kernel.git/arch/x86/include/asm/cpu.h, branch linux-4.13.y

Merge tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2016-07-27T18:35:37Z

Pull xen updates from David Vrabel: "Features and fixes for 4.8-rc0: - ACPI support for guests on ARM platforms. - Generic steal time support for arm and x86. - Support cases where kernel cpu is not Xen VCPU number (e.g., if in-guest kexec is used). - Use the system workqueue instead of a custom workqueue in various places" * tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (47 commits) xen: add static initialization of steal_clock op to xen_time_ops xen/pvhvm: run xen_vcpu_setup() for the boot CPU xen/evtchn: use xen_vcpu_id mapping xen/events: fifo: use xen_vcpu_id mapping xen/events: use xen_vcpu_id mapping in events_base x86/xen: use xen_vcpu_id mapping when pointing vcpu_info to shared_info x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_op xen: introduce xen_vcpu_id mapping x86/acpi: store ACPI ids from MADT for future usage x86/xen: update cpuid.h from Xen-4.7 xen/evtchn: add IOCTL_EVTCHN_RESTRICT xen-blkback: really don't leak mode property xen-blkback: constify instance of "struct attribute_group" xen-blkfront: prefer xenbus_scanf() over xenbus_gather() xen-blkback: prefer xenbus_scanf() over xenbus_gather() xen: support runqueue steal time on xen arm/xen: add support for vm_assist hypercall xen: update xen headers xen-pciback: drop superfluous variables xen-pciback: short-circuit read path used for merging write values ...

x86/acpi: store ACPI ids from MADT for future usage

2016-07-25T12:30:53Z

Currently we don't save ACPI ids (unlike LAPIC ids which go to x86_cpu_to_apicid) from MADT and we may need this information later. Particularly, ACPI ids is the only existent way for a PVHVM Xen guest to figure out Xen's idea of its vCPUs ids before these CPUs boot and in some cases these ids diverge from Linux's cpu ids. Signed-off-by: Vitaly Kuznetsov Signed-off-by: David Vrabel

x86/smp: Remove stack_smp_processor_id()

2016-07-15T08:26:30Z

It serves no purpose -- raw_smp_processor_id() works fine. This change will be needed to move thread_info off the stack. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/a2bf4f07fbc30fb32f9f7f3f8f94ad3580823847.1468527351.git.luto@kernel.org Signed-off-by: Ingo Molnar

x86/cpu: Unify CPU family, model, stepping calculation

2015-11-24T08:15:54Z

Add generic functions which calc family, model and stepping from the CPUID_1.EAX leaf and stick them into the library we have. Rename those which do call CPUID with the prefix "x86_cpuid" as suggested by Paolo Bonzini. No functionality change. Signed-off-by: Borislav Petkov Reviewed-by: Paolo Bonzini Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1448273546-2567-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar

x86: Use common outgoing-CPU-notification code

2015-03-11T20:22:35Z

This commit removes the open-coded CPU-offline notification with new common code. Among other things, this change avoids calling scheduler code using RCU from an offline CPU that RCU is ignoring. It also allows Xen to notice at online time that the CPU did not go offline correctly. Note that Xen has the surviving CPU carry out some cleanup operations, so if the surviving CPU times out, these cleanup operations might have been carried out while the outgoing CPU was still running. It might therefore be unwise to bring this CPU back online, and this commit avoids doing so. Signed-off-by: Boris Ostrovsky Signed-off-by: Paul E. McKenney Cc: Cc: Konrad Rzeszutek Wilk Cc: David Vrabel Cc:

x86: delete __cpuinit usage from all x86 files

2013-07-14T23:36:56Z

The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: x86@kernel.org Acked-by: Ingo Molnar Acked-by: Thomas Gleixner Acked-by: H. Peter Anvin Signed-off-by: Paul Gortmaker

x86, topology: Debug CPU0 hotplug

2012-11-14T23:28:11Z

CONFIG_DEBUG_HOTPLUG_CPU0 is for debugging the CPU0 hotplug feature. The switch offlines CPU0 as soon as possible and boots userspace up with CPU0 offlined. User can online CPU0 back after boot time. The default value of the switch is off. To debug CPU0 hotplug, you need to enable CPU0 offline/online feature by either turning on CONFIG_BOOTPARAM_HOTPLUG_CPU0 during compilation or giving cpu0_hotplug kernel parameter at boot. It's safe and early place to take down CPU0 after all hotplug notifiers are installed and SMP is booted. Please note that some applications or drivers, e.g. some versions of udevd, during boot time may put CPU0 online again in this CPU0 hotplug debug mode. In this debug mode, setup_local_APIC() may report a warning on max_loops<=0 when CPU0 is onlined back after boot time. This is because pending interrupt in IRR can not move to ISR. The warning is not CPU0 specfic and it can happen on other CPUs as well. It is harmless except the first CPU0 online takes a bit longer time. And so this debug mode is useful to expose this issue. I'll send a seperate patch to fix this generic warning issue. Signed-off-by: Fenghua Yu Link: http://lkml.kernel.org/r/1352835171-3958-15-git-send-email-fenghua.yu@intel.com Signed-off-by: H. Peter Anvin

x86, hotplug: Wake up CPU0 via NMI instead of INIT, SIPI, SIPI

2012-11-14T23:28:03Z

Instead of waiting for STARTUP after INITs, BSP will execute the BIOS boot-strap code which is not a desired behavior for waking up BSP. To avoid the boot-strap code, wake up CPU0 by NMI instead. This works to wake up soft offlined CPU0 only. If CPU0 is hard offlined (i.e. physically hot removed and then hot added), NMI won't wake it up. We'll change this code in the future to wake up hard offlined CPU0 if real platform and request are available. AP is still waken up as before by INIT, SIPI, SIPI sequence. Signed-off-by: Fenghua Yu Link: http://lkml.kernel.org/r/1352896613-25957-1-git-send-email-fenghua.yu@intel.com Signed-off-by: H. Peter Anvin

x86: Fix mwait_usable section mismatch

2011-02-14T11:08:28Z

We use it in non __cpuinit code now too so drop marker. Signed-off-by: Borislav Petkov LKML-Reference: <20110211171754.GA21047@aftab> Signed-off-by: Ingo Molnar

x86, hotplug: Fix powersavings with offlined cores on AMD

2011-01-22T02:14:54Z

ea53069231f9317062910d6e772cca4ce93de8c8 made a CPU use monitor/mwait when offline. This is not the optimal choice for AMD wrt to powersavings and we'd prefer our cores to halt (i.e. enter C1) instead. For this, the same selection whether to use monitor/mwait has to be used as when we select the idle routine for the machine. With this patch, offlining cores 1-5 on a X6 machine allows core0 to boost again. [ hpa: putting this in urgent since it is a (power) regression fix ] Reported-by: Andreas Herrmann Cc: stable@kernel.org # 37.x Cc: H. Peter Anvin Cc: Arjan van de Ven Cc: Len Brown Cc: Venkatesh Pallipadi Cc: Peter Zijlstra Signed-off-by: Borislav Petkov LKML-Reference: <1295534572-10730-1-git-send-email-bp@amd64.org> Signed-off-by: H. Peter Anvin