kernel.git/arch/x86/include/asm/trace, branch linux-4.14.y

x86/fpu/debug: Remove unused 'x86_fpu_state' and 'x86_fpu_deactivate_state' tracepoints

2017-12-25T13:26:13Z

commit 127a1bea40f7f2a36bc7207ea4d51bb6b4e936fa upstream. Commit: d1898b733619 ("x86/fpu: Add tracepoints to dump FPU state at key points") ... added the 'x86_fpu_state' and 'x86_fpu_deactivate_state' trace points, but never used them. Today they are still not used. As they take up and waste memory, remove them. Signed-off-by: Steven Rostedt (VMware) Cc: Dave Hansen Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20171012180619.670b68b6@gandalf.local.home Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/fpu: Rename fpu::fpstate_active to fpu::initialized

2017-09-26T07:43:36Z

The x86 FPU code used to have a complex state machine where both the FPU registers and the FPU state context could be 'active' (or inactive) independently of each other - which enabled features like lazy FPU restore. Much of this complexity is gone in the current code: now we basically can have FPU-less tasks (kernel threads) that don't use (and save/restore) FPU state at all, plus full FPU users that save/restore directly with no laziness whatsoever. But the fpu::fpstate_active still carries bits of the old complexity - meanwhile this flag has become a simple flag that shows whether the FPU context saving area in the thread struct is initialized and used, or not. Rename it to fpu::initialized to express this simplicity in the name as well. Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: Eric Biggers Cc: Fenghua Yu Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Rik van Riel Cc: Thomas Gleixner Cc: Yu-cheng Yu Link: http://lkml.kernel.org/r/20170923130016.21448-30-mingo@kernel.org Signed-off-by: Ingo Molnar

x86/fpu: Remove struct fpu::fpregs_active

2017-09-24T11:04:34Z

The previous changes paved the way for the removal of the fpu::fpregs_active state flag - we now only have the fpu::fpstate_active and fpu::last_cpu fields left. Cc: Andrew Morton Cc: Andy Lutomirski Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: Eric Biggers Cc: Fenghua Yu Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Rik van Riel Cc: Thomas Gleixner Cc: Yu-cheng Yu Link: http://lkml.kernel.org/r/20170923130016.21448-21-mingo@kernel.org Signed-off-by: Ingo Molnar

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-09-07T16:25:15Z

Pull x86 platform updates from Ingo Molnar: "The main changes include various Hyper-V optimizations such as faster hypercalls and faster/better TLB flushes - and there's also some Intel-MID cleanups" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing/hyper-v: Trace hyperv_mmu_flush_tlb_others() x86/hyper-v: Support extended CPU ranges for TLB flush hypercalls x86/platform/intel-mid: Make several arrays static, to make code smaller MAINTAINERS: Add missed file for Hyper-V x86/hyper-v: Use hypercall for remote TLB flush hyper-v: Globalize vp_index x86/hyper-v: Implement rep hypercalls hyper-v: Use fast hypercall for HVCALL_SIGNAL_EVENT x86/hyper-v: Introduce fast hypercall implementation x86/hyper-v: Make hv_do_hypercall() inline x86/hyper-v: Include hyperv/ only when CONFIG_HYPERV is set x86/platform/intel-mid: Make 'bt_sfi_data' const x86/platform/intel-mid: Make IRQ allocation a bit more flexible x86/platform/intel-mid: Group timers callbacks together

tracing/hyper-v: Trace hyperv_mmu_flush_tlb_others()

2017-08-31T12:20:37Z

Add Hyper-V tracing subsystem and trace hyperv_mmu_flush_tlb_others(). Tracing is done the same way we do xen_mmu_flush_tlb_others(). Signed-off-by: Vitaly Kuznetsov Reviewed-by: Andy Shevchenko Reviewed-by: Stephen Hemminger Reviewed-by: Steven Rostedt (VMware) Cc: Andy Lutomirski Cc: Haiyang Zhang Cc: Jork Loeser Cc: K. Y. Srinivasan Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Simon Xiao Cc: Thomas Gleixner Cc: devel@linuxdriverproject.org Link: http://lkml.kernel.org/r/20170802160921.21791-10-vkuznets@redhat.com Signed-off-by: Ingo Molnar

x86/tracing: Build tracepoints only when they are used

2017-08-29T10:07:24Z

The tracepoint macro magic emits code for all tracepoints in a event header file. That code stays around even if the tracepoint is not used at all. The linker does not discard it. Build the various irq_vector tracepoints dependent on the appropriate CONFIG switches. Signed-off-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Steven Rostedt Link: http://lkml.kernel.org/r/20170828064957.770651777@linutronix.de Signed-off-by: Ingo Molnar

x86/tracing: Disentangle pagefault and resched IPI tracing key

2017-08-29T09:42:29Z

The pagefault and the resched IPI handler are the only ones where it is worth to optimize the code further in case tracepoints are disabled. But it makes no sense to have a single static key for both. Seperate the static keys so the facilities are handled seperately. Signed-off-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Steven Rostedt Link: http://lkml.kernel.org/r/20170828064957.536699116@linutronix.de Signed-off-by: Ingo Molnar

x86/tracing: Introduce a static key for exception tracing

2017-08-29T09:42:23Z

Switching the IDT just for avoiding tracepoints creates a completely impenetrable macro/inline/ifdef mess. There is no point in avoiding tracepoints for most of the traps/exceptions. For the more expensive tracepoints, like pagefaults, this can be handled with an explicit static key. Preparatory patch to remove the tracing IDT. Signed-off-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Steven Rostedt Link: http://lkml.kernel.org/r/20170828064956.593094539@linutronix.de Signed-off-by: Ingo Molnar

Merge tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2016-12-15T21:49:34Z

Pull tracing updates from Steven Rostedt: "This release has a few updates: - STM can hook into the function tracer - Function filtering now supports more advance glob matching - Ftrace selftests updates and added tests - Softirq tag in traces now show only softirqs - ARM nop added to non traced locations at compile time - New trace_marker_raw file that allows for binary input - Optimizations to the ring buffer - Removal of kmap in trace_marker - Wakeup and irqsoff tracers now adhere to the set_graph_notrace file - Other various fixes and clean ups" * tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (42 commits) selftests: ftrace: Shift down default message verbosity kprobes/trace: Fix kprobe selftest for newer gcc tracing/kprobes: Add a helper method to return number of probe hits tracing/rb: Init the CPU mask on allocation tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results tracing/fgraph: Have wakeup and irqsoff tracers ignore graph functions too fgraph: Handle a case where a tracer ignores set_graph_notrace tracing: Replace kmap with copy_from_user() in trace_marker writing ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it tracing: Allow benchmark to be enabled at early_initcall() tracing: Have system enable return error if one of the events fail tracing: Do not start benchmark on boot up tracing: Have the reg function allow to fail ring-buffer: Force rb_end_commit() and rb_set_commit_to_write() inline ring-buffer: Froce rb_update_write_stamp() to be inlined ring-buffer: Force inline of hotpath helper functions tracing: Make __buffer_unlock_commit() always_inline tracing: Make tracepoint_printk a static_key ring-buffer: Always inline rb_event_data() ring-buffer: Make rb_reserve_next_event() always inlined ...