kernel.git/arch/x86/include/asm/uv, branch linux-4.19.y

x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls

2019-02-20T09:25:48Z

commit f331e766c4be33f4338574f3c9f7f77e98ab4571 upstream. Calls into UV firmware must be protected against concurrency, expose the efi_runtime_lock to the UV platform, and use it to serialise UV BIOS calls. Signed-off-by: Hedi Berriche Signed-off-by: Borislav Petkov Reviewed-by: Ard Biesheuvel Reviewed-by: Russ Anderson Reviewed-by: Dimitri Sivanich Reviewed-by: Mike Travis Cc: Andy Shevchenko Cc: Bhupesh Sharma Cc: Darren Hart Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: linux-efi Cc: platform-driver-x86@vger.kernel.org Cc: stable@vger.kernel.org # v4.9+ Cc: Steve Wahl Cc: Thomas Gleixner Cc: x86-ml Link: https://lkml.kernel.org/r/20190213193413.25560-5-hedi.berriche@hpe.com Signed-off-by: Greg Kroah-Hartman

x86/platform/uv: Provide is_early_uv_system()

2018-10-02T19:29:16Z

Introduce is_early_uv_system() which uses efi.uv_systab to decide early in the boot process whether the kernel runs on a UV system. This is needed to skip other early setup/init code that might break the UV platform if done too early such as before necessary ACPI tables parsing takes place. Suggested-by: Hedi Berriche Signed-off-by: Mike Travis Signed-off-by: Thomas Gleixner Reviewed-by: Russ Anderson Reviewed-by: Dimitri Sivanich Cc: "H. Peter Anvin" Cc: Russ Anderson Cc: Dimitri Sivanich Cc: Borislav Petkov Cc: Kate Stewart Cc: Greg Kroah-Hartman Cc: Philippe Ombredanne Cc: Pavel Tatashin Cc: Peter Zijlstra Cc: Len Brown Cc: Dou Liyang Cc: Xiaoming Gao Cc: Rajvi Jingar Link: https://lkml.kernel.org/r/20181002180144.801700401@stormcage.americas.sgi.com

x86/platform/UV: Fix critical UV MMR address error

2018-03-28T18:19:45Z

A critical error was found testing the fixed UV4 HUB in that an MMR address was found to be incorrect. This causes the virtual address space for accessing the MMIOH1 region to be allocated with the incorrect size. Fixes: 673aa20c55a1 ("x86/platform/UV: Update uv_mmrs.h to prepare for UV4A fixes") Signed-off-by: Mike Travis Signed-off-by: Thomas Gleixner Cc: Dimitri Sivanich Cc: Russ Anderson Cc: Andrew Banman Link: https://lkml.kernel.org/r/20180328174011.041801248@stormcage.americas.sgi.com

x86/platform/uv/BAU: Replace hard-coded values with MMR definitions

2018-01-16T02:58:38Z

Replaces hard-coded node ID shift for the descriptor base MMR to fix initialization on UV4A while maintaining support for previous architectures. Signed-off-by: Andrew Banman Acked-by: Mike Travis Cc: Andrew Morton Cc: Dimitri Sivanich Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Russ Anderson Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1515440592-44060-1-git-send-email-abanman@hpe.com Signed-off-by: Ingo Molnar

x86/platform/UV: Fix UV4A BAU MMRs

2018-01-16T02:58:38Z

Fixes to accommodate Intel Processor changes for UV4A broadcast assist unit (BAU) MMRs. Signed-off-by: Mike Travis Acked-by: Andrew Banman Cc: Andrew Morton Cc: Dimitri Sivanich Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Russ Anderson Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1515440405-20880-7-git-send-email-mike.travis@hpe.com Signed-off-by: Ingo Molnar

x86/platform/UV: Fix GAM MMR changes in UV4A

2018-01-16T02:58:37Z

Intel processor changes necessitated UV4 HUB Global Address Memory (GAM) fixes to accommodate support for those processors. This patch deals with the updated address range change from 46 to 52 bits in UV4A. Signed-off-by: Mike Travis Acked-by: Andrew Banman Cc: Andrew Morton Cc: Dimitri Sivanich Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Russ Anderson Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1515440405-20880-5-git-send-email-mike.travis@hpe.com Signed-off-by: Ingo Molnar

x86/platform/UV: Add references to access fixed UV4A HUB MMRs

2018-01-16T02:58:37Z

Add references to enable access to fixed UV4A (rev2) HUB MMRs. Signed-off-by: Mike Travis Acked-by: Andrew Banman Cc: Andrew Morton Cc: Dimitri Sivanich Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Russ Anderson Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1515440405-20880-4-git-send-email-mike.travis@hpe.com Signed-off-by: Ingo Molnar

x86/platform/UV: Update uv_mmrs.h to prepare for UV4A fixes

2018-01-16T02:58:36Z

Regenerate uv_mmrs.h file to accommodate fixes to UV4A MMRs. Signed-off-by: Mike Travis Acked-by: Andrew Banman Cc: Andrew Morton Cc: Dimitri Sivanich Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Russ Anderson Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1515440405-20880-2-git-send-email-mike.travis@hpe.com Signed-off-by: Ingo Molnar

Merge branch 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-11-14T03:07:38Z

Pull x86 timer updates from Thomas Gleixner: "These updates are related to TSC handling: - Support platforms which have synchronized TSCs but the boot CPU has a non zero TSC_ADJUST value, which is considered a firmware bug on normal systems. This applies to HPE/SGI UV platforms where the platform firmware uses TSC_ADJUST to ensure TSC synchronization across a huge number of sockets, but due to power on timings the boot CPU cannot be guaranteed to have a zero TSC_ADJUST register value. - Fix the ordering of udelay calibration and kvmclock_init() - Cleanup the udelay and calibration code" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Mark cyc2ns_init() and detect_art() __init x86/platform/UV: Mark tsc_check_sync as an init function x86/tsc: Make CONFIG_X86_TSC=n build work again x86/platform/UV: Add check of TSC state set by UV BIOS x86/tsc: Provide a means to disable TSC ART x86/tsc: Drastically reduce the number of firmware bug warnings x86/tsc: Skip TSC test and error messages if already unstable x86/tsc: Add option that TSC on Socket 0 being non-zero is valid x86/timers: Move simple_udelay_calibration() past kvmclock_init() x86/timers: Make recalibrate_cpu_khz() void x86/timers: Move the simple udelay calibration to tsc.h

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman