kernel.git/arch/x86/platform/olpc, branch linux-4.13.y

x86/mm: Split read_cr3() into read_cr3_pa() and __read_cr3()

2017-06-13T06:48:09Z

The kernel has several code paths that read CR3. Most of them assume that CR3 contains the PGD's physical address, whereas some of them awkwardly use PHYSICAL_PAGE_MASK to mask off low bits. Add explicit mask macros for CR3 and convert all of the CR3 readers. This will keep them from breaking when PCID is enabled. Signed-off-by: Andy Lutomirski Cc: Boris Ostrovsky Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Juergen Gross Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tom Lendacky Cc: xen-devel Link: http://lkml.kernel.org/r/883f8fb121f4616c1c1427ad87350bb2f5ffeca1.1497288170.git.luto@kernel.org Signed-off-by: Ingo Molnar

x86/platform/olpc: Fix resume handler build warning

2016-11-28T06:46:03Z

Fix: arch/x86/platform/olpc/olpc-xo15-sci.c:199:12: warning: ‘xo15_sci_resume’ defined but not used [-Wunused-function] static int xo15_sci_resume(struct device *dev) ^ which I see in randconfig builds here. Signed-off-by: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20161126142706.13602-1-bp@alien8.de Signed-off-by: Ingo Molnar

x86/platform: Audit and remove any unnecessary uses of module.h

2016-07-14T13:06:59Z

Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. One module.h was converted to moduleparam.h since the file had multiple module_param() in it, and another file had an instance of MODULE_DEVICE_TABLE deleted, since that is a no-op when builtin. Finally, the 32 bit build coverage of olpc_ofw revealed a couple implicit includes, which were pretty self evident to fix based on what gcc was complaining about. Signed-off-by: Paul Gortmaker Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20160714001901.31603-6-paul.gortmaker@windriver.com Signed-off-by: Ingo Molnar

x86/olpc/xo15/sci: Use newly added power_supply_put API

2015-03-13T22:15:53Z

Replace direct usage of put_device() with new API: power_supply_put(). Signed-off-by: Krzysztof Kozlowski Acked-by: Pavel Machek Reviewed-by: Bartlomiej Zolnierkiewicz Reviewed-by: Sebastian Reichel Acked-by: Ingo Molnar Signed-off-by: Sebastian Reichel

x86/olpc/xo1/sci: Use newly added power_supply_put API

2015-03-13T22:15:53Z

power_supply: Change ownership from driver to core

2015-03-13T22:15:51Z

Change the ownership of power_supply structure from each driver implementing the class to the power supply core. The patch changes power_supply_register() function thus all drivers implementing power supply class are adjusted. Each driver provides the implementation of power supply. However it should not be the owner of power supply class instance because it is exposed by core to other subsystems with power_supply_get_by_name(). These other subsystems have no knowledge when the driver will unregister the power supply. This leads to several issues when driver is unbound - mostly because user of power supply accesses freed memory. Instead let the core own the instance of struct 'power_supply'. Other users of this power supply will still access valid memory because it will be freed when device reference count reaches 0. Currently this means "it will leak" but power_supply_put() call in next patches will solve it. This solves invalid memory references in following race condition scenario: Thread 1: charger manager Thread 2: power supply driver, used by charger manager THREAD 1 (charger manager) THREAD 2 (power supply driver) ========================== ============================== psy = power_supply_get_by_name() Driver unbind, .remove power_supply_unregister() Device fully removed psy->get_property() The 'get_property' call is executed in invalid context because the driver was unbound and struct 'power_supply' memory was freed. This could be observed easily with charger manager driver (here compiled with max17040 fuel gauge): $ cat /sys/devices/virtual/power_supply/cm-battery/capacity & $ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind [ 55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 55.732584] pgd = d98d4000 [ 55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000 [ 55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 55.746210] Modules linked in: [ 55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G W 3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496 [ 55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000 [ 55.771647] PC is at 0x0 [ 55.774182] LR is at charger_get_property+0x2f4/0x36c [ 55.779201] pc : [<00000000>] lr : [] psr: 60000013 [ 55.779201] sp : daf55e90 ip : 00000003 fp : 00000000 [ 55.790657] r10: 00000000 r9 : c06e2878 r8 : d9b26c68 [ 55.795865] r7 : dad81610 r6 : daec7410 r5 : daf55ebc r4 : 00000000 [ 55.802367] r3 : 00000000 r2 : daf55ebc r1 : 0000002a r0 : d9b26c68 [ 55.808879] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 55.815994] Control: 10c5387d Table: 598d406a DAC: 00000015 [ 55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210) [ 55.827451] Stack: (0xdaf55e90 to 0xdaf56000) [ 55.831795] 5e80: 60000013 c01459c4 0000002a c06f8ef8 [ 55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4 [ 55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80 [ 55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001 [ 55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000 [ 55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000 [ 55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124 [ 55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550 [ 55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364 [ 55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c [ 55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000 [ 55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000 [ 55.929744] [] (charger_get_property) from [] (power_supply_show_property+0x48/0x20c) [ 55.939286] [] (power_supply_show_property) from [] (dev_attr_show+0x1c/0x48) [ 55.948130] [] (dev_attr_show) from [] (sysfs_kf_seq_show+0x84/0x104) [ 55.956298] [] (sysfs_kf_seq_show) from [] (kernfs_seq_show+0x24/0x28) [ 55.964536] [] (kernfs_seq_show) from [] (seq_read+0x1b0/0x484) [ 55.972172] [] (seq_read) from [] (__vfs_read+0x18/0x4c) [ 55.979188] [] (__vfs_read) from [] (vfs_read+0x7c/0x100) [ 55.986304] [] (vfs_read) from [] (SyS_read+0x40/0x8c) [ 55.993164] [] (SyS_read) from [] (ret_fast_syscall+0x0/0x48) [ 56.000626] Code: bad PC value [ 56.011652] ---[ end trace 7b64343fbdae8ef1 ]--- Signed-off-by: Krzysztof Kozlowski Reviewed-by: Bartlomiej Zolnierkiewicz [for the nvec part] Reviewed-by: Marc Dietrich [for compal-laptop.c] Acked-by: Darren Hart [for the mfd part] Acked-by: Lee Jones [for the hid part] Acked-by: Jiri Kosina [for the acpi part] Acked-by: Rafael J. Wysocki Signed-off-by: Sebastian Reichel

x86: platform: olpc: drop owner assignment from platform_drivers

2014-10-20T14:20:16Z

A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang

asmlinkage, x86: Add explicit __visible to arch/x86/*

2014-05-05T23:07:44Z

As requested by Linus add explicit __visible to the asmlinkage users. This marks all functions visible to assembler. Tree sweep for arch/x86/* Signed-off-by: Andi Kleen Link: http://lkml.kernel.org/r/1398984278-29319-3-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin

ACPI: Clean up inclusions of ACPI header files

2013-12-07T00:03:14Z

Replace direct inclusions of , and , which are incorrect, with inclusions and remove some inclusions of those files that aren't necessary. First of all, , and should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that be included prior to so that the acpi_pci_root declarations the latter depends on are always there. And which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including as appropriate. Signed-off-by: Lv Zheng Cc: Greg Kroah-Hartman Cc: Matthew Garrett Cc: Tony Luck Cc: "H. Peter Anvin" Acked-by: Bjorn Helgaas (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk (Xen stuff) Signed-off-by: Rafael J. Wysocki

olpc_xo15_sci: convert acpi_evaluate_object() to acpi_execute_simple_method()

2013-09-23T23:37:53Z

acpi_execute_simple_method() is a new ACPI API introduced to invoke an ACPI control method that has single integer parameter and no return value. Convert acpi_evaluate_object() to acpi_execute_simple_method() in arch/x86/platform/olpc/olpc-xo15-sci.c Signed-off-by: Zhang Rui CC: Daniel Drake CC: H. Peter Anvin Signed-off-by: Rafael J. Wysocki