kernel.git/arch/x86/kernel/smpboot.c, branch linux-4.20.y

x86/topology: Use total_cpus for max logical packages calculation

2019-01-26T08:20:48Z

[ Upstream commit aa02ef099cff042c2a9109782ec2bf1bffc955d4 ] nr_cpu_ids can be limited on the command line via nr_cpus=. This can break the logical package management because it results in a smaller number of packages while in kdump kernel. Check below case: There is a two sockets system, each socket has 8 cores, which has 16 logical cpus while HT was turn on. 0 1 2 3 4 5 6 7 | 16 17 18 19 20 21 22 23 cores on socket 0 threads on socket 0 8 9 10 11 12 13 14 15 | 24 25 26 27 28 29 30 31 cores on socket 1 threads on socket 1 While starting the kdump kernel with command line option nr_cpus=16 panic was triggered on one of the cpus 24-31 eg. 26, then online cpu will be 1-15, 26(cpu 0 was disabled in kdump), ncpus will be 16 and __max_logical_packages will be 1, but actually two packages were booted on. This issue can reproduced by set kdump option nr_cpus=, and then trigger panic on last socket's thread, for example: taskset -c 26 echo c > /proc/sysrq-trigger Use total_cpus which will not be limited by nr_cpus command line to calculate the value of __max_logical_packages. Signed-off-by: Hui Wang Signed-off-by: Thomas Gleixner Cc: Cc: Cc: Cc: Link: https://lkml.kernel.org/r/20181107023643.22174-1-john.wanghui@huawei.com Signed-off-by: Sasha Levin

mm: remove include/linux/bootmem.h

2018-10-31T15:54:16Z

Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include @@ @@ - #include + #include [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport Signed-off-by: Stephen Rothwell Acked-by: Michal Hocko Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Ingo Molnar Cc: "James E.J. Bottomley" Cc: Jonas Bonn Cc: Jonathan Corbet Cc: Ley Foon Tan Cc: Mark Salter Cc: Martin Schwidefsky Cc: Matt Turner Cc: Michael Ellerman Cc: Michal Simek Cc: Palmer Dabbelt Cc: Paul Burton Cc: Richard Kuo Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Serge Semin Cc: Thomas Gleixner Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana

2018-09-27T16:28:57Z

The Hygon Dhyana CPU uses no delay in smp_quirk_init_udelay(), and does HLT on idle just like AMD does. Signed-off-by: Pu Wen Signed-off-by: Borislav Petkov Reviewed-by: Borislav Petkov Cc: bp@alien8.de Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: x86@kernel.org Cc: thomas.lendacky@amd.com Link: https://lkml.kernel.org/r/87000fa82e273f5967c908448414228faf61e077.1537533369.git.puwen@hygon.cn

Merge 4.18-rc7 into master to pick up the KVM dependcy

2018-08-05T14:39:29Z

Signed-off-by: Thomas Gleixner

x86: Don't include linux/irq.h from asm/hardirq.h

2018-08-05T07:53:13Z

The next patch in this series will have to make the definition of irq_cpustat_t available to entering_irq(). Inclusion of asm/hardirq.h into asm/apic.h would cause circular header dependencies like asm/smp.h asm/apic.h asm/hardirq.h linux/irq.h linux/topology.h linux/smp.h asm/smp.h or linux/gfp.h linux/mmzone.h asm/mmzone.h asm/mmzone_64.h asm/smp.h asm/apic.h asm/hardirq.h linux/irq.h linux/irqdesc.h linux/kobject.h linux/sysfs.h linux/kernfs.h linux/idr.h linux/gfp.h and others. This causes compilation errors because of the header guards becoming effective in the second inclusion: symbols/macros that had been defined before wouldn't be available to intermediate headers in the #include chain anymore. A possible workaround would be to move the definition of irq_cpustat_t into its own header and include that from both, asm/hardirq.h and asm/apic.h. However, this wouldn't solve the real problem, namely asm/harirq.h unnecessarily pulling in all the linux/irq.h cruft: nothing in asm/hardirq.h itself requires it. Also, note that there are some other archs, like e.g. arm64, which don't have that #include in their asm/hardirq.h. Remove the linux/irq.h #include from x86' asm/hardirq.h. Fix resulting compilation errors by adding appropriate #includes to *.c files as needed. Note that some of these *.c files could be cleaned up a bit wrt. to their set of #includes, but that should better be done from separate patches, if at all. Signed-off-by: Nicolai Stange Signed-off-by: Thomas Gleixner

x86/mm/32: Initialize the CR4 shadow before __flush_tlb_all()

2018-07-03T07:26:10Z

On 32-bit kernels, __flush_tlb_all() may have read the CR4 shadow before the initialization of CR4 shadow in cpu_init(). Fix it by adding an explicit cr4_init_shadow() call into start_secondary() which is the first function called on non-boot SMP CPUs - ahead of the __flush_tlb_all() call. ( This is somewhat of a layering violation, but start_secondary() does CR4 bootstrap in the PCID case anyway. ) Signed-off-by: Zhenzhong Duan Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: "H. Peter Anvin" Link: http://lkml.kernel.org/r/b07b6ae9-4b57-4b40-b9bc-50c2c67f1d91@default Signed-off-by: Ingo Molnar

x86/topology: Provide topology_smt_supported()

2018-06-21T12:20:57Z

Provide information whether SMT is supoorted by the CPUs. Preparatory patch for SMT control mechanism. Suggested-by: Dave Hansen Signed-off-by: Thomas Gleixner Acked-by: Ingo Molnar

x86/smp: Provide topology_is_primary_thread()

2018-06-21T12:20:57Z

If the CPU is supporting SMT then the primary thread can be found by checking the lower APIC ID bits for zero. smp_num_siblings is used to build the mask for the APIC ID bits which need to be taken into account. This uses the MPTABLE or ACPI/MADT supplied APIC ID, which can be different than the initial APIC ID in CPUID. But according to AMD the lower bits have to be consistent. Intel gave a tentative confirmation as well. Preparatory patch to support disabling SMT at boot/runtime. Signed-off-by: Thomas Gleixner Reviewed-by: Konrad Rzeszutek Wilk Acked-by: Ingo Molnar

Merge branch 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-06-05T01:19:18Z

Pull x86 boot updates from Ingo Molnar: - Centaur CPU updates (David Wang) - AMD and other CPU topology enumeration improvements and fixes (Borislav Petkov, Thomas Gleixner, Suravee Suthikulpanit) - Continued 5-level paging work (Kirill A. Shutemov) * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Mark __pgtable_l5_enabled __initdata x86/mm: Mark p4d_offset() __always_inline x86/mm: Introduce the 'no5lvl' kernel parameter x86/mm: Stop pretending pgtable_l5_enabled is a variable x86/mm: Unify pgtable_l5_enabled usage in early boot code x86/boot/compressed/64: Fix trampoline page table address calculation x86/CPU: Move x86_cpuinfo::x86_max_cores assignment to detect_num_cpu_cores() x86/Centaur: Report correct CPU/cache topology x86/CPU: Move cpu_detect_cache_sizes() into init_intel_cacheinfo() x86/CPU: Make intel_num_cpu_cores() generic x86/CPU: Move cpu local function declarations to local header x86/CPU/AMD: Derive CPU topology from CPUID function 0xB when available x86/CPU: Modify detect_extended_topology() to return result x86/CPU/AMD: Calculate last level cache ID from number of sharing threads x86/CPU: Rename intel_cacheinfo.c to cacheinfo.c perf/events/amd/uncore: Fix amd_uncore_llc ID to use pre-defined cpu_llc_id x86/CPU/AMD: Have smp_num_siblings and cpu_llc_id always be present x86/Centaur: Initialize supported CPU features properly

Merge branches 'x86/urgent' and 'core/urgent' into x86/boot, to pick up fixes and avoid conflicts

2018-05-19T06:18:56Z

Signed-off-by: Ingo Molnar