kernel.git/arch/x86/include/asm/pgtable_32.h, branch linux-4.14.y

x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table

2018-03-09T06:41:07Z

commit 945fd17ab6bab8a4d05da6c3170519fbcfe62ddb upstream. The separation of the cpu_entry_area from the fixmap missed the fact that on 32bit non-PAE kernels the cpu_entry_area mapping might not be covered in initial_page_table by the previous synchronizations. This results in suspend/resume failures because 32bit utilizes initial page table for resume. The absence of the cpu_entry_area mapping results in a triple fault, aka. insta reboot. With PAE enabled this works by chance because the PGD entry which covers the fixmap and other parts incindentally provides the cpu_entry_area mapping as well. Synchronize the initial page table after setting up the cpu entry area. Instead of adding yet another copy of the same code, move it to a function and invoke it from the various places. It needs to be investigated if the existing calls in setup_arch() and setup_per_cpu_areas() can be replaced by the later invocation from setup_cpu_entry_areas(), but that's beyond the scope of this fix. Fixes: 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap") Reported-by: Woody Suwalski Signed-off-by: Thomas Gleixner Tested-by: Woody Suwalski Cc: William Grant Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802282137290.1392@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman

x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]()

2018-02-22T14:42:24Z

commit 1299ef1d8870d2d9f09a5aadf2f8b2c887c2d033 upstream. flush_tlb_single() and flush_tlb_one() sound almost identical, but they really mean "flush one user translation" and "flush one kernel translation". Rename them to flush_tlb_one_user() and flush_tlb_one_kernel() to make the semantics more obvious. [ I was looking at some PTI-related code, and the flush-one-address code is unnecessarily hard to understand because the names of the helpers are uninformative. This came up during PTI review, but no one got around to doing it. ] Signed-off-by: Andy Lutomirski Acked-by: Peter Zijlstra (Intel) Cc: Boris Ostrovsky Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Eduardo Valentin Cc: Hugh Dickins Cc: Josh Poimboeuf Cc: Juergen Gross Cc: Kees Cook Cc: Linus Torvalds Cc: Linux-MM Cc: Rik van Riel Cc: Thomas Gleixner Cc: Will Deacon Link: http://lkml.kernel.org/r/3303b02e3c3d049dc5235d5651e0ae6d29a34354.1517414378.git.luto@kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/headers: Simplify asm/fixmap.h inclusion into asm/pgtable*.h

2017-03-21T07:21:17Z

Instead of including fixmap.h twice in pgtable_32.h and pgtable_64.h, include it only once, in the common asm/pgtable.h header. Signed-off-by: Thomas Garnier Cc: Alexander Potapenko Cc: Andrew Morton Cc: Andrey Ryabinin Cc: Andy Lutomirski Cc: Boris Ostrovsky Cc: Borislav Petkov Cc: Chris Wilson Cc: Dave Hansen Cc: Dmitry Vyukov Cc: Hugh Dickins Cc: Kees Cook Cc: Linus Torvalds Cc: Matthew Wilcox Cc: Michal Hocko Cc: Paul Gortmaker Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Xiao Guangrong Cc: kasan-dev@googlegroups.com Cc: kernel-hardening@lists.openwall.com Cc: linux-mm@kvack.org Cc: richard.weiyang@gmail.com Cc: zijun_hu Link: http://lkml.kernel.org/r/20170321071725.GA15782@gmail.com [ Generated this patch from two other patches and wrote changelog. ] Signed-off-by: Ingo Molnar

x86/boot/32: Convert the 32-bit pgtable setup code from assembly to C

2017-01-06T07:39:26Z

The new Xen PVH entry point requires page tables to be setup by the kernel since it is entered with paging disabled. Pull the common code out of head_32.S so that mk_early_pgtbl_32() can be invoked from both the new Xen entry point and the existing startup_32() code. Convert resulting common code to C. Signed-off-by: Boris Ostrovsky Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: matt@codeblueprint.co.uk Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1481215471-9639-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Ingo Molnar

x86: Remove set_pmd_pfn

2014-09-01T08:15:31Z

The last user of set_pmd_pfn() went away in commit f03574f2d5b2, so this has been dead code for over a year. Signed-off-by: Matthew Wilcox Signed-off-by: Thomas Gleixner arch/x86/include/asm/pgtable_32.h | 3 --- arch/x86/mm/pgtable_32.c | 35 ----------------------------------- 2 files changed, 38 deletions(-)

x86/mm: Convert update_mmu_cache() and update_mmu_cache_pmd() to functions

2013-01-24T15:12:13Z

Converting macros to functions unhide type problems before changes will be integrated and trigger problems on other architectures. Signed-off-by: Kirill A. Shutemov Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar

mm: Add and use update_mmu_cache_pmd() in transparent huge page code.

2012-10-09T07:23:05Z

The transparent huge page code passes a PMD pointer in as the third argument of update_mmu_cache(), which expects a PTE pointer. This never got noticed because X86 implements update_mmu_cache() as a macro and thus we don't get any type checking, and X86 is the only architecture which supports transparent huge pages currently. Before other architectures can support transparent huge pages properly we need to add a new interface which will take a PMD pointer as the third argument rather than a PTE pointer. [akpm@linux-foundation.org: implement update_mm_cache_pmd() for s390] Signed-off-by: David S. Miller Cc: Andrea Arcangeli Cc: Johannes Weiner Cc: Gerald Schaefer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: remove pte_*map_nested()

2010-10-26T23:52:08Z

Since we no longer need to provide KM_type, the whole pte_*map_nested() API is now redundant, remove it. Signed-off-by: Peter Zijlstra Acked-by: Chris Metcalf Cc: David Howells Cc: Hugh Dickins Cc: Rik van Riel Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Steven Rostedt Cc: Russell King Cc: Ralf Baechle Cc: David Miller Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

x86-32, mm: Add an initial page table for core bootstrapping

2010-10-20T21:23:55Z

This patch adds an initial page table with low mappings used exclusively for booting APs/resuming after ACPI suspend/machine restart. After this, there's no need to add low mappings to swapper_pg_dir and zap them later or create own swsusp PGD page solely for ACPI sleep needs - we have initial_page_table for that. Signed-off-by: Borislav Petkov LKML-Reference: <20101020070526.GA9588@liondog.tnic> Signed-off-by: H. Peter Anvin