kernel.git/arch/x86/Makefile, branch linux-5.18.y

x86/retbleed: Add fine grained Kconfig knobs

2022-07-23T10:56:56Z

commit f43b9876e857c739d407bc56df288b0ebe1a9164 upstream. Do fine-grained Kconfig for all the various retbleed parts. NOTE: if your compiler doesn't support return thunks this will silently 'upgrade' your mitigation to IBPB, you might not like this. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov [cascardo: there is no CONFIG_OBJTOOL] [cascardo: objtool calling and option parsing has changed] Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman

x86/retpoline: Use -mfunction-return

2022-07-23T10:56:43Z

commit 0b53c374b9eff2255a386f1f1cfb9a928e52a5ae upstream. Utilize -mfunction-return=thunk-extern when available to have the compiler replace RET instructions with direct JMPs to the symbol __x86_return_thunk. This does not affect assembler (.S) sources, only C sources. -mfunction-return=thunk-extern has been available since gcc 7.3 and clang 15. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Nick Desaulniers Reviewed-by: Josh Poimboeuf Tested-by: Nick Desaulniers Signed-off-by: Borislav Petkov Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman

x86: Remove toolchain check for X32 ABI capability

2022-03-15T09:32:48Z

Commit 0bf6276392e9 ("x32: Warn and disable rather than error if binutils too old") added a small test in arch/x86/Makefile because binutils 2.22 or newer is needed to properly support elf32-x86-64. This check is no longer necessary, as the minimum supported version of binutils is 2.23, which is enforced at configuration time with scripts/min-tool-version.sh. Remove this check and replace all uses of CONFIG_X86_X32 with CONFIG_X86_X32_ABI, as two symbols are no longer necessary. [nathan: Rebase, fix up a few places where CONFIG_X86_X32 was still used, and simplify commit message to satisfy -tip requirements] Signed-off-by: Masahiro Yamada Signed-off-by: Nathan Chancellor Signed-off-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/r/20220314194842.3452-2-nathan@kernel.org

x86/ibt: Base IBT bits

2022-03-15T09:32:33Z

Add Kconfig, Makefile and basic instruction support for x86 IBT. (Ab)use __DISABLE_EXPORTS to disable IBT since it's already employed to mark compressed and purgatory. Additionally mark realmode with it as well to avoid inserting ENDBR instructions there. While ENDBR is technically a NOP, inserting them was causing some grief due to code growth. There's also a problem with using __noendbr in code compiled without -fcf-protection=branch. Signed-off-by: Peter Zijlstra (Intel) Acked-by: Josh Poimboeuf Link: https://lore.kernel.org/r/20220308154317.519875203@infradead.org

x86: Add straight-line-speculation mitigation

2021-12-09T12:32:25Z

Make use of an upcoming GCC feature to mitigate straight-line-speculation for x86: https://gcc.gnu.org/g:53a643f8568067d7700a9f2facc8ba39974973d3 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102952 https://bugs.llvm.org/show_bug.cgi?id=52323 It's built tested on x86_64-allyesconfig using GCC-12 and GCC-11. Maintenance overhead of this should be fairly low due to objtool validation. Size overhead of all these additional int3 instructions comes to: text data bss dec hex filename 22267751 6933356 2011368 31212475 1dc43bb defconfig-build/vmlinux 22804126 6933356 1470696 31208178 1dc32f2 defconfig-build/vmlinux.sls Or roughly 2.4% additional text. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Link: https://lore.kernel.org/r/20211204134908.140103474@infradead.org

x86: Use -mindirect-branch-cs-prefix for RETPOLINE builds

2021-12-08T10:57:04Z

In order to further enable commit: bbe2df3f6b6d ("x86/alternative: Try inline spectre_v2=retpoline,amd") add the new GCC flag -mindirect-branch-cs-prefix: https://gcc.gnu.org/g:2196a681d7810ad8b227bf983f38ba716620545e https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102952 https://bugs.llvm.org/show_bug.cgi?id=52323 to RETPOLINE=y builds. This should allow fully inlining retpoline,amd for GCC builds. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Kees Cook Acked-by: Nick Desaulniers Link: https://lkml.kernel.org/r/20211119165630.276205624@infradead.org

x86: Move RETPOLINE*_CFLAGS to arch Makefile

2021-12-08T10:39:42Z

Currently, RETPOLINE*_CFLAGS are defined in the top-level Makefile but only x86 makes use of them. Move them there. If ever another architecture finds the need, it can be reconsidered. [ bp: Massage a bit. ] Suggested-by: Nick Desaulniers Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Kees Cook Reviewed-by: Nick Desaulniers Link: https://lkml.kernel.org/r/20211119165630.219152765@infradead.org

Merge tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2021-11-08T17:15:45Z

Pull Kbuild updates from Masahiro Yamada: - Remove the global -isystem compiler flag, which was made possible by the introduction of - Improve the Kconfig help to print the location in the top menu level - Fix "FORCE prerequisite is missing" build warning for sparc - Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate a zstd-compressed tarball - Prevent gen_init_cpio tool from generating a corrupted cpio when KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later - Misc cleanups * tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits) kbuild: use more subdir- for visiting subdirectories while cleaning sh: remove meaningless archclean line initramfs: Check timestamp to prevent broken cpio archive kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug gen_init_cpio: add static const qualifiers kbuild: Add make tarzst-pkg build option scripts: update the comments of kallsyms support sparc: Add missing "FORCE" target when using if_changed kconfig: refactor conf_touch_dep() kconfig: refactor conf_write_dep() kconfig: refactor conf_write_autoconf() kconfig: add conf_get_autoheader_name() kconfig: move sym_escape_string_value() to confdata.c kconfig: refactor listnewconfig code kconfig: refactor conf_write_symbol() kconfig: refactor conf_write_heading() kconfig: remove 'const' from the return type of sym_escape_string_value() kconfig: rename a variable in the lexer to a clearer name kconfig: narrow the scope of variables in the lexer kconfig: Create links to main menu items in search ...

x86/Makefile: Remove unneeded whitespaces before tabs

2021-10-28T18:19:13Z

Align the FDINITRD line to the FDARGS one with tabs. [ bp: Commit message. ] Signed-off-by: Elyes HAOUAS Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20211028121021.10384-1-ehaouas@noos.fr

kbuild: use more subdir- for visiting subdirectories while cleaning

2021-10-24T04:49:46Z

Documentation/kbuild/makefiles.rst suggests to use "archclean" for cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement. Since commit d92cc4d51643 ("kbuild: require all architectures to have arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for all architectures. This can take advantage of the parallel option (-j) for "make clean". I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep" target no longer exists. Signed-off-by: Masahiro Yamada Reviewed-by: Kees Cook Acked-by: Geert Uytterhoeven Acked-by: Michael Ellerman (powerpc)