kernel.git/arch/x86/kernel/cpu, branch linux-rolling-stable

x86/topo: Add topology_num_nodes_per_package()

2026-03-12T11:09:55Z

[ Upstream commit ae6730ff42b3a13d94b405edeb5e40108b6d21b6 ] Use the MADT and SRAT table data to compute __num_nodes_per_package. Specifically, SRAT has already been parsed in x86_numa_init(), which is called before acpi_boot_init() which parses MADT. So both are available in topology_init_possible_cpus(). This number is useful to divinate the various Intel CoD/SNC and AMD NPS modes, since the platforms are failing to provide this otherwise. Doing it this way is independent of the number of online CPUs and other such shenanigans. Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Ingo Molnar Tested-by: Tony Luck Tested-by: K Prateek Nayak Tested-by: Zhang Rui Tested-by: Chen Yu Tested-by: Kyle Meyer Link: https://patch.msgid.link/20260303110100.004091624@infradead.org Stable-dep-of: 528d89a4707e ("x86/topo: Fix SNC topology mess") Signed-off-by: Sasha Levin

x86/acpi/boot: Correct acpi_is_processor_usable() check again

2026-03-04T12:20:59Z

[ Upstream commit adbf61cc47cb72b102682e690ad323e1eda652c2 ] ACPI v6.3 defined a new "Online Capable" MADT LAPIC flag. This bit is used in conjunction with the "Enabled" MADT LAPIC flag to determine if a CPU can be enabled/hotplugged by the OS after boot. Before the new bit was defined, the "Enabled" bit was explicitly described like this (ACPI v6.0 wording provided): "If zero, this processor is unusable, and the operating system support will not attempt to use it" This means that CPU hotplug (based on MADT) is not possible. Many BIOS implementations follow this guidance. They may include LAPIC entries in MADT for unavailable CPUs, but since these entries are marked with "Enabled=0" it is expected that the OS will completely ignore these entries. However, QEMU will do the same (include entries with "Enabled=0") for the purpose of allowing CPU hotplug within the guest. Comment from QEMU function pc_madt_cpu_entry(): /* ACPI spec says that LAPIC entry for non present * CPU may be omitted from MADT or it must be marked * as disabled. However omitting non present CPU from * MADT breaks hotplug on linux. So possible CPUs * should be put in MADT but kept disabled. */ Recent Linux topology changes broke the QEMU use case. A following fix for the QEMU use case broke bare metal topology enumeration. Rework the Linux MADT LAPIC flags check to allow the QEMU use case only for guests and to maintain the ACPI spec behavior for bare metal. Remove an unnecessary check added to fix a bare metal case introduced by the QEMU "fix". [ bp: Change logic as Michal suggested. ] [ mingo: Removed misapplied -stable tag. ] Fixes: fed8d8773b8e ("x86/acpi/boot: Correct acpi_is_processor_usable() check") Fixes: f0551af02130 ("x86/topology: Ignore non-present APIC IDs in a present package") Closes: https://lore.kernel.org/r/20251024204658.3da9bf3f.michal.pecio@gmail.com Reported-by: Michal Pecio Signed-off-by: Yazen Ghannam Signed-off-by: Borislav Petkov (AMD) Signed-off-by: Ingo Molnar Tested-by: Michal Pecio Tested-by: Ricardo Neri Link: https://lore.kernel.org/20251111145357.4031846-1-yazen.ghannam@amd.com Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin

x86/cpu/amd: Correct the microcode table for Zenbleed

2026-02-26T23:00:44Z

[ Upstream commit fb7bfa31b8e8569f154f2fe0ea6c2f03c0f087aa ] The good revisions are tied to exact steppings, meaning it's not valid to match on model number alone, let alone a range. This is probably only a latent issue. From public microcode archives, the following CPUs exist 17-30-00, 17-60-00, 17-70-00 and would be captured by the model ranges. They're likely pre-production steppings, and likely didn't get Zenbleed microcode, but it's still incorrect to compare them to a different steppings revision. Either way, convert the logic to use x86_match_min_microcode_rev(), which is the preferred mechanism. Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix") Signed-off-by: Andrew Cooper Signed-off-by: Ingo Molnar Cc: Borislav Petkov Cc: Mario Limonciello Cc: x86@kernel.org Link: https://patch.msgid.link/20251126130352.880424-1-andrew.cooper3@citrix.com Signed-off-by: Sasha Levin

x86/resctrl: Fix memory bandwidth counter width for Hygon

2026-01-13T15:44:26Z

The memory bandwidth calculation relies on reading the hardware counter and measuring the delta between samples. To ensure accurate measurement, the software reads the counter frequently enough to prevent it from rolling over twice between reads. The default Memory Bandwidth Monitoring (MBM) counter width is 24 bits. Hygon CPUs provide a 32-bit width counter, but they do not support the MBM capability CPUID leaf (0xF.[ECX=1]:EAX) to report the width offset (from 24 bits). Consequently, the kernel falls back to the 24-bit default counter width, which causes incorrect overflow handling on Hygon CPUs. Fix this by explicitly setting the counter width offset to 8 bits (resulting in a 32-bit total counter width) for Hygon CPUs. Fixes: d8df126349da ("x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper") Signed-off-by: Xiaochen Shen Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Tony Luck Reviewed-by: Reinette Chatre Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251209062650.1536952-3-shenxiaochen@open-hieco.net

x86/resctrl: Add missing resctrl initialization for Hygon

2026-01-13T15:20:01Z

Hygon CPUs supporting Platform QoS features currently undergo partial resctrl initialization through resctrl_cpu_detect() in the Hygon BSP init helper and AMD/Hygon common initialization code. However, several critical data structures remain uninitialized for Hygon CPUs in the following paths: - get_mem_config()-> __rdt_get_mem_config_amd(): rdt_resource::membw,alloc_capable hw_res::num_closid - rdt_init_res_defs()->rdt_init_res_defs_amd(): rdt_resource::cache hw_res::msr_base,msr_update Add the missing AMD/Hygon common initialization to ensure proper Platform QoS functionality on Hygon CPUs. Fixes: d8df126349da ("x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper") Signed-off-by: Xiaochen Shen Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Reinette Chatre Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251209062650.1536952-2-shenxiaochen@open-hieco.net

x86/microcode/AMD: Fix Entrysign revision check for Zen5/Strix Halo

2025-12-29T19:08:02Z

Zen5 also contains family 1Ah, models 70h-7Fh, which are mistakenly missing from cpu_has_entrysign(). Add the missing range. Fixes: 8a9fb5129e8e ("x86/microcode/AMD: Limit Entrysign signature checking to known generations") Signed-off-by: Rong Zhang Signed-off-by: Borislav Petkov (AMD) Cc: stable@kernel.org Link: https://patch.msgid.link/20251229182245.152747-1-i@rong.moe

x86/sgx: Remove unmatched quote in __sgx_encl_extend function comment

2025-12-13T10:01:16Z

There is no opening quote. Remove the unmatched closing quote. Signed-off-by: Thorsten Blum Signed-off-by: Ingo Molnar Reviewed-by: Kai Huang Link: https://patch.msgid.link/20251210125628.544916-1-thorsten.blum@linux.dev

Merge tag 'hyperv-next-signed-20251207' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

2025-12-08T21:10:17Z

Pull hyperv updates from Wei Liu: - Enhancements to Linux as the root partition for Microsoft Hypervisor: - Support a new mode called L1VH, which allows Linux to drive the hypervisor running the Azure Host directly - Support for MSHV crash dump collection - Allow Linux's memory management subsystem to better manage guest memory regions - Fix issues that prevented a clean shutdown of the whole system on bare metal and nested configurations - ARM64 support for the MSHV driver - Various other bug fixes and cleanups - Add support for Confidential VMBus for Linux guest on Hyper-V - Secure AVIC support for Linux guests on Hyper-V - Add the mshv_vtl driver to allow Linux to run as the secure kernel in a higher virtual trust level for Hyper-V * tag 'hyperv-next-signed-20251207' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (58 commits) mshv: Cleanly shutdown root partition with MSHV mshv: Use reboot notifier to configure sleep state mshv: Add definitions for MSHV sleep state configuration mshv: Add support for movable memory regions mshv: Add refcount and locking to mem regions mshv: Fix huge page handling in memory region traversal mshv: Move region management to mshv_regions.c mshv: Centralize guest memory region destruction mshv: Refactor and rename memory region handling functions mshv: adjust interrupt control structure for ARM64 Drivers: hv: use kmalloc_array() instead of kmalloc() mshv: Add ioctl for self targeted passthrough hvcalls Drivers: hv: Introduce mshv_vtl driver Drivers: hv: Export some symbols for mshv_vtl static_call: allow using STATIC_CALL_TRAMP_STR() from assembly mshv: Extend create partition ioctl to support cpu features mshv: Allow mappings that overlap in uaddr mshv: Fix create memory region overlap check mshv: add WQ_PERCPU to alloc_workqueue users Drivers: hv: Use kmalloc_array() instead of kmalloc() ...

Merge tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2025-12-06T22:01:20Z

Pull non-MM updates from Andrew Morton: - "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko) fixes a build issue and does some cleanup in ib/sys_info.c - "Implement mul_u64_u64_div_u64_roundup()" (David Laight) enhances the 64-bit math code on behalf of a PWM driver and beefs up the test module for these library functions - "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich) makes BPF symbol names, sizes, and line numbers available to the GDB debugger - "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang) adds a sysctl which can be used to cause additional info dumping when the hung-task and lockup detectors fire - "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu) adds a general base64 encoder/decoder to lib/ and migrates several users away from their private implementations - "rbree: inline rb_first() and rb_last()" (Eric Dumazet) makes TCP a little faster - "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin) reworks the KEXEC Handover interfaces in preparation for Live Update Orchestrator (LUO), and possibly for other future clients - "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin) increases the flexibility of KEXEC Handover. Also preparation for LUO - "Live Update Orchestrator" (Pasha Tatashin) is a major new feature targeted at cloud environments. Quoting the cover letter: This series introduces the Live Update Orchestrator, a kernel subsystem designed to facilitate live kernel updates using a kexec-based reboot. This capability is critical for cloud environments, allowing hypervisors to be updated with minimal downtime for running virtual machines. LUO achieves this by preserving the state of selected resources, such as memory, devices and their dependencies, across the kernel transition. As a key feature, this series includes support for preserving memfd file descriptors, which allows critical in-memory data, such as guest RAM or any other large memory region, to be maintained in RAM across the kexec reboot. Mike Rappaport merits a mention here, for his extensive review and testing work. - "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain) moves the kexec and kdump sysfs entries from /sys/kernel/ to /sys/kernel/kexec/ and adds back-compatibility symlinks which can hopefully be removed one day - "kho: fixes for vmalloc restoration" (Mike Rapoport) fixes a BUG which was being hit during KHO restoration of vmalloc() regions * tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits) calibrate: update header inclusion Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()" vmcoreinfo: track and log recoverable hardware errors kho: fix restoring of contiguous ranges of order-0 pages kho: kho_restore_vmalloc: fix initialization of pages array MAINTAINERS: TPM DEVICE DRIVER: update the W-tag init: replace simple_strtoul with kstrtoul to improve lpj_setup KHO: fix boot failure due to kmemleak access to non-PRESENT pages Documentation/ABI: new kexec and kdump sysfs interface Documentation/ABI: mark old kexec sysfs deprecated kexec: move sysfs entries to /sys/kernel/kexec test_kho: always print restore status kho: free chunks using free_page() instead of kfree() selftests/liveupdate: add kexec test for multiple and empty sessions selftests/liveupdate: add simple kexec-based selftest for LUO selftests/liveupdate: add userspace API selftests docs: add documentation for memfd preservation via LUO mm: memfd_luo: allow preserving memfd liveupdate: luo_file: add private argument to store runtime state mm: shmem: export some functions to internal.h ...

Merge tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-12-06T01:29:04Z

Pull SoC driver updates from Arnd Bergmann: "This is the first half of the driver changes: - A treewide interface change to the "syscore" operations for power management, as a preparation for future Tegra specific changes - Reset controller updates with added drivers for LAN969x, eic770 and RZ/G3S SoCs - Protection of system controller registers on Renesas and Google SoCs, to prevent trivially triggering a system crash from e.g. debugfs access - soc_device identification updates on Nvidia, Exynos and Mediatek - debugfs support in the ST STM32 firewall driver - Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI - Cleanups for memory controller support on Nvidia and Renesas" * tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits) memory: tegra186-emc: Fix missing put_bpmp Documentation: reset: Remove reset_controller_add_lookup() reset: fix BIT macro reference reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe reset: th1520: Support reset controllers in more subsystems reset: th1520: Prepare for supporting multiple controllers dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets reset: remove legacy reset lookup code clk: davinci: psc: drop unused reset lookup reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support reset: eswin: Add eic7700 reset driver dt-bindings: reset: eswin: Documentation for eic7700 SoC reset: sparx5: add LAN969x support dt-bindings: reset: microchip: Add LAN969x support soc: rockchip: grf: Add select correct PWM implementation on RK3368 soc/tegra: pmc: Add USB wake events for Tegra234 amba: tegra-ahb: Fix device leak on SMMU enable ...