kernel.git/arch/x86/kernel/acpi, branch linux-4.8.y

ACPI/PCI: pci_link: penalize SCI correctly

2016-11-18T09:51:51Z

commit f1caa61df2a3dc4c58316295c5dc5edba4c68d85 upstream. Ondrej reported that IRQs stopped working in v4.7 on several platforms. A typical scenario, from Ondrej's VT82C694X/694X, is: ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: No IRQ available for PCI Interrupt Link [LNKA] 8139too 0000:00:0f.0: PCI INT A: no GSI We're using PIC routing, so acpi_irq_balance == 0, and LNKA is already active at IRQ 11. In that case, acpi_pci_link_allocate() only tries to use the active IRQ (IRQ 11) which also happens to be the SCI. We should penalize the SCI by PIRQ_PENALTY_PCI_USING, but irq_get_trigger_type(11) returns something other than IRQ_TYPE_LEVEL_LOW, so we penalize it by PIRQ_PENALTY_ISA_ALWAYS instead, which makes acpi_pci_link_allocate() assume the IRQ isn't available and give up. Add acpi_penalize_sci_irq() so platforms can tell us the SCI IRQ, trigger, and polarity directly and we don't have to depend on irq_get_trigger_type(). Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Link: http://lkml.kernel.org/r/201609251512.05657.linux@rainbow-software.org Reported-by: Ondrej Zary Acked-by: Bjorn Helgaas Signed-off-by: Sinan Kaya Tested-by: Jonathan Liu Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

x86/apic: Get rid of apic_version[] array

2016-10-16T16:03:40Z

commit cff9ab2b291e64259d97add48fe073c081afe4e2 upstream. The array has a size of MAX_LOCAL_APIC, which can be as large as 32k, so it can consume up to 128k. The array has been there forever and was never used for anything useful other than a version mismatch check which was introduced in 2009. There is no reason to store the version in an array. The kernel is not prepared to handle different APIC versions anyway, so the real important part is to detect a version mismatch and warn about it, which can be done with a single variable as well. [ tglx: Massaged changelog ] Signed-off-by: Denys Vlasenko CC: Andy Lutomirski CC: Borislav Petkov CC: Brian Gerst CC: Mike Travis Link: http://lkml.kernel.org/r/20160913181232.30815-1-dvlasenk@redhat.com Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge branch 'x86-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-08-01T18:23:42Z

Pull x86 header cleanups from Ingo Molnar: "This tree is a cleanup of the x86 tree reducing spurious uses of module.h - which should improve build performance a bit" * 'x86-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, crypto: Restore MODULE_LICENSE() to glue_helper.c so it loads x86/apic: Remove duplicated include from probe_64.c x86/ce4100: Remove duplicated include from ce4100.c x86/headers: Include spinlock_types.h in x8664_ksyms_64.c for missing spinlock_t x86/platform: Delete extraneous MODULE_* tags fromm ts5500 x86: Audit and remove any remaining unnecessary uses of module.h x86/kvm: Audit and remove any unnecessary uses of module.h x86/xen: Audit and remove any unnecessary uses of module.h x86/platform: Audit and remove any unnecessary uses of module.h x86/lib: Audit and remove any unnecessary uses of module.h x86/kernel: Audit and remove any unnecessary uses of module.h x86/mm: Audit and remove any unnecessary uses of module.h x86: Don't use module.h just for AUTHOR / LICENSE tags

x86/acpi: store ACPI ids from MADT for future usage

2016-07-25T12:30:53Z

Currently we don't save ACPI ids (unlike LAPIC ids which go to x86_cpu_to_apicid) from MADT and we may need this information later. Particularly, ACPI ids is the only existent way for a PVHVM Xen guest to figure out Xen's idea of its vCPUs ids before these CPUs boot and in some cases these ids diverge from Linux's cpu ids. Signed-off-by: Vitaly Kuznetsov Signed-off-by: David Vrabel

x86/kernel: Audit and remove any unnecessary uses of module.h

2016-07-14T13:06:41Z

Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. Build testing revealed some implicit header usage that was fixed up accordingly. Note that some bool/obj-y instances remain since module.h is the header for some exception table entry stuff, and for things like __init_or_module (code that is tossed when MODULES=n). Signed-off-by: Paul Gortmaker Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20160714001901.31603-4-paul.gortmaker@windriver.com Signed-off-by: Ingo Molnar

Merge tag 'acpi-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2016-05-17T02:41:41Z

Pull ACPI updates from Rafael Wysocki: "The new features here are ACPI 6.1 support (and some previously missing bits of ACPI 6.0 support) in ACPICA and two new drivers, a driver for the ACPI Generic Event Device (GED) feature introduced by ACPI 6.1 and the INT3406 thermal driver for display thermal management. Also the value returned by the _HRV (hardware revision) ACPI object will be exported to user space via sysfs now. In addition to that, ACPI on ARM64 will not depend on EXPERT any more. The rest is mostly fixes and cleanups and some code reorganization. Specifics: - In-kernel ACPICA code update to the upstream release 20160422 adding support for ACPI 6.1 along with some previously missing bits of ACPI 6.0 support, making a fair amount of fixes and cleanups and reducing divergences between the upstream ACPICA and the in-kernel code (Bob Moore, Lv Zheng, Al Stone, Aleksey Makarov, Will Miles) - ACPI Generic Event Device (GED) support and a fix for it (Sinan Kaya, Paul Gortmaker) - INT3406 thermal driver for display thermal management and ACPI backlight support code reorganization related to it (Aaron Lu, Arnd Bergmann) - Support for exporting the value returned by the _HRV (hardware revision) ACPI object via sysfs (Betty Dall) - Removal of the EXPERT dependency for ACPI on ARM64 (Mark Brown) - Rework of the handling of ACPI _OSI mechanism allowing the _OSI("Darwin") support to be overridden from the kernel command line among other things (Lv Zheng, Chen Yu) - Rework of the ACPI tables override mechanism to prepare it for the introduction of overlays support going forward (Lv Zheng, Rafael Wysocki) - Fixes related to the ECDT support and module-level execution of AML (Lv Zheng) - ACPI PCI interrupts management update to make it work better on ARM64 mostly (Sinan Kaya) - ACPI SRAT handling update to make the code process all entires in the table order regardless of the entry type (Lukasz Anaczkowski) - EFI power off support for full-hardware ACPI platforms that don't support ACPI S5 (Chen Yu) - Fixes and cleanups related to the ACPI core's sysfs interface (Dan Carpenter, Betty Dall) - acpi_dev_present() API rework to reduce possible confusion related to it (Lukas Wunner) - Removal of CLK_IS_ROOT from two ACPI drivers (Stephen Boyd)" * tag 'acpi-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (82 commits) ACPI / video: mark acpi_video_get_levels() inline Thermal / ACPI / video: add INT3406 thermal driver ACPI / GED: make evged.c explicitly non-modular ACPI / tables: Fix DSDT override mechanism ACPI / sysfs: fix error code in get_status() ACPICA: Update version to 20160422 ACPICA: Move all ASCII utilities to a common file ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write() ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support in acpi_hw_read() ACPICA: Executer: Introduce a set of macros to handle bit width mask generation ACPICA: Hardware: Add optimized access bit width support ACPICA: Utilities: Add ACPI_IS_ALIGNED() macro ACPICA: Renamed some #defined flag constants for clarity ACPICA: ACPI 6.0, tools/iasl: Add support for new resource descriptors ACPICA: ACPI 6.0: Update _BIX support for new package element ACPICA: ACPI 6.1: Support for new PCCT subtable ACPICA: Refactor evaluate_object to reduce nesting ACPICA: Divergence: remove unwanted spaces for typedef ACPI,PCI,IRQ: remove SCI penalize function ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init() ..

Merge branch 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-05-16T22:54:01Z

Pull x86 boot updates from Ingo Molnar: "The biggest changes in this cycle were: - prepare for more KASLR related changes, by restructuring, cleaning up and fixing the existing boot code. (Kees Cook, Baoquan He, Yinghai Lu) - simplifly/concentrate subarch handling code, eliminate paravirt_enabled() usage. (Luis R Rodriguez)" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) x86/KASLR: Clarify purpose of each get_random_long() x86/KASLR: Add virtual address choosing function x86/KASLR: Return earliest overlap when avoiding regions x86/KASLR: Add 'struct slot_area' to manage random_addr slots x86/boot: Add missing file header comments x86/KASLR: Initialize mapping_info every time x86/boot: Comment what finalize_identity_maps() does x86/KASLR: Build identity mappings on demand x86/boot: Split out kernel_ident_mapping_init() x86/boot: Clean up indenting for asm/boot.h x86/KASLR: Improve comments around the mem_avoid[] logic x86/boot: Simplify pointer casting in choose_random_location() x86/KASLR: Consolidate mem_avoid[] entries x86/boot: Clean up pointer casting x86/boot: Warn on future overlapping memcpy() use x86/boot: Extract error reporting functions x86/boot: Correctly bounds-check relocations x86/KASLR: Clean up unused code from old 'run_size' and rename it to 'kernel_total_size' x86/boot: Fix "run_size" calculation x86/boot: Calculate decompression size during boot not build ...

ACPI,PCI,IRQ: remove SCI penalize function

2016-05-04T23:10:32Z

Removing the SCI penalize function as the penalty is now calculated on the fly. Signed-off-by: Sinan Kaya Acked-by: Bjorn Helgaas Signed-off-by: Rafael J. Wysocki

x86/ACPI: Parse ACPI_FADT_LEGACY_DEVICES

2016-04-22T08:29:06Z

ACPI 5.2.9.3 IA-PC Boot Architecture flag ACPI_FADT_LEGACY_DEVICES can be used to determine if a system has legacy devices LPC or ISA devices. The x86 platform already has a struct which lists known associated legacy devices, we start off careful only by disabling root devices we should not regress with. The struct and device list can be expanded with time to cover more root legacy components. Signed-off-by: Luis R. Rodriguez Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: andrew.cooper3@citrix.com Cc: andriy.shevchenko@linux.intel.com Cc: bigeasy@linutronix.de Cc: boris.ostrovsky@oracle.com Cc: david.vrabel@citrix.com Cc: ffainelli@freebox.fr Cc: george.dunlap@citrix.com Cc: glin@suse.com Cc: jgross@suse.com Cc: jlee@suse.com Cc: josh@joshtriplett.org Cc: julien.grall@linaro.org Cc: konrad.wilk@oracle.com Cc: kozerkov@parallels.com Cc: lenb@kernel.org Cc: lguest@lists.ozlabs.org Cc: linux-acpi@vger.kernel.org Cc: lv.zheng@intel.com Cc: matt@codeblueprint.co.uk Cc: mbizon@freebox.fr Cc: rjw@rjwysocki.net Cc: robert.moore@intel.com Cc: rusty@rustcorp.com.au Cc: tiwai@suse.de Cc: toshi.kani@hp.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1460592286-300-13-git-send-email-mcgrof@kernel.org Signed-off-by: Ingo Molnar

x86/ACPI: Move ACPI_FADT_NO_CMOS_RTC check to ACPI boot code

2016-04-22T08:29:01Z

This moves the ACPI specific check into the ACPI boot code, it also takes advantage of the x86_platform.legacy.rtc which is checked for already on the RTC initialization code. This lets us remove the nasty #ifdefery and consolidate the checks to use only one toggle to disable the RTC init code. The works as RTC is initialized by device_initcall(add_rtc_cmos), this will run late in boot on start_kernel() during rest_init(), acpi_parse_fadt() gets called earlier during setup_arch(). Signed-off-by: Luis R. Rodriguez Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: andrew.cooper3@citrix.com Cc: andriy.shevchenko@linux.intel.com Cc: bigeasy@linutronix.de Cc: boris.ostrovsky@oracle.com Cc: david.vrabel@citrix.com Cc: ffainelli@freebox.fr Cc: george.dunlap@citrix.com Cc: glin@suse.com Cc: jgross@suse.com Cc: jlee@suse.com Cc: josh@joshtriplett.org Cc: julien.grall@linaro.org Cc: konrad.wilk@oracle.com Cc: kozerkov@parallels.com Cc: lenb@kernel.org Cc: lguest@lists.ozlabs.org Cc: linux-acpi@vger.kernel.org Cc: lv.zheng@intel.com Cc: matt@codeblueprint.co.uk Cc: mbizon@freebox.fr Cc: rjw@rjwysocki.net Cc: robert.moore@intel.com Cc: rusty@rustcorp.com.au Cc: tiwai@suse.de Cc: toshi.kani@hp.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1460592286-300-6-git-send-email-mcgrof@kernel.org Signed-off-by: Ingo Molnar