kernel.git/arch/x86/kernel/cpu/mcheck, branch linux-2.6.37.y

Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl

2010-10-22T17:52:56Z

* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2010-10-21T21:11:46Z

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (96 commits) apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets apic, x86: Check if EILVT APIC registers are available (AMD only) x86: ioapic: Call free_irte only if interrupt remapping enabled arm: Use ARCH_IRQ_INIT_FLAGS genirq, ARM: Fix boot on ARM platforms genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build x86: Switch sparse_irq allocations to GFP_KERNEL genirq: Switch sparse_irq allocator to GFP_KERNEL genirq: Make sparse_lock a mutex x86: lguest: Use new irq allocator genirq: Remove the now unused sparse irq leftovers genirq: Sanitize dynamic irq handling genirq: Remove arch_init_chip_data() x86: xen: Sanitise sparse_irq handling x86: Use sane enumeration x86: uv: Clean up the direct access to irq_desc x86: Make io_apic.c local functions static genirq: Remove irq_2_iommu x86: Speed up the irq_remapped check in hot pathes intr_remap: Simplify the code further ... Fix up trivial conflicts in arch/x86/Kconfig

Merge branch 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2010-10-21T20:20:32Z

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Remove pr_ uses of KERN_ therm_throt.c: Trivial printk message fix for a unsuitable abbreviation of 'thermal' x86: Use {push,pop}{l,q}_cfi in more places i386: Add unwind directives to syscall ptregs stubs x86-64: Use symbolics instead of raw numbers in entry_64.S x86-64: Adjust frame type at paranoid_exit: x86-64: Fix unwind annotations in syscall stubs

apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets

2010-10-20T02:42:13Z

We want the BIOS to setup the EILVT APIC registers. The offsets were hardcoded and BIOS settings were overwritten by the OS. Now, the subsystems for MCE threshold and IBS determine the LVT offset from the registers the BIOS has setup. If the BIOS setup is buggy on a family 10h system, a workaround enables IBS. If the OS determines an invalid register setup, a "[Firmware Bug]: " error message is reported. We need this change also for upcomming cpu families. Signed-off-by: Robert Richter LKML-Reference: <1286360874-1471-3-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar

llseek: automatically add .llseek fop

2010-10-15T13:53:27Z

All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann Cc: Julia Lawall Cc: Christoph Hellwig

x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order

2010-10-11T09:04:36Z

This fixes possible cases of not collecting valid error info in the MCE error thresholding groups on F10h hardware. The current code contains a subtle problem of checking only the Valid bit of MSR0000_0413 (which is MC4_MISC0 - DRAM thresholding group) in its first iteration and breaking out if the bit is cleared. But (!), this MSR contains an offset value, BlkPtr[31:24], which points to the remaining MSRs in this thresholding group which might contain valid information too. But if we bail out only after we checked the valid bit in the first MSR and not the block pointer too, we miss that other information. The thing is, MC4_MISC0[BlkPtr] is not predicated on MCi_STATUS[MiscV] or MC4_MISC0[Valid] and should be checked prior to iterating over the MCI_MISCj thresholding group, irrespective of the MC4_MISC0[Valid] setting. Signed-off-by: Borislav Petkov Cc: Signed-off-by: Ingo Molnar

x86, mce, therm_throt.c: Fix missing curly braces in error handling logic

2010-10-08T08:29:20Z

When the feature PTS is not supported by CPU, the sysfile package_power_limit_count for package should not be generated. This patch is used for fixing missing { and }. The patch is not complete as there are other error handling problems in this function - but that can wait until the merge window. Signed-off-by: Jin Dongming Reviewed-by: Fenghua Yu Acked-by: Jean Delvare Cc: Brown Len Cc: Guenter Roeck Cc: Hidetoshi Seto Cc: lm-sensors@lm-sensors.org LKML-Reference: <4C7625D1.4060201@np.css.fujitsu.com> Signed-off-by: Ingo Molnar

therm_throt.c: Trivial printk message fix for a unsuitable abbreviation of 'thermal'

2010-09-05T18:26:50Z

In unexpected_thermal_interrupt(), "LVT TMR interrupt" is used in error message. I don't think TMR is a suitable abbreviation for thermal. 1.TMR has been used in IA32 Architectures Software Developer's Manual, and is the abbreviation for Trigger Mode Register. 2.There is not an standard abbreviation "TMR" defined for thermal in IA32 Architectures Software Developer's Manual. 3.Though we could understand it as Thermal Monitor Register, it is easy to be misunderstood as a *TIMER* interrupt also. I think this patch will fix it. Signed-off-by: Jin Dongming Reviewed-by: Jean Delvare Cc: Brown Len Cc: Hidetoshi Seto Cc: Fenghua Yu LKML-Reference: <4C7C492D.5020704@np.css.fujitsu.com> Signed-off-by: Ingo Molnar

x86, mcheck: Avoid duplicate sysfs links/files for thresholding banks

2010-09-05T12:35:49Z

kobject_add_internal failed for threshold_bank2 with -EEXIST, don't try to register things with the same name in the same directory: Pid: 1, comm: swapper Tainted: G W 2.6.31 #1 Call Trace: [] ? kobject_add_internal+0x156/0x180 [] ? kobject_add+0x66/0x6b [] ? kobject_init+0x42/0x82 [] ? kobject_create_and_add+0x34/0x63 [] ? threshold_create_bank+0x14f/0x259 [] ? mce_create_device+0x8d/0x1b8 [] ? threshold_init_device+0x3f/0x80 [] ? threshold_init_device+0x0/0x80 [] ? do_one_initcall+0x4f/0x143 [] ? kernel_init+0x14c/0x1a2 [] ? child_rip+0xa/0x20 [] ? kernel_init+0x0/0x1a2 [] ? child_rip+0x0/0x20 kobject_create_and_add: kobject_add error: -17 (Probably the for_each_cpu loop should be entirely removed.) Signed-off-by: Andreas Herrmann LKML-Reference: <20100827092006.GB5348@loge.amd.com> Signed-off-by: Ingo Molnar

x86, hwmon: Fix unsafe smp_processor_id() in thermal_throttle_add_dev

2010-08-21T02:56:00Z

Fix BUG: using smp_processor_id() in preemptible thermal_throttle_add_dev. We know the cpu number when calling thermal_throttle_add_dev, so we can remove smp_processor_id call in thermal_throttle_add_dev by supplying the cpu number as argument. This should resolve kernel bugzilla 16615/16629. Signed-off-by: Sergey Senozhatsky LKML-Reference: <20100820073634.GB5209@swordfish.minsk.epam.com> Cc: Fenghua Yu Cc: Joerg Roedel Cc: Maciej Rutecki Signed-off-by: H. Peter Anvin