kernel.git/arch/x86/kernel/apic, branch linux-2.6.37.y

x86: Enable the intr-remap fault handling after local APIC setup

2010-12-14T00:53:32Z

Interrupt-remapping gets enabled very early in the boot, as it determines the apic mode that the processor can use. And the current code enables the vt-d fault handling before the setup_local_APIC(). And hence the APIC LDR registers and data structure in the memory may not be initialized. So the vt-d fault handling in logical xapic/x2apic modes were broken. Fix this by enabling the vt-d fault handling in the end_local_APIC_setup() A cleaner fix of enabling fault handling while enabling intr-remapping will be addressed for v2.6.38. [ Enabling intr-remapping determines the usage of x2apic mode and the apic mode determines the fault-handling configuration. ] Signed-off-by: Kenji Kaneshige LKML-Reference: <20101201062244.541996375@intel.com> Signed-off-by: Suresh Siddha Cc: stable@kernel.org [v2.6.32+] Acked-by: Chris Wright Signed-off-by: H. Peter Anvin

x86, vt-d: Fix the vt-d fault handling irq migration in the x2apic mode

2010-12-14T00:52:52Z

In x2apic mode, we need to set the upper address register of the fault handling interrupt register of the vt-d hardware. Without this irq migration of the vt-d fault handling interrupt is broken. Signed-off-by: Kenji Kaneshige LKML-Reference: <1291225233.2648.39.camel@sbsiddha-MOBL3> Signed-off-by: Suresh Siddha Cc: stable@kernel.org [v2.6.32+] Acked-by: Chris Wright Tested-by: Takao Indoh Signed-off-by: H. Peter Anvin

x86: io_apic: Avoid unused variable warning when CONFIG_GENERIC_PENDING_IRQ=n

2010-12-09T16:43:21Z

arch/x86/kernel/apic/io_apic.c: In function 'ack_apic_level': arch/x86/kernel/apic/io_apic.c:2433: warning: unused variable 'desc' Signed-off-by: Andrew Morton LKML-Reference: <201010272107.o9RL7rse018212@imap1.linux-foundation.org> Signed-off-by: Thomas Gleixner

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2010-11-26T22:28:47Z

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: dmar, x86: Use function stubs when CONFIG_INTR_REMAP is disabled x86-64: Fix and clean up AMD Fam10 MMCONF enabling x86: UV: Address interrupt/IO port operation conflict x86: Use online node real index in calulate_tbl_offset() x86, asm: Fix binutils 2.15 build failure

x86: UV: Address interrupt/IO port operation conflict

2010-11-18T09:41:25Z

This patch for SGI UV systems addresses a problem whereby interrupt transactions being looped back from a local IOH, through the hub to a local CPU can (erroneously) conflict with IO port operations and other transactions. To workaound this we set a high bit in the APIC IDs used for interrupts. This bit appears to be ignored by the sockets, but it avoids the conflict in the hub. Signed-off-by: Dimitri Sivanich LKML-Reference: <20101116222352.GA8155@sgi.com> Signed-off-by: Ingo Molnar ___ arch/x86/include/asm/uv/uv_hub.h | 4 ++++ arch/x86/include/asm/uv/uv_mmrs.h | 19 ++++++++++++++++++- arch/x86/kernel/apic/x2apic_uv_x.c | 25 +++++++++++++++++++++++-- arch/x86/platform/uv/tlb_uv.c | 2 +- arch/x86/platform/uv/uv_time.c | 4 +++- 5 files changed, 49 insertions(+), 5 deletions(-)

x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG

2010-11-18T08:15:12Z

backtrace_mask has been used under the code context of ARCH_HAS_NMI_WATCHDOG. So put it into that context. We were warned by the following warning: arch/x86/kernel/apic/hw_nmi.c:21: warning: ‘backtrace_mask’ defined but not used Signed-off-by: Rakib Mullick Signed-off-by: Don Zickus LKML-Reference: <1289573455-3410-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar

x86, apic: Remove double #include

2010-11-10T09:21:16Z

Remove the second inclusion. Signed-off-by: Jesper Juhl LKML-Reference: Signed-off-by: Ingo Molnar

x86, UV: Update node controller MMRs

2010-11-10T09:06:38Z

A new version of the SGI UV hub node controller is being developed. A few of the MMRs (control registers) that exist on the current hub no longer exist on the new hub. Fortunately, there are alternate MMRs that are are functionally equivalent and that exist on both hubs. This patch changes the UV code to use MMRs that exist in BOTH versions of the hub node controller. Signed-off-by: Jack Steiner LKML-Reference: <20101106204056.GA27584@sgi.com> Signed-off-by: Ingo Molnar

x86: Check irq_remapped instead of remapping_enabled in destroy_irq()

2010-10-30T08:28:31Z

Russ Anderson reported: | There is a regression that is causing a NULL pointer dereference | in free_irte when shutting down xpc. git bisect narrowed it down | to git commit d585d06(intr_remap: Simplify the code further), which | changed free_irte(). Reverse applying the patch fixes the problem. We need to use irq_remapped() for each irq instead of checking only intr_remapping_enabled as there might be non remapped irqs even when remapping is enabled. [ tglx: use cfg instead of retrieving it again. Massaged changelog ] Reported-bisected-and-tested-by: Russ Anderson Signed-off-by: Yinghai Lu Cc: Suresh Siddha LKML-Reference: <4CCBD511.40607@kernel.org> Signed-off-by: Thomas Gleixner

Merge branches 'x86-fixes-for-linus' and 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2010-10-30T01:58:00Z

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, alternative: Call stop_machine_text_poke() on all cpus x86-32: Restore irq stacks NUMA-aware allocations x86, memblock: Fix early_node_mem with big reserved region. * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, uv: More Westmere support on SGI UV x86, uv: Enable Westmere support on SGI UV