kernel.git/arch/x86/kernel/apic/vector.c, branch linux-4.14.y

genirq/affinity: Make affinity setting if activated opt-in

2020-08-21T07:48:23Z

commit f0c7baca180046824e07fc5f1326e83a8fd150c7 upstream. John reported that on a RK3288 system the perf per CPU interrupts are all affine to CPU0 and provided the analysis: "It looks like what happens is that because the interrupts are not per-CPU in the hardware, armpmu_request_irq() calls irq_force_affinity() while the interrupt is deactivated and then request_irq() with IRQF_PERCPU | IRQF_NOBALANCING. Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls irq_setup_affinity() which returns early because IRQF_PERCPU and IRQF_NOBALANCING are set, leaving the interrupt on its original CPU." This was broken by the recent commit which blocked interrupt affinity setting in hardware before activation of the interrupt. While this works in general, it does not work for this particular case. As contrary to the initial analysis not all interrupt chip drivers implement an activate callback, the safe cure is to make the deferred interrupt affinity setting at activation time opt-in. Implement the necessary core logic and make the two irqchip implementations for which this is required opt-in. In hindsight this would have been the right thing to do, but ... Fixes: baedb87d1b53 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly") Reported-by: John Keeping Signed-off-by: Thomas Gleixner Tested-by: Marc Zyngier Acked-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de [fllinden@amazon.com - backported to 4.14] Signed-off-by: Frank van der Linden Signed-off-by: Greg Kroah-Hartman

irqdomain/treewide: Keep firmware node unconditionally allocated

2020-07-29T05:42:52Z

[ Upstream commit e3beca48a45b5e0e6e6a4e0124276b8248dcc9bb ] Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after creating the irqdomain. The only purpose of these FW nodes is to convey name information. When this was introduced the core code did not store the pointer to the node in the irqdomain. A recent change stored the firmware node pointer in irqdomain for other reasons and missed to notice that the usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence are broken by this. Storing a dangling pointer is dangerous itself, but in case that the domain is destroyed later on this leads to a double free. Remove the freeing of the firmware node after creating the irqdomain from all affected call sites to cure this. Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") Reported-by: Andy Shevchenko Signed-off-by: Thomas Gleixner Acked-by: Bjorn Helgaas Acked-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de Signed-off-by: Sasha Levin

x86: Don't include linux/irq.h from asm/hardirq.h

2018-08-15T16:12:58Z

commit 447ae316670230d7d29430e2cbf1f5db4f49d14c upstream The next patch in this series will have to make the definition of irq_cpustat_t available to entering_irq(). Inclusion of asm/hardirq.h into asm/apic.h would cause circular header dependencies like asm/smp.h asm/apic.h asm/hardirq.h linux/irq.h linux/topology.h linux/smp.h asm/smp.h or linux/gfp.h linux/mmzone.h asm/mmzone.h asm/mmzone_64.h asm/smp.h asm/apic.h asm/hardirq.h linux/irq.h linux/irqdesc.h linux/kobject.h linux/sysfs.h linux/kernfs.h linux/idr.h linux/gfp.h and others. This causes compilation errors because of the header guards becoming effective in the second inclusion: symbols/macros that had been defined before wouldn't be available to intermediate headers in the #include chain anymore. A possible workaround would be to move the definition of irq_cpustat_t into its own header and include that from both, asm/hardirq.h and asm/apic.h. However, this wouldn't solve the real problem, namely asm/harirq.h unnecessarily pulling in all the linux/irq.h cruft: nothing in asm/hardirq.h itself requires it. Also, note that there are some other archs, like e.g. arm64, which don't have that #include in their asm/hardirq.h. Remove the linux/irq.h #include from x86' asm/hardirq.h. Fix resulting compilation errors by adding appropriate #includes to *.c files as needed. Note that some of these *.c files could be cleaned up a bit wrt. to their set of #includes, but that should better be done from separate patches, if at all. Signed-off-by: Nicolai Stange Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/apic/vector: Fix off by one in error path

2018-01-23T18:58:15Z

commit 45d55e7bac4028af93f5fa324e69958a0b868e96 upstream. Keith reported the following warning: WARNING: CPU: 28 PID: 1420 at kernel/irq/matrix.c:222 irq_matrix_remove_managed+0x10f/0x120 x86_vector_free_irqs+0xa1/0x180 x86_vector_alloc_irqs+0x1e4/0x3a0 msi_domain_alloc+0x62/0x130 The reason for this is that if the vector allocation fails the error handling code tries to free the failed vector as well, which causes the above imbalance warning to trigger. Adjust the error path to handle this correctly. Fixes: b5dc8e6c21e7 ("x86/irq: Use hierarchical irqdomain to manage CPU interrupt vectors") Reported-by: Keith Busch Signed-off-by: Thomas Gleixner Tested-by: Keith Busch Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801161217300.1823@nanos Signed-off-by: Greg Kroah-Hartman

x86/irq: Get rid of the 'first_system_vector' indirection bogosity

2017-08-29T09:42:21Z

This variable is beyond pointless. Nothing allocates a vector via alloc_gate() below FIRST_SYSTEM_VECTOR. So nothing can change first_system_vector. If there is a need for a gate below FIRST_SYSTEM_VECTOR then it can be added to the vector defines and FIRST_SYSTEM_VECTOR can be adjusted accordingly. Signed-off-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Steven Rostedt Link: http://lkml.kernel.org/r/20170828064956.357109735@linutronix.de Signed-off-by: Ingo Molnar

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-07-03T23:50:31Z

Pull irq updates from Thomas Gleixner: "The irq department delivers: - Expand the generic infrastructure handling the irq migration on CPU hotplug and convert X86 over to it. (Thomas Gleixner) Aside of consolidating code this is a preparatory change for: - Finalizing the affinity management for multi-queue devices. The main change here is to shut down interrupts which are affine to a outgoing CPU and reenabling them when the CPU comes online again. That avoids moving interrupts pointlessly around and breaking and reestablishing affinities for no value. (Christoph Hellwig) Note: This contains also the BLOCK-MQ and NVME changes which depend on the rework of the irq core infrastructure. Jens acked them and agreed that they should go with the irq changes. - Consolidation of irq domain code (Marc Zyngier) - State tracking consolidation in the core code (Jeffy Chen) - Add debug infrastructure for hierarchical irq domains (Thomas Gleixner) - Infrastructure enhancement for managing generic interrupt chips via devmem (Bartosz Golaszewski) - Constification work all over the place (Tobias Klauser) - Two new interrupt controller drivers for MVEBU (Thomas Petazzoni) - The usual set of fixes, updates and enhancements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits) irqchip/or1k-pic: Fix interrupt acknowledgement irqchip/irq-mvebu-gicp: Allocate enough memory for spi_bitmap irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity nvme: Allocate queues for all possible CPUs blk-mq: Create hctx for each present CPU blk-mq: Include all present CPUs in the default queue mapping genirq: Avoid unnecessary low level irq function calls genirq: Set irq masked state when initializing irq_desc genirq/timings: Add infrastructure for estimating the next interrupt arrival time genirq/timings: Add infrastructure to track the interrupt timings genirq/debugfs: Remove pointless NULL pointer check irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID irqchip/gic-v3-its: Add ACPI NUMA node mapping irqchip/gic-v3-its-platform-msi: Make of_device_ids const irqchip/gic-v3-its: Make of_device_ids const irqchip/irq-mvebu-icu: Add new driver for Marvell ICU irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP dt-bindings/interrupt-controller: Add DT binding for the Marvell ICU genirq/irqdomain: Remove auto-recursive hierarchy support irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded access ...

x86/apic: Mark single target interrupts

2017-06-22T16:21:26Z

If the interrupt destination mode of the APIC is physical then the effective affinity is restricted to a single CPU. Mark the interrupt accordingly in the domain allocation code, so the core code can avoid pointless affinity setting attempts. Signed-off-by: Thomas Gleixner Cc: Jens Axboe Cc: Marc Zyngier Cc: Michael Ellerman Cc: Keith Busch Cc: Peter Zijlstra Cc: Christoph Hellwig Link: http://lkml.kernel.org/r/20170619235447.508846202@linutronix.de

x86/apic: Add irq_data argument to apic->cpu_mask_to_apicid()

2017-06-22T16:21:22Z

The decision to which CPUs an interrupt is effectively routed happens in the various apic->cpu_mask_to_apicid() implementations To support effective affinity masks this information needs to be updated in irq_data. Add a pointer to irq_data to the callbacks and feed it through the call chain. Signed-off-by: Thomas Gleixner Cc: Jens Axboe Cc: Marc Zyngier Cc: Michael Ellerman Cc: Keith Busch Cc: Peter Zijlstra Cc: Christoph Hellwig Link: http://lkml.kernel.org/r/20170619235446.720739075@linutronix.de

x86/apic: Move cpumask and to core code

2017-06-22T16:21:22Z

All implementations of apic->cpu_mask_to_apicid_and() and the two incoming cpumasks to search for the target. Move that operation to the call site and rename it to cpu_mask_to_apicid() Signed-off-by: Thomas Gleixner Cc: Jens Axboe Cc: Marc Zyngier Cc: Michael Ellerman Cc: Keith Busch Cc: Peter Zijlstra Cc: Christoph Hellwig Link: http://lkml.kernel.org/r/20170619235446.641575516@linutronix.de

x86/apic: Move online masking to core code

2017-06-22T16:21:21Z

All implementations of apic->cpu_mask_to_apicid_and() mask out the offline cpus. The callsite already has a mask available, which has the offline CPUs removed. Use that and remove the extra bits. Signed-off-by: Thomas Gleixner Cc: Jens Axboe Cc: Marc Zyngier Cc: Michael Ellerman Cc: Keith Busch Cc: Peter Zijlstra Cc: Christoph Hellwig Link: http://lkml.kernel.org/r/20170619235446.560868224@linutronix.de