kernel.git/arch/x86/include/asm/compat.h, branch linux-4.17.y

signal: Unify and correct copy_siginfo_to_user32

2018-01-16T01:56:20Z

Among the existing architecture specific versions of copy_siginfo_to_user32 there are several different implementation problems. Some architectures fail to handle all of the cases in in the siginfo union. Some architectures perform a blind copy of the siginfo union when the si_code is negative. A blind copy suggests the data is expected to be in 32bit siginfo format, which means that receiving such a signal via signalfd won't work, or that the data is in 64bit siginfo and the code is copying nonsense to userspace. Create a single instance of copy_siginfo_to_user32 that all of the architectures can share, and teach it to handle all of the cases in the siginfo union correctly, with the assumption that siginfo is stored internally to the kernel is 64bit siginfo format. A special case is made for x86 x32 format. This is needed as presence of both x32 and ia32 on x86_64 results in two different 32bit signal formats. By allowing this small special case there winds up being exactly one code base that needs to be maintained between all of the architectures. Vastly increasing the testing base and the chances of finding bugs. As the x86 copy of copy_siginfo_to_user32 the call of the x86 signal_compat_build_tests were moved into sigaction_compat_abi, so that they will keep running. Signed-off-by: "Eric W. Biederman"

signal: unify compat_siginfo_t

2018-01-15T23:40:31Z

--EWB Added #ifdef CONFIG_X86_X32_ABI to arch/x86/kernel/signal_compat.c Changed #ifdef CONFIG_X86_X32 to #ifdef CONFIG_X86_X32_ABI in linux/compat.h CONFIG_X86_X32 is set when the user requests X32 support. CONFIG_X86_X32_ABI is set when the user requests X32 support and the tool-chain has X32 allowing X32 support to be built. Signed-off-by: Al Viro Signed-off-by: Eric W. Biederman

signal: Remove _sys_private and _overrun_incr from struct compat_siginfo

2018-01-12T20:34:46Z

We have never passed either field to or from userspace so just remove them. Signed-off-by: "Eric W. Biederman"

fcntl: don't cap l_start and l_end values for F_GETLK64 in compat syscall

2017-11-15T13:08:36Z

Currently, we're capping the values too low in the F_GETLK64 case. The fields in that structure are 64-bit values, so we shouldn't need to do any sort of fixup there. Make sure we check that assumption at build time in the future however by ensuring that the sizes we're copying will fit. With this, we no longer need COMPAT_LOFF_T_MAX either, so remove it. Fixes: 94073ad77fff2 (fs/locks: don't mess with the address limit in compat_fcntl64) Reported-by: Vitaly Lipatov Signed-off-by: Jeff Layton Reviewed-by: David Howells

Merge branch 'linus' into x86/asm, to pick up fixes and resolve conflicts

2017-11-07T09:53:06Z

Conflicts: arch/x86/kernel/cpu/Makefile Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/entry/64: Remove thread_struct::sp0

2017-11-02T10:04:48Z

On x86_64, we can easily calculate sp0 when needed instead of storing it in thread_struct. On x86_32, a similar cleanup would be possible, but it would require cleaning up the vm86 code first, and that can wait for a later cleanup series. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/719cd9c66c548c4350d98a90f050aee8b17f8919.1509609304.git.luto@kernel.org Signed-off-by: Ingo Molnar

take compat_sys_old_getrlimit() to native syscall

2017-05-27T19:38:06Z

... and sanitize the ifdefs in there Signed-off-by: Al Viro

x86/coredump: Always use user_regs_struct for compat_elf_gregset_t

2016-11-24T05:01:05Z

Commit: 90954e7b9407 ("x86/coredump: Use pr_reg size, rather that TIF_IA32 flag") changed the coredumping code to construct the elf coredump file according to register set size - and that's good: if binary crashes with 32-bit code selector, generate 32-bit ELF core, otherwise - 64-bit core. That was made for restoring 32-bit applications on x86_64: we want 32-bit application after restore to generate 32-bit ELF dump on crash. All was quite good and recently I started reworking 32-bit applications dumping part of CRIU: now it has two parasites (32 and 64) for seizing compat/native tasks, after rework it'll have one parasite, working in 64-bit mode, to which 32-bit prologue long-jumps during infection. And while it has worked for my work machine, in VM with !CONFIG_X86_X32_ABI during reworking I faced that segfault in 32-bit binary, that has long-jumped to 64-bit mode results in dereference of garbage: 32-victim[19266]: segfault at f775ef65 ip 00000000f775ef65 sp 00000000f776aa50 error 14 BUG: unable to handle kernel paging request at ffffffffffffffff IP: [] strlen+0x0/0x20 [...] Call Trace: [] elf_core_dump+0x11a9/0x1480 [] do_coredump+0xa6b/0xe60 [] get_signal+0x1a8/0x5c0 [] do_signal+0x23/0x660 [] exit_to_usermode_loop+0x34/0x65 [] prepare_exit_to_usermode+0x2f/0x40 [] retint_user+0x8/0x10 That's because we have 64-bit registers set (with according total size) and we're writing it to elf_thread_core_info which has smaller size on !CONFIG_X86_X32_ABI. That lead to overwriting ELF notes part. Tested on 32-, 64-bit ELF crashes and on 32-bit binaries that have jumped with 64-bit code selector - all is readable with gdb. Signed-off-by: Dmitry Safonov Cc: Andy Lutomirski Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-mm@kvack.org Fixes: 90954e7b9407 ("x86/coredump: Use pr_reg size, rather that TIF_IA32 flag") Signed-off-by: Ingo Molnar

x86/coredump: Use pr_reg size, rather that TIF_IA32 flag

2016-09-14T19:28:10Z

Killed PR_REG_SIZE and PR_REG_PTR macro as we can get regset size from regset view. I wish I could also kill PRSTATUS_SIZE nicely. Suggested-by: Oleg Nesterov Signed-off-by: Dmitry Safonov Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: gorcunov@openvz.org Cc: xemul@virtuozzo.com Link: http://lkml.kernel.org/r/20160905133308.28234-5-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner