kernel.git/arch/um/kernel, branch linux-5.13.y

um: Fix stack pointer alignment

2021-07-20T14:00:29Z

[ Upstream commit 558f9b2f94dbd2d5c5c8292aa13e081cc11ea7d9 ] GCC assumes that stack is aligned to 16-byte on call sites [1]. Since GCC 8, GCC began using 16-byte aligned SSE instructions to implement assignments to structs on stack. When CC_OPTIMIZE_FOR_PERFORMANCE is enabled, this affects os-Linux/sigio.c, write_sigio_thread: struct pollfds *fds, tmp; tmp = current_poll; Note that struct pollfds is exactly 16 bytes in size. GCC 8+ generates assembly similar to: movdqa (%rdi),%xmm0 movaps %xmm0,-0x50(%rbp) This is an issue, because movaps will #GP if -0x50(%rbp) is not aligned to 16 bytes [2], and how rbp gets assigned to is via glibc clone thread_start, then function prologue, going though execution trace similar to (showing only relevant instructions): sub $0x10,%rsi mov %rcx,0x8(%rsi) mov %rdi,(%rsi) syscall pop %rax pop %rdi callq *%rax push %rbp mov %rsp,%rbp The stack pointer always points to the topmost element on stack, rather then the space right above the topmost. On push, the pointer decrements first before writing to the memory pointed to by it. Therefore, there is no need to have the stack pointer pointer always point to valid memory unless the stack is poped; so the `- sizeof(void *)` in the code is unnecessary. On the other hand, glibc reserves the 16 bytes it needs on stack and pops itself, so by the call instruction the stack pointer is exactly the caller-supplied sp. It then push the 16 bytes of the return address and the saved stack pointer, so the base pointer will be 16-byte aligned if and only if the caller supplied sp is 16-byte aligned. Therefore, the caller must supply a 16-byte aligned pointer, which `stack + UM_KERN_PAGE_SIZE` already satisfies. On a side note, musl is unaffected by this issue because it forces 16 byte alignment via `and $-16,%rsi` in its clone wrapper. Similarly, glibc i386 is also unaffected because it has `andl $0xfffffff0, %ecx`. To reproduce this bug, enable CONFIG_UML_RTC and CC_OPTIMIZE_FOR_PERFORMANCE. uml_rtc will call add_sigio_fd which will then cause write_sigio_thread to either go into segfault loop or panic with "Segfault with no mm". Similarly, signal stacks will be aligned by the host kernel upon signal delivery. `- sizeof(void *)` to sigaltstack is unconventional and extraneous. On a related note, initialization of longjmp buffers do require `- sizeof(void *)`. This is to account for the return address that would have been pushed to the stack at the call site. The reason for uml to respect 16-byte alignment, rather than telling GCC to assume 8-byte alignment like the host kernel since commit d9b0cde91c60 ("x86-64, gcc: Use -mpreferred-stack-boundary=3 if supported"), is because uml links against libc. There is no reason to assume libc is also compiled with that flag and assumes 8-byte alignment rather than 16-byte. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=40838 [2] https://c9x.me/x86/html/file_module_x86_id_180.html Signed-off-by: YiFei Zhu Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Johannes Berg Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin

Merge tag 'for-linus-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml

2021-05-05T01:15:10Z

Pull UML updates from Richard Weinberger: - Disable CONFIG_GCOV when built with modules - Many fixes for W=1 related warnings - Code cleanup * tag 'for-linus-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Fix W=1 missing-include-dirs warnings um: elf.h: Fix W=1 warning for empty body in 'do' statement um: pgtable.h: Fix W=1 warning for empty body in 'do' statement um: Remove unused including um: Add 2 missing libs to fix various build errors um: Replace if (cond) BUG() with BUG_ON() um: Disable CONFIG_GCOV with MODULES um: Remove unneeded variable 'ret' um: Mark all kernel symbols as local um: Fix tag order in stub_32.h

mm: move mem_init_print_info() into mm_init()

2021-04-30T18:20:42Z

mem_init_print_info() is called in mem_init() on each architecture, and pass NULL argument, so using void argument and move it into mm_init(). Link: https://lkml.kernel.org/r/20210317015210.33641-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang Acked-by: Dave Hansen [x86] Reviewed-by: Christophe Leroy [powerpc] Acked-by: David Hildenbrand Tested-by: Anatoly Pugachev [sparc64] Acked-by: Russell King [arm] Acked-by: Mike Rapoport Cc: Catalin Marinas Cc: Richard Henderson Cc: Guo Ren Cc: Yoshinori Sato Cc: Huacai Chen Cc: Jonas Bonn Cc: Palmer Dabbelt Cc: Heiko Carstens Cc: "David S. Miller" Cc: "Peter Zijlstra" Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'printk-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

2021-04-28T01:09:44Z

Pull printk updates from Petr Mladek: - Stop synchronizing kernel log buffer readers by logbuf_lock. As a result, the access to the buffer is fully lockless now. Note that printk() itself still uses locks because it tries to flush the messages to the console immediately. Also the per-CPU temporary buffers are still there because they prevent infinite recursion and serialize backtraces from NMI. All this is going to change in the future. - kmsg_dump API rework and cleanup as a side effect of the logbuf_lock removal. - Make bstr_printf() aware that %pf and %pF formats could deference the given pointer. - Show also page flags by %pGp format. - Clarify the documentation for plain pointer printing. - Do not show no_hash_pointers warning multiple times. - Update Senozhatsky email address. - Some clean up. * tag 'printk-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (24 commits) lib/vsprintf.c: remove leftover 'f' and 'F' cases from bstr_printf() printk: clarify the documentation for plain pointer printing kernel/printk.c: Fixed mundane typos printk: rename vprintk_func to vprintk vsprintf: dump full information of page flags in pGp mm, slub: don't combine pr_err with INFO mm, slub: use pGp to print page flags MAINTAINERS: update Senozhatsky email address lib/vsprintf: do not show no_hash_pointers message multiple times printk: console: remove unnecessary safe buffer usage printk: kmsg_dump: remove _nolock() variants printk: remove logbuf_lock printk: introduce a kmsg_dump iterator printk: kmsg_dumper: remove @active field printk: add syslog_lock printk: use atomic64_t for devkmsg_user.seq printk: use seqcount_latch for clear_seq printk: introduce CONSOLE_LOG_MAX printk: consolidate kmsg_dump_get_buffer/syslog_print_all code printk: refactor kmsg_dump_get_buffer() ...

um: Replace if (cond) BUG() with BUG_ON()

2021-04-15T21:10:37Z

Fix the following coccinelle reports: ./arch/um/kernel/mem.c:77:3-6: WARNING: Use BUG_ON instead of if condition followed by BUG. Reported-by: Abaci Robot Signed-off-by: Yang Li Signed-off-by: Richard Weinberger

um: Disable CONFIG_GCOV with MODULES

2021-04-15T21:10:33Z

CONFIG_GCOV doesn't work with modules, and for various reasons it cannot work, see also https://lore.kernel.org/r/d36ea54d8c0a8dd706826ba844a6f27691f45d55.camel@sipsolutions.net Make CONFIG_GCOV depend on !MODULES to avoid anyone running into issues there. This also means we need not export the gcov symbols. Signed-off-by: Johannes Berg Signed-off-by: Richard Weinberger

um: Mark all kernel symbols as local

2021-04-15T21:10:29Z

Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf Signed-off-by: Johannes Berg Acked-By: Anton Ivanov Tested-By: Ritesh Raj Sarraf Signed-off-by: Richard Weinberger

printk: introduce a kmsg_dump iterator

2021-03-08T10:43:27Z

Rather than storing the iterator information in the registered kmsg_dumper structure, create a separate iterator structure. The kmsg_dump_iter structure can reside on the stack of the caller, thus allowing lockless use of the kmsg_dump functions. Update code that accesses the kernel logs using the kmsg_dumper structure to use the new kmsg_dump_iter structure. For kmsg_dumpers, this also means adding a call to kmsg_dump_rewind() to initialize the iterator. All this is in preparation for removal of @logbuf_lock. Signed-off-by: John Ogness Reviewed-by: Kees Cook # pstore Reviewed-by: Petr Mladek Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20210303101528.29901-13-john.ogness@linutronix.de

um: synchronize kmsg_dumper

2021-03-08T10:42:37Z

The kmsg_dumper can be called from any context and CPU, possibly from multiple CPUs simultaneously. Since a static buffer is used to retrieve the kernel logs, this buffer must be protected against simultaneous dumping. Skip dumping if another context is already dumping. Signed-off-by: John Ogness Reviewed-by: Petr Mladek Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20210303101528.29901-2-john.ogness@linutronix.de

arch: setup PF_IO_WORKER threads like PF_KTHREAD

2021-02-22T00:25:22Z

PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the sense that we don't assign ->set_child_tid with our own structure. Just ensure that every arch sets up the PF_IO_WORKER threads like kthreads in the arch implementation of copy_thread(). Signed-off-by: Jens Axboe