efi_memmap_alloc() leaks") Tested-by: Ashish Kalra Link: https://lore.kernel.org/all/36ad5079-4326-45ed-85f6-928ff76483d3@amd.com Signed-off-by: Ard Biesheuvel

x86/platform/olpc-xo1-sci: Convert to platform remove callback returning void

2024-04-10T12:59:31Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/63c9d1e6b07296916e4218c63f59a2dd6c6b6b16.1712732665.git.u.kleine-koenig@pengutronix.de

x86/platform/olpc-x01-pm: Convert to platform remove callback returning void

2024-04-10T12:59:31Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/c7d669d8b0c994c77fb4c3bc7bec78aeb8659c74.1712732665.git.u.kleine-koenig@pengutronix.de

x86/platform/iris: Convert to platform remove callback returning void

2024-04-10T12:59:30Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/adb9b0aca77d7aa8e54d0a664a4ee290834a60a1.1712732665.git.u.kleine-koenig@pengutronix.de

x86/of: Set the parse_smp_cfg for all the DeviceTree platforms by default

2024-04-03T06:46:08Z

x86_dtb_parse_smp_config() must be set by DeviceTree platform for parsing SMP configuration. Set the parse_smp_cfg pointer to x86_dtb_parse_smp_config() by default so that all the dtb platforms need not to assign it explicitly. Today there are only two platforms using DeviceTree in x86, ce4100 and hv_vtl. Remove the explicit assignment of x86_dtb_parse_smp_config() function from these. Signed-off-by: Saurabh Sengar Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/1712068830-4513-3-git-send-email-ssengar@linux.microsoft.com

Merge tag 'for-linus-6.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2024-03-19T15:48:09Z

Pull xen updates from Juergen Gross: - Xen event channel handling fix for a regression with a rare kernel config and some added hardening - better support of running Xen dom0 in PVH mode - a cleanup for the xen grant-dma-iommu driver * tag 'for-linus-6.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: increment refcnt only if event channel is refcounted xen/evtchn: avoid WARN() when unbinding an event channel x86/xen: attempt to inflate the memory balloon on PVH xen/grant-dma-iommu: Convert to platform remove callback returning void

Merge tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

2024-03-14T17:44:09Z

Pull x86 platform driver updates from Ilpo Järvinen: - New acer-wmi HW support - Support for new revision of amd/pmf heartbeat notify - Correctly handle asus-wmi HW without LEDs - fujitsu-laptop battery charge control support - Support for new hp-wmi thermal profiles - Support ideapad-laptop refresh rate key - Put intel/pmc AI accelerator (GNA) into D3 if it has no driver to allow entry into low-power modes, and temporarily removed Lunar Lake SSRAM support due to breaking FW changes causing probe fail (further breaking FW changes are still pending) - Report pmc/punit_atom devices that prevent reacing low power levels - Surface Fan speed function support - Support for more sperial keys and complete the list of models with non-standard fan registers in thinkpad_acpi - New DMI touchscreen HW support - Continued modernization efforts of wmi - Removal of obsoleted ledtrig-audio call and the related dependency - Debug & metrics interface improvements - Miscellaneous cleanups / fixes / improvements * tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits) platform/x86/intel/pmc: Improve PKGC residency counters debug platform/x86: asus-wmi: Consider device is absent when the read is ~0 Documentation/x86/amd/hsmp: Updating urls platform/mellanox: mlxreg-hotplug: Remove redundant NULL-check platform/x86/amd/pmf: Update sps power thermals according to the platform-profiles platform/x86/amd/pmf: Add support to get sps default APTS index values platform/x86/amd/pmf: Add support to get APTS index numbers for static slider platform/x86/amd/pmf: Add support to notify sbios heart beat event platform/x86/amd/pmf: Add support to get sbios requests in PMF driver platform/x86/amd/pmf: Disable debugfs support for querying power thermals platform/x86/amd/pmf: Differentiate PMF ACPI versions x86/platform/atom: Check state of Punit managed devices on s2idle platform/x86: pmc_atom: Check state of PMC clocks on s2idle platform/x86: pmc_atom: Check state of PMC managed devices on s2idle platform/x86: pmc_atom: Annotate d3_sts register bit defines clk: x86: Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h platform/x86: make fw_attr_class constant platform/x86/intel/tpmi: Change vsec offset to u64 platform/x86: intel_scu_pcidrv: Remove unused intel-mid.h platform/x86: intel_scu_wdt: Remove unused intel-mid.h ...

x86/xen: attempt to inflate the memory balloon on PVH

2024-03-13T16:48:26Z

When running as PVH or HVM Linux will use holes in the memory map as scratch space to map grants, foreign domain pages and possibly miscellaneous other stuff. However the usage of such memory map holes for Xen purposes can be problematic. The request of holesby Xen happen quite early in the kernel boot process (grant table setup already uses scratch map space), and it's possible that by then not all devices have reclaimed their MMIO space. It's not unlikely for chunks of Xen scratch map space to end up using PCI bridge MMIO window memory, which (as expected) causes quite a lot of issues in the system. At least for PVH dom0 we have the possibility of using regions marked as UNUSABLE in the e820 memory map. Either if the region is UNUSABLE in the native memory map, or it has been converted into UNUSABLE in order to hide RAM regions from dom0, the second stage translation page-tables can populate those areas without issues. PV already has this kind of logic, where the balloon driver is inflated at boot. Re-use the current logic in order to also inflate it when running as PVH. onvert UNUSABLE regions up to the ratio specified in EXTRA_MEM_RATIO to RAM, while reserving them using xen_add_extra_mem() (which is also moved so it's no longer tied to CONFIG_PV). [jgross: fixed build for CONFIG_PVH without CONFIG_XEN_PVH] Signed-off-by: Roger Pau Monné Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/20240220174341.56131-1-roger.pau@citrix.com Signed-off-by: Juergen Gross

x86/platform/atom: Check state of Punit managed devices on s2idle

2024-03-12T10:48:22Z

For the Bay Trail or Cherry Trail SoC to enter the S0i3 power-level at s2idle suspend requires most of the hw-blocks / devices in the SoC to be in D3 when entering s2idle suspend. If some devices are not in D3 then the SoC will stay in a higher power state, consuming much more power from the battery then in S0i3. Use the new acpi_s2idle_dev_ops and acpi_register_lps0_dev() functionality to register a new s2idle check function which checks that all hardware blocks in the North complex (controlled by Punit) are in a state that allows the SoC to enter S0i3 and prints an error message for any device in D0. Signed-off-by: Johannes Stezenbach Signed-off-by: Takashi Iwai Acked-by: "Borislav Petkov (AMD)" Reviewed-by: Ilpo Järvinen [hdegoede: Use acpi_s2idle_dev_ops] Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240305105915.76242-6-hdegoede@redhat.com Signed-off-by: Ilpo Järvinen