kernel.git/arch/x86/kernel/cpu/mtrr, branch linux-4.14.y

x86/mtrr: Correct the range check before performing MTRR type lookups

2021-01-12T19:09:14Z

commit cb7f4a8b1fb426a175d1708f05581939c61329d4 upstream. In mtrr_type_lookup(), if the input memory address region is not in the MTRR, over 4GB, and not over the top of memory, a write-back attribute is returned. These condition checks are for ensuring the input memory address region is actually mapped to the physical memory. However, if the end address is just aligned with the top of memory, the condition check treats the address is over the top of memory, and write-back attribute is not returned. And this hits in a real use case with NVDIMM: the nd_pmem module tries to map NVDIMMs as cacheable memories when NVDIMMs are connected. If a NVDIMM is the last of the DIMMs, the performance of this NVDIMM becomes very low since it is aligned with the top of memory and its memory type is uncached-minus. Move the input end address change to inclusive up into mtrr_type_lookup(), before checking for the top of memory in either mtrr_type_lookup_{variable,fixed}() helpers. [ bp: Massage commit message. ] Fixes: 0cc705f56e40 ("x86/mm/mtrr: Clean up mtrr_type_lookup()") Signed-off-by: Ying-Tsun Huang Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20201215070721.4349-1-ying-tsun.huang@amd.com Signed-off-by: Greg Kroah-Hartman

x86/mtrr: Don't copy uninitialized gentry fields back to userspace

2018-12-29T12:39:10Z

commit 32043fa065b51e0b1433e48d118821c71b5cd65d upstream. Currently the copy_to_user of data in the gentry struct is copying uninitiaized data in field _pad from the stack to userspace. Fix this by explicitly memset'ing gentry to zero, this also will zero any compiler added padding fields that may be in struct (currently there are none). Detected by CoverityScan, CID#200783 ("Uninitialized scalar variable") Fixes: b263b31e8ad6 ("x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls") Signed-off-by: Colin Ian King Signed-off-by: Thomas Gleixner Reviewed-by: Tyler Hicks Cc: security@kernel.org Link: https://lkml.kernel.org/r/20181218172956.1440-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman

x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping

2018-02-22T14:42:24Z

commit b399151cb48db30ad1e0e93dd40d68c6d007b637 upstream. x86_mask is a confusing name which is hard to associate with the processor's stepping. Additionally, correct an indent issue in lib/cpu.c. Signed-off-by: Jia Zhang [ Updated it to more recent kernels. ] Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: bp@alien8.de Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/mtrr: Prevent CPU hotplug lock recursion

2017-08-15T11:03:47Z

Larry reported a CPU hotplug lock recursion in the MTRR code. ============================================ WARNING: possible recursive locking detected systemd-udevd/153 is trying to acquire lock: (cpu_hotplug_lock.rw_sem){.+.+.+}, at: [] stop_machine+0x16/0x30 but task is already holding lock: (cpu_hotplug_lock.rw_sem){.+.+.+}, at: [] mtrr_add_page+0x83/0x470 .... cpus_read_lock+0x48/0x90 stop_machine+0x16/0x30 mtrr_add_page+0x18b/0x470 mtrr_add+0x3e/0x70 mtrr_add_page() holds the hotplug rwsem already and calls stop_machine() which acquires it again. Call stop_machine_cpuslocked() instead. Reported-and-tested-by: Larry Finger Reported-by: Dmitry Vyukov Signed-off-by: Thomas Gleixner Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708140920250.1865@nanos Cc: "Paul E. McKenney" Cc: Borislav Petkov

x86/mtrr: Remove get_online_cpus() from mtrr_save_state()

2017-05-26T08:10:38Z

mtrr_save_state() is invoked from native_cpu_up() which is in the context of a CPU hotplug operation and therefor calling get_online_cpus() is pointless. While this works in the current get_online_cpus() implementation it prevents from converting the hotplug locking to percpu rwsems. Remove it. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner Tested-by: Paul E. McKenney Acked-by: Ingo Molnar Cc: Peter Zijlstra Cc: Steven Rostedt Link: http://lkml.kernel.org/r/20170524081547.651378834@linutronix.de

x86/boot/e820: Prefix the E820_* type names with "E820_TYPE_"

2017-01-28T21:55:22Z

So there's a number of constants that start with "E820" but which are not types - these create a confusing mixture when seen together with 'enum e820_type' values: E820MAP E820NR E820_X_MAX E820MAX To better differentiate the 'enum e820_type' values prefix them with E820_TYPE_. No change in functionality. Cc: Alex Thorlton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dan Williams Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Huang, Ying Cc: Josh Poimboeuf Cc: Juergen Gross Cc: Linus Torvalds Cc: Paul Jackson Cc: Peter Zijlstra Cc: Rafael J. Wysocki Cc: Tejun Heo Cc: Thomas Gleixner Cc: Wei Yang Cc: Yinghai Lu Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

x86/boot/e820: Create coherent API function names for E820 range operations

2017-01-28T13:42:32Z

We have these three related functions: extern void e820_add_region(u64 start, u64 size, int type); extern u64 e820_update_range(u64 start, u64 size, unsigned old_type, unsigned new_type); extern u64 e820_remove_range(u64 start, u64 size, unsigned old_type, int checktype); But it's not clear from the naming that they are 3 operations based around the same 'memory range' concept. Rename them to better signal this, and move the prototypes next to each other: extern void e820__range_add (u64 start, u64 size, int type); extern u64 e820__range_update(u64 start, u64 size, unsigned old_type, unsigned new_type); extern u64 e820__range_remove(u64 start, u64 size, unsigned old_type, int checktype); Note that this improved organization of the functions shows another problem that was easy to miss before: sometimes the E820 entry type is 'int', sometimes 'unsigned int' - but this will be fixed in a separate patch. No change in functionality. Cc: Alex Thorlton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dan Williams Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Huang, Ying Cc: Josh Poimboeuf Cc: Juergen Gross Cc: Linus Torvalds Cc: Paul Jackson Cc: Peter Zijlstra Cc: Rafael J. Wysocki Cc: Tejun Heo Cc: Thomas Gleixner Cc: Wei Yang Cc: Yinghai Lu Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

x86/boot/e820: Rename update_e820() to e820__update_table()

2017-01-28T13:42:30Z

update_e820() should have 'e820' as a prefix as most of the other E820 functions have - but it's also a bit unclear about its purpose, as it's unclear what is updated - the whole table, or an entry? Also, the name does not express that it's a trivial wrapper around sanitize_e820_table() that also prints out the resulting table. So rename it to e820__update_table_print(). This also makes it harmonize with the e820__update_table_firmware() function which has a very similar purpose. No change in functionality. Cc: Alex Thorlton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dan Williams Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Huang, Ying Cc: Josh Poimboeuf Cc: Juergen Gross Cc: Linus Torvalds Cc: Paul Jackson Cc: Peter Zijlstra Cc: Rafael J. Wysocki Cc: Tejun Heo Cc: Thomas Gleixner Cc: Wei Yang Cc: Yinghai Lu Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

x86/boot/e820: Move asm/e820.h to asm/e820/api.h

2017-01-28T08:31:13Z

In line with asm/e820/types.h, move the e820 API declarations to asm/e820/api.h and update all usage sites. This is just a mechanical, obviously correct move & replace patch, there will be subsequent changes to clean up the code and to make better use of the new header organization. Cc: Alex Thorlton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dan Williams Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Huang, Ying Cc: Josh Poimboeuf Cc: Juergen Gross Cc: Linus Torvalds Cc: Paul Jackson Cc: Peter Zijlstra Cc: Rafael J. Wysocki Cc: Tejun Heo Cc: Thomas Gleixner Cc: Wei Yang Cc: Yinghai Lu Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar