kernel.git/arch/x86/kernel/cpu/bugs.c, branch linux-4.20.y

cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM

2019-02-12T19:02:37Z

commit b284909abad48b07d3071a9fc9b5692b3e64914b upstream. With the following commit: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") ... the hotplug code attempted to detect when SMT was disabled by BIOS, in which case it reported SMT as permanently disabled. However, that code broke a virt hotplug scenario, where the guest is booted with only primary CPU threads, and a sibling is brought online later. The problem is that there doesn't seem to be a way to reliably distinguish between the HW "SMT disabled by BIOS" case and the virt "sibling not yet brought online" case. So the above-mentioned commit was a bit misguided, as it permanently disabled SMT for both cases, preventing future virt sibling hotplugs. Going back and reviewing the original problems which were attempted to be solved by that commit, when SMT was disabled in BIOS: 1) /sys/devices/system/cpu/smt/control showed "on" instead of "notsupported"; and 2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning. I'd propose that we instead consider #1 above to not actually be a problem. Because, at least in the virt case, it's possible that SMT wasn't disabled by BIOS and a sibling thread could be brought online later. So it makes sense to just always default the smt control to "on" to allow for that possibility (assuming cpuid indicates that the CPU supports SMT). The real problem is #2, which has a simple fix: change vmx_vm_init() to query the actual current SMT state -- i.e., whether any siblings are currently online -- instead of looking at the SMT "control" sysfs value. So fix it by: a) reverting the original "fix" and its followup fix: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") bc2d8d262cba ("cpu/hotplug: Fix SMT supported evaluation") and b) changing vmx_vm_init() to query the actual current SMT state -- instead of the sysfs control value -- to determine whether the L1TF warning is needed. This also requires the 'sched_smt_present' variable to exported, instead of 'cpu_smt_control'. Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Igor Mammedov Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Cc: Joe Mario Cc: Jiri Kosina Cc: Peter Zijlstra Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.1548794349.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman

x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE

2019-01-16T21:03:21Z

commit e4f358916d528d479c3c12bd2fd03f2d5a576380 upstream. Commit 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the remaining pieces. [ bp: Massage commit message. ] Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") Signed-off-by: WANG Chao Signed-off-by: Borislav Petkov Reviewed-by: Zhenzhong Duan Reviewed-by: Masahiro Yamada Cc: "H. Peter Anvin" Cc: Andi Kleen Cc: Andrew Morton Cc: Andy Lutomirski Cc: Arnd Bergmann Cc: Daniel Borkmann Cc: David Woodhouse Cc: Geert Uytterhoeven Cc: Jessica Yu Cc: Jiri Kosina Cc: Kees Cook Cc: Konrad Rzeszutek Wilk Cc: Luc Van Oostenryck Cc: Michal Marek Cc: Miguel Ojeda Cc: Peter Zijlstra Cc: Tim Chen Cc: Vasily Gorbik Cc: linux-kbuild@vger.kernel.org Cc: srinivas.eeda@oracle.com Cc: stable Cc: x86-ml Link: https://lkml.kernel.org/r/20181210163725.95977-1-chao.wang@ucloud.cn Signed-off-by: Greg Kroah-Hartman

x86/speculation/l1tf: Drop the swap storage limit restriction when l1tf=off

2019-01-09T16:45:54Z

commit 5b5e4d623ec8a34689df98e42d038a3b594d2ff9 upstream. Swap storage is restricted to max_swapfile_size (~16TB on x86_64) whenever the system is deemed affected by L1TF vulnerability. Even though the limit is quite high for most deployments it seems to be too restrictive for deployments which are willing to live with the mitigation disabled. We have a customer to deploy 8x 6,4TB PCIe/NVMe SSD swap devices which is clearly out of the limit. Drop the swap restriction when l1tf=off is specified. It also doesn't make much sense to warn about too much memory for the l1tf mitigation when it is forcefully disabled by the administrator. [ tglx: Folded the documentation delta change ] Fixes: 377eeaa8e11f ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2") Signed-off-by: Michal Hocko Signed-off-by: Thomas Gleixner Reviewed-by: Pavel Tatashin Reviewed-by: Andi Kleen Acked-by: Jiri Kosina Cc: Linus Torvalds Cc: Dave Hansen Cc: Andi Kleen Cc: Borislav Petkov Cc: Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181113184910.26697-1-mhocko@kernel.org Signed-off-by: Greg Kroah-Hartman

x86/speculation: Provide IBPB always command line options

2018-11-28T10:57:14Z

Provide the possibility to enable IBPB always in combination with 'prctl' and 'seccomp'. Add the extra command line options and rework the IBPB selection to evaluate the command instead of the mode selected by the STIPB switch case. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Cc: Peter Zijlstra Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Jiri Kosina Cc: Tom Lendacky Cc: Josh Poimboeuf Cc: Andrea Arcangeli Cc: David Woodhouse Cc: Tim Chen Cc: Andi Kleen Cc: Dave Hansen Cc: Casey Schaufler Cc: Asit Mallick Cc: Arjan van de Ven Cc: Jon Masters Cc: Waiman Long Cc: Greg KH Cc: Dave Stewart Cc: Kees Cook Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185006.144047038@linutronix.de

x86/speculation: Add seccomp Spectre v2 user space protection mode

2018-11-28T10:57:14Z

If 'prctl' mode of user space protection from spectre v2 is selected on the kernel command-line, STIBP and IBPB are applied on tasks which restrict their indirect branch speculation via prctl. SECCOMP enables the SSBD mitigation for sandboxed tasks already, so it makes sense to prevent spectre v2 user space to user space attacks as well. The Intel mitigation guide documents how STIPB works: Setting bit 1 (STIBP) of the IA32_SPEC_CTRL MSR on a logical processor prevents the predicted targets of indirect branches on any logical processor of that core from being controlled by software that executes (or executed previously) on another logical processor of the same core. Ergo setting STIBP protects the task itself from being attacked from a task running on a different hyper-thread and protects the tasks running on different hyper-threads from being attacked. While the document suggests that the branch predictors are shielded between the logical processors, the observed performance regressions suggest that STIBP simply disables the branch predictor more or less completely. Of course the document wording is vague, but the fact that there is also no requirement for issuing IBPB when STIBP is used points clearly in that direction. The kernel still issues IBPB even when STIBP is used until Intel clarifies the whole mechanism. IBPB is issued when the task switches out, so malicious sandbox code cannot mistrain the branch predictor for the next user space task on the same logical processor. Signed-off-by: Jiri Kosina Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Cc: Peter Zijlstra Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Tom Lendacky Cc: Josh Poimboeuf Cc: Andrea Arcangeli Cc: David Woodhouse Cc: Tim Chen Cc: Andi Kleen Cc: Dave Hansen Cc: Casey Schaufler Cc: Asit Mallick Cc: Arjan van de Ven Cc: Jon Masters Cc: Waiman Long Cc: Greg KH Cc: Dave Stewart Cc: Kees Cook Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185006.051663132@linutronix.de

x86/speculation: Enable prctl mode for spectre_v2_user

2018-11-28T10:57:13Z

Now that all prerequisites are in place: - Add the prctl command line option - Default the 'auto' mode to 'prctl' - When SMT state changes, update the static key which controls the conditional STIBP evaluation on context switch. - At init update the static key which controls the conditional IBPB evaluation on context switch. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Cc: Peter Zijlstra Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Jiri Kosina Cc: Tom Lendacky Cc: Josh Poimboeuf Cc: Andrea Arcangeli Cc: David Woodhouse Cc: Tim Chen Cc: Andi Kleen Cc: Dave Hansen Cc: Casey Schaufler Cc: Asit Mallick Cc: Arjan van de Ven Cc: Jon Masters Cc: Waiman Long Cc: Greg KH Cc: Dave Stewart Cc: Kees Cook Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185005.958421388@linutronix.de

x86/speculation: Add prctl() control for indirect branch speculation

2018-11-28T10:57:13Z

Add the PR_SPEC_INDIRECT_BRANCH option for the PR_GET_SPECULATION_CTRL and PR_SET_SPECULATION_CTRL prctls to allow fine grained per task control of indirect branch speculation via STIBP and IBPB. Invocations: Check indirect branch speculation status with - prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0); Enable indirect branch speculation with - prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0); Disable indirect branch speculation with - prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0); Force disable indirect branch speculation with - prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0); See Documentation/userspace-api/spec_ctrl.rst. Signed-off-by: Tim Chen Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Cc: Peter Zijlstra Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Jiri Kosina Cc: Tom Lendacky Cc: Josh Poimboeuf Cc: Andrea Arcangeli Cc: David Woodhouse Cc: Andi Kleen Cc: Dave Hansen Cc: Casey Schaufler Cc: Asit Mallick Cc: Arjan van de Ven Cc: Jon Masters Cc: Waiman Long Cc: Greg KH Cc: Dave Stewart Cc: Kees Cook Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185005.866780996@linutronix.de

x86/speculation: Prepare arch_smt_update() for PRCTL mode

2018-11-28T10:57:13Z

The upcoming fine grained per task STIBP control needs to be updated on CPU hotplug as well. Split out the code which controls the strict mode so the prctl control code can be added later. Mark the SMP function call argument __unused while at it. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Cc: Peter Zijlstra Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Jiri Kosina Cc: Tom Lendacky Cc: Josh Poimboeuf Cc: Andrea Arcangeli Cc: David Woodhouse Cc: Tim Chen Cc: Andi Kleen Cc: Dave Hansen Cc: Casey Schaufler Cc: Asit Mallick Cc: Arjan van de Ven Cc: Jon Masters Cc: Waiman Long Cc: Greg KH Cc: Dave Stewart Cc: Kees Cook Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185005.759457117@linutronix.de

x86/speculation: Prevent stale SPEC_CTRL msr content

2018-11-28T10:57:12Z

The seccomp speculation control operates on all tasks of a process, but only the current task of a process can update the MSR immediately. For the other threads the update is deferred to the next context switch. This creates the following situation with Process A and B: Process A task 2 and Process B task 1 are pinned on CPU1. Process A task 2 does not have the speculation control TIF bit set. Process B task 1 has the speculation control TIF bit set. CPU0 CPU1 MSR bit is set ProcB.T1 schedules out ProcA.T2 schedules in MSR bit is cleared ProcA.T1 seccomp_update() set TIF bit on ProcA.T2 ProcB.T1 schedules in MSR is not updated <-- FAIL This happens because the context switch code tries to avoid the MSR update if the speculation control TIF bits of the incoming and the outgoing task are the same. In the worst case ProcB.T1 and ProcA.T2 are the only tasks scheduling back and forth on CPU1, which keeps the MSR stale forever. In theory this could be remedied by IPIs, but chasing the remote task which could be migrated is complex and full of races. The straight forward solution is to avoid the asychronous update of the TIF bit and defer it to the next context switch. The speculation control state is stored in task_struct::atomic_flags by the prctl and seccomp updates already. Add a new TIF_SPEC_FORCE_UPDATE bit and set this after updating the atomic_flags. Check the bit on context switch and force a synchronous update of the speculation control if set. Use the same mechanism for updating the current task. Reported-by: Tim Chen Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Jiri Kosina Cc: Tom Lendacky Cc: Josh Poimboeuf Cc: Andrea Arcangeli Cc: David Woodhouse Cc: Tim Chen Cc: Andi Kleen Cc: Dave Hansen Cc: Casey Schaufler Cc: Asit Mallick Cc: Arjan van de Ven Cc: Jon Masters Cc: Waiman Long Cc: Greg KH Cc: Dave Stewart Cc: Kees Cook Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1811272247140.1875@nanos.tec.linutronix.de

x86/speculation: Split out TIF update

2018-11-28T10:57:12Z

The update of the TIF_SSBD flag and the conditional speculation control MSR update is done in the ssb_prctl_set() function directly. The upcoming prctl support for controlling indirect branch speculation via STIBP needs the same mechanism. Split the code out and make it reusable. Reword the comment about updates for other tasks. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Cc: Peter Zijlstra Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Jiri Kosina Cc: Tom Lendacky Cc: Josh Poimboeuf Cc: Andrea Arcangeli Cc: David Woodhouse Cc: Tim Chen Cc: Andi Kleen Cc: Dave Hansen Cc: Casey Schaufler Cc: Asit Mallick Cc: Arjan van de Ven Cc: Jon Masters Cc: Waiman Long Cc: Greg KH Cc: Dave Stewart Cc: Kees Cook Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185005.652305076@linutronix.de