kernel.git/arch/x86/kernel/kprobes, branch linux-4.18.y

kprobes/x86: Use preempt_enable() in optimized_callback()

2018-11-13T19:12:13Z

commit 2e62024c265aa69315ed02835623740030435380 upstream. The following commit: a19b2e3d7839 ("kprobes/x86: Remove IRQ disabling from ftrace-based/optimized kprobes”) removed local_irq_save/restore() from optimized_callback(), the handler might be interrupted by the rescheduling interrupt and might be rescheduled - so we must not use the preempt_enable_no_resched() macro. Use preempt_enable() instead, to not lose preemption events. [ mingo: Improved the changelog. ] Reported-by: Nadav Amit Signed-off-by: Masami Hiramatsu Acked-by: Peter Zijlstra (Intel) Cc: Cc: Alexei Starovoitov Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Thomas Gleixner Cc: dwmw@amazon.co.uk Fixes: a19b2e3d7839 ("kprobes/x86: Remove IRQ disabling from ftrace-based/optimized kprobes”) Link: http://lkml.kernel.org/r/154002887331.7627.10194920925792947001.stgit@devbox Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

kprobes/x86: Fix %p uses in error messages

2018-08-15T15:37:24Z

commit 0ea063306eecf300fcf06d2f5917474b580f666f upstream. Remove all %p uses in error messages in kprobes/x86. Signed-off-by: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Cc: Anil S Keshavamurthy Cc: Arnd Bergmann Cc: David Howells Cc: David S . Miller Cc: Heiko Carstens Cc: Jon Medhurst Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Thomas Richter Cc: Tobin C . Harding Cc: Will Deacon Cc: acme@kernel.org Cc: akpm@linux-foundation.org Cc: brueckner@linux.vnet.ibm.com Cc: linux-arch@vger.kernel.org Cc: rostedt@goodmis.org Cc: schwidefsky@de.ibm.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/lkml/152491902310.9916.13355297638917767319.stgit@devbox Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

kprobes/x86: Prohibit probing on exception masking instructions

2018-05-13T17:52:55Z

Since MOV SS and POP SS instructions will delay the exceptions until the next instruction is executed, single-stepping on it by kprobes must be prohibited. However, kprobes usually executes those instructions directly on trampoline buffer (a.k.a. kprobe-booster), except for the kprobes which has post_handler. Thus if kprobe user probes MOV SS with post_handler, it will do single-stepping on the MOV SS. This means it is safe that if it is used via ftrace or perf/bpf since those don't use the post_handler. Anyway, since the stack switching is a rare case, it is safer just rejecting kprobes on such instructions. Signed-off-by: Masami Hiramatsu Signed-off-by: Thomas Gleixner Cc: Ricardo Neri Cc: Francis Deslauriers Cc: Oleg Nesterov Cc: Alexei Starovoitov Cc: Steven Rostedt Cc: Andy Lutomirski Cc: "H . Peter Anvin" Cc: Yonghong Song Cc: Borislav Petkov Cc: Linus Torvalds Cc: "David S . Miller" Link: https://lkml.kernel.org/r/152587069574.17316.3311695234863248641.stgit@devbox

x86/kprobes: Fix kernel crash when probing .entry_trampoline code

2018-03-09T08:58:36Z

Disable the kprobe probing of the entry trampoline: .entry_trampoline is a code area that is used to ensure page table isolation between userspace and kernelspace. At the beginning of the execution of the trampoline, we load the kernel's CR3 register. This has the effect of enabling the translation of the kernel virtual addresses to physical addresses. Before this happens most kernel addresses can not be translated because the running process' CR3 is still used. If a kprobe is placed on the trampoline code before that change of the CR3 register happens the kernel crashes because int3 handling pages are not accessible. To fix this, add the .entry_trampoline section to the kprobe blacklist to prohibit the probing of code before all the kernel pages are accessible. Signed-off-by: Francis Deslauriers Reviewed-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: mathieu.desnoyers@efficios.com Cc: mhiramat@kernel.org Link: http://lkml.kernel.org/r/1520565492-4637-2-git-send-email-francis.deslauriers@efficios.com Signed-off-by: Ingo Molnar

Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-01-21T18:48:35Z

Pull x86 pti fixes from Thomas Gleixner: "A small set of fixes for the meltdown/spectre mitigations: - Make kprobes aware of retpolines to prevent probes in the retpoline thunks. - Make the machine check exception speculation protected. MCE used to issue an indirect call directly from the ASM entry code. Convert that to a direct call into a C-function and issue the indirect call from there so the compiler can add the retpoline protection, - Make the vmexit_fill_RSB() assembly less stupid - Fix a typo in the PTI documentation" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/retpoline: Optimize inline assembler for vmexit_fill_RSB x86/pti: Document fix wrong index kprobes/x86: Disable optimizing on the function jumps to indirect thunk kprobes/x86: Blacklist indirect thunk functions for kprobes retpoline: Introduce start/end markers of indirect thunk x86/mce: Make machine check speculation protected

kprobes/x86: Disable optimizing on the function jumps to indirect thunk

2018-01-19T15:31:29Z

Since indirect jump instructions will be replaced by jump to __x86_indirect_thunk_*, those jmp instruction must be treated as an indirect jump. Since optprobe prohibits to optimize probes in the function which uses an indirect jump, it also needs to find out the function which jump to __x86_indirect_thunk_* and disable optimization. Add a check that the jump target address is between the __indirect_thunk_start/end when optimizing kprobe. Signed-off-by: Masami Hiramatsu Signed-off-by: Thomas Gleixner Acked-by: David Woodhouse Cc: Andi Kleen Cc: Peter Zijlstra Cc: Ananth N Mavinakayanahalli Cc: Arjan van de Ven Cc: Greg Kroah-Hartman Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/151629212062.10241.6991266100233002273.stgit@devbox

Merge branch 'linus' into perf/core, to fix conflicts

2017-11-07T09:30:18Z

Conflicts: tools/perf/arch/arm/annotate/instructions.c tools/perf/arch/arm64/annotate/instructions.c tools/perf/arch/powerpc/annotate/instructions.c tools/perf/arch/s390/annotate/instructions.c tools/perf/arch/x86/tests/intel-cqm.c tools/perf/ui/tui/progress.c tools/perf/util/zlib.c Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge branch 'perf/urgent' into perf/core, to pick up fixes

2017-10-20T09:02:05Z

Signed-off-by: Ingo Molnar

kprobes/x86: Remove IRQ disabling from jprobe handlers

2017-10-03T17:11:48Z

Jprobes actually don't need to disable IRQs while calling handlers, because of how we specify the kernel interface in Documentation/kprobes.txt: ----- Probe handlers are run with preemption disabled. Depending on the architecture and optimization state, handlers may also run with interrupts disabled (e.g., kretprobe handlers and optimized kprobe handlers run without interrupt disabled on x86/x86-64). ----- So let's remove IRQ disabling from jprobes too. Signed-off-by: Masami Hiramatsu Cc: Alexei Starovoitov Cc: Alexei Starovoitov Cc: Ananth N Mavinakayanahalli Cc: Linus Torvalds Cc: Paul E . McKenney Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/150701508194.32266.14458959863314097305.stgit@devbox Signed-off-by: Ingo Molnar