kernel.git/arch/x86/kernel/apic/vector.c, branch linux-5.7.y

genirq/affinity: Make affinity setting if activated opt-in

2020-08-21T11:07:17Z

commit f0c7baca180046824e07fc5f1326e83a8fd150c7 upstream. John reported that on a RK3288 system the perf per CPU interrupts are all affine to CPU0 and provided the analysis: "It looks like what happens is that because the interrupts are not per-CPU in the hardware, armpmu_request_irq() calls irq_force_affinity() while the interrupt is deactivated and then request_irq() with IRQF_PERCPU | IRQF_NOBALANCING. Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls irq_setup_affinity() which returns early because IRQF_PERCPU and IRQF_NOBALANCING are set, leaving the interrupt on its original CPU." This was broken by the recent commit which blocked interrupt affinity setting in hardware before activation of the interrupt. While this works in general, it does not work for this particular case. As contrary to the initial analysis not all interrupt chip drivers implement an activate callback, the safe cure is to make the deferred interrupt affinity setting at activation time opt-in. Implement the necessary core logic and make the two irqchip implementations for which this is required opt-in. In hindsight this would have been the right thing to do, but ... Fixes: baedb87d1b53 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly") Reported-by: John Keeping Signed-off-by: Thomas Gleixner Tested-by: Marc Zyngier Acked-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman

irqdomain/treewide: Keep firmware node unconditionally allocated

2020-07-29T08:19:37Z

[ Upstream commit e3beca48a45b5e0e6e6a4e0124276b8248dcc9bb ] Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after creating the irqdomain. The only purpose of these FW nodes is to convey name information. When this was introduced the core code did not store the pointer to the node in the irqdomain. A recent change stored the firmware node pointer in irqdomain for other reasons and missed to notice that the usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence are broken by this. Storing a dangling pointer is dangerous itself, but in case that the domain is destroyed later on this leads to a double free. Remove the freeing of the firmware node after creating the irqdomain from all affected call sites to cure this. Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") Reported-by: Andy Shevchenko Signed-off-by: Thomas Gleixner Acked-by: Bjorn Helgaas Acked-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de Signed-off-by: Sasha Levin

genirq/affinity: Handle affinity setting on inactive interrupts correctly

2020-07-22T07:34:26Z

commit baedb87d1b53532f81b4bd0387f83b05d4f7eb9a upstream. Setting interrupt affinity on inactive interrupts is inconsistent when hierarchical irq domains are enabled. The core code should just store the affinity and not call into the irq chip driver for inactive interrupts because the chip drivers may not be in a state to handle such requests. X86 has a hacky workaround for that but all other irq chips have not which causes problems e.g. on GIC V3 ITS. Instead of adding more ugly hacks all over the place, solve the problem in the core code. If the affinity is set on an inactive interrupt then: - Store it in the irq descriptors affinity mask - Update the effective affinity to reflect that so user space has a consistent view - Don't call into the irq chip driver This is the core equivalent of the X86 workaround and works correctly because the affinity setting is established in the irq chip when the interrupt is activated later on. Note, that this is only effective when hierarchical irq domains are enabled by the architecture. Doing it unconditionally would break legacy irq chip implementations. For hierarchial irq domains this works correctly as none of the drivers can have a dependency on affinity setting in inactive state by design. Remove the X86 workaround as it is not longer required. Fixes: 02edee152d6e ("x86/apic/vector: Ignore set_affinity call for inactive interrupts") Reported-by: Ali Saidi Signed-off-by: Thomas Gleixner Tested-by: Ali Saidi Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-03-31T00:35:14Z

Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Treewide: - Cleanup of setup_irq() which is not longer required because the memory allocator is available early. Most cleanup changes come through the various maintainer trees, so the final removal of setup_irq() is postponed towards the end of the merge window. Core: - Protection against unsafe invocation of interrupt handlers and unsafe interrupt injection including a fixup of the offending PCI/AER error injection mechanism. Invoking interrupt handlers from arbitrary contexts, i.e. outside of an actual interrupt, can cause inconsistent state on the fragile x86 interrupt affinity changing hardware trainwreck. Drivers: - Second wave of support for the new ARM GICv4.1 - Multi-instance support for Xilinx and PLIC interrupt controllers - CPU-Hotplug support for PLIC - The obligatory new driver for X1000 TCU - Enhancements, cleanups and fixes all over the place" * tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) unicore32: Replace setup_irq() by request_irq() sh: Replace setup_irq() by request_irq() hexagon: Replace setup_irq() by request_irq() c6x: Replace setup_irq() by request_irq() alpha: Replace setup_irq() by request_irq() irqchip/gic-v4.1: Eagerly vmap vPEs irqchip/gic-v4.1: Add VSGI property setup irqchip/gic-v4.1: Add VSGI allocation/teardown irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks irqchip/gic-v4.1: Add initial SGI configuration irqchip/gic-v4.1: Plumb skeletal VSGI irqchip irqchip/stm32: Retrigger both in eoi and unmask callbacks irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL domain irqchip/xilinx: Do not call irq_set_default_host() irqchip/xilinx: Enable generic irq multi handler irqchip/xilinx: Fill error code when irq domain registration fails irqchip/xilinx: Add support for multiple instances ...

x86/vector: Remove warning on managed interrupt migration

2020-03-13T14:29:26Z

The vector management code assumes that managed interrupts cannot be migrated away from an online CPU. free_moved_vector() has a WARN_ON_ONCE() which triggers when a managed interrupt vector association on a online CPU is cleared. The CPU offline code uses a different mechanism which cannot trigger this. This assumption is not longer correct because the new CPU isolation feature which affects the placement of managed interrupts must be able to move a managed interrupt away from an online CPU. There are two reasons why this can happen: 1) When the interrupt is activated the affinity mask which was established in irq_create_affinity_masks() is handed in to the vector allocation code. This mask contains all CPUs to which the interrupt can be made affine to, but this does not take the CPU isolation 'managed_irq' mask into account. When the interrupt is finally requested by the device driver then the affinity is checked again and the CPU isolation 'managed_irq' mask is taken into account, which moves the interrupt to a non-isolated CPU if possible. 2) The interrupt can be affine to an isolated CPU because the non-isolated CPUs in the calculated affinity mask are not online. Once a non-isolated CPU which is in the mask comes online the interrupt is migrated to this non-isolated CPU In both cases the regular online migration mechanism is used which triggers the WARN_ON_ONCE() in free_moved_vector(). Case #1 could have been addressed by taking the isolation mask into account, but that would require a massive code change in the activation logic and the eventual migration event was accepted as a reasonable tradeoff when the isolation feature was developed. But even if #1 would be addressed, #2 would still trigger it. Of course the warning in free_moved_vector() was overlooked at that time and the above two cases which have been discussed during patch review have obviously never been tested before the final submission. So keep it simple and remove the warning. [ tglx: Rewrote changelog and added a comment to free_moved_vector() ] Fixes: 11ea68f553e2 ("genirq, sched/isolation: Isolate from handling managed interrupts") Signed-off-by: Peter Xu Signed-off-by: Thomas Gleixner Reviewed-by: Ming Lei Link: https://lkml.kernel.org/r/20200312205830.81796-1-peterx@redhat.com

x86/apic/vector: Force interupt handler invocation to irq context

2020-03-08T10:06:40Z

Sathyanarayanan reported that the PCI-E AER error injection mechanism can result in a NULL pointer dereference in apic_ack_edge(): BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 RIP: 0010:apic_ack_edge+0x1e/0x40 Call Trace: handle_edge_irq+0x7d/0x1e0 generic_handle_irq+0x27/0x30 aer_inject_write+0x53a/0x720 It crashes in irq_complete_move() which dereferences get_irq_regs() which is obviously NULL when this is called from non interrupt context. Of course the pointer could be checked, but that just papers over the real issue. Invoking the low level interrupt handling mechanism from random code can wreckage the fragile interrupt affinity mechanism of x86 as interrupts can only be moved in interrupt context or with special care when a CPU goes offline and the move has to be enforced. In the best case this triggers the warning in the MSI affinity setter, but if the call happens on the correct CPU it just corrupts state and might prevent further interrupt delivery for the affected device. Mark the APIC interrupts as unsuitable for being invoked in random contexts. This prevents the AER injection from proliferating the wreckage, but that's less broken than the current state of affairs and more correct than just papering over the problem by sprinkling random checks all over the place and silently corrupting state. Reported-by: sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/20200306130623.684591280@linutronix.de

x86/apic/vector: Warn when vector space exhaustion breaks affinity

2019-08-28T12:44:08Z

On x86, CPUs are limited in the number of interrupts they can have affined to them as they only support 256 interrupt vectors per CPU. 32 vectors are reserved for the CPU and the kernel reserves another 22 for internal purposes. That leaves 202 vectors for assignement to devices. When an interrupt is set up or the affinity is changed by the kernel or the administrator, the vector assignment code attempts to honor the requested affinity mask. If the vector space on the CPUs in that affinity mask is exhausted the code falls back to a wider set of CPUs and assigns a vector on a CPU outside of the requested affinity mask silently. While the effective affinity is reflected in the corresponding /proc/irq/$N/effective_affinity* files the silent breakage of the requested affinity can lead to unexpected behaviour for administrators. Add a pr_warn() when this happens so that adminstrators get at least informed about it in the syslog. [ tglx: Massaged changelog and made the pr_warn() more informative ] Reported-by: djuran@redhat.com Signed-off-by: Neil Horman Signed-off-by: Thomas Gleixner Tested-by: djuran@redhat.com Link: https://lkml.kernel.org/r/20190822143421.9535-1-nhorman@tuxdriver.com

Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-07-08T18:22:57Z

Pull x96 apic updates from Thomas Gleixner: "Updates for the x86 APIC interrupt handling and APIC timer: - Fix a long standing issue with spurious interrupts which was caused by the big vector management rework a few years ago. Robert Hodaszi provided finally enough debug data and an excellent initial failure analysis which allowed to understand the underlying issues. This contains a change to the core interrupt management code which is required to handle this correctly for the APIC/IO_APIC. The core changes are NOOPs for most architectures except ARM64. ARM64 is not impacted by the change as confirmed by Marc Zyngier. - Newer systems allow to disable the PIT clock for power saving causing panic in the timer interrupt delivery check of the IO/APIC when the HPET timer is not enabled either. While the clock could be turned on this would cause an endless whack a mole game to chase the proper register in each affected chipset. These systems provide the relevant frequencies for TSC, CPU and the local APIC timer via CPUID and/or MSRs, which allows to avoid the PIT/HPET based calibration. As the calibration code is the only usage of the legacy timers on modern systems and is skipped anyway when the frequencies are known already, there is no point in setting up the PIT and actually checking for the interrupt delivery via IO/APIC. To achieve this on a wide variety of platforms, the CPUID/MSR based frequency readout has been made more robust, which also allowed to remove quite some workarounds which turned out to be not longer required. Thanks to Daniel Drake for analysis, patches and verification" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Seperate unused system vectors from spurious entry again x86/irq: Handle spurious interrupt after shutdown gracefully x86/ioapic: Implement irq_get_irqchip_state() callback genirq: Add optional hardware synchronization for shutdown genirq: Fix misleading synchronize_irq() documentation genirq: Delay deactivation in free_irq() x86/timer: Skip PIT initialization on modern chipsets x86/apic: Use non-atomic operations when possible x86/apic: Make apic_bsp_setup() static x86/tsc: Set LAPIC timer period to crystal clock frequency x86/apic: Rename 'lapic_timer_frequency' to 'lapic_timer_period' x86/tsc: Use CPUID.0x16 to calculate missing crystal frequency

x86/irq: Handle spurious interrupt after shutdown gracefully

2019-07-03T08:12:30Z

Since the rework of the vector management, warnings about spurious interrupts have been reported. Robert provided some more information and did an initial analysis. The following situation leads to these warnings: CPU 0 CPU 1 IO_APIC interrupt is raised sent to CPU1 Unable to handle immediately (interrupts off, deep idle delay) mask() ... free() shutdown() synchronize_irq() clear_vector() do_IRQ() -> vector is clear Before the rework the vector entries of legacy interrupts were statically assigned and occupied precious vector space while most of them were unused. Due to that the above situation was handled silently because the vector was handled and the core handler of the assigned interrupt descriptor noticed that it is shut down and returned. While this has been usually observed with legacy interrupts, this situation is not limited to them. Any other interrupt source, e.g. MSI, can cause the same issue. After adding proper synchronization for level triggered interrupts, this can only happen for edge triggered interrupts where the IO-APIC obviously cannot provide information about interrupts in flight. While the spurious warning is actually harmless in this case it worries users and driver developers. Handle it gracefully by marking the vector entry as VECTOR_SHUTDOWN instead of VECTOR_UNUSED when the vector is freed up. If that above late handling happens the spurious detector will not complain and switch the entry to VECTOR_UNUSED. Any subsequent spurious interrupt on that line will trigger the spurious warning as before. Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode") Reported-by: Robert Hodaszi Signed-off-by: Thomas Gleixner - Tested-by: Robert Hodaszi Cc: Marc Zyngier Link: https://lkml.kernel.org/r/20190628111440.459647741@linutronix.de

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman