kernel.git/arch/sparc/kernel/traps_64.c, branch linux-5.13.y

sparc64: Fix opcode filtering in handling of no fault loads

2021-03-10T00:21:10Z

is_no_fault_exception() has two bugs which were discovered via random opcode testing with stress-ng. Both are caused by improper filtering of opcodes. The first bug can be triggered by a floating point store with a no-fault ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode C1A01040. The code first tests op3[5] (0x1000000), which denotes a floating point instruction, and then tests op3[2] (0x200000), which denotes a store instruction. But these bits are not mutually exclusive, and the above mentioned opcode has both bits set. The intent is to filter out stores, so the test for stores must be done first in order to have any effect. The second bug can be triggered by a floating point load with one of the invalid ASI values 0x8e or 0x8f, which pass this check in is_no_fault_exception(): if ((asi & 0xf2) == ASI_PNF) An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38", opcode CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal in handle_ldf_stq(), and is_no_fault_exception() must not allow these invalid asi values to make it that far. In both of these cases, handle_ldf_stq() reacts by calling sun4v_data_access_exception() or spitfire_data_access_exception(), which call is_no_fault_exception() and results in an infinite recursion. Signed-off-by: Rob Gardner Tested-by: Anatoly Pugachev Signed-off-by: David S. Miller

mm: don't include asm/pgtable.h if linux/mm.h is already included

2020-06-09T16:39:13Z

Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include in the files that include . The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include ") ; do sed -i -e '/include / d' $f done Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Mike Rapoport Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds

kernel: rename show_stack_loglvl() => show_stack()

2020-06-09T16:39:13Z

Now the last users of show_stack() got converted to use an explicit log level, show_stack_loglvl() can drop it's redundant suffix and become once again well known show_stack(). Signed-off-by: Dmitry Safonov Signed-off-by: Andrew Morton Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com Signed-off-by: Linus Torvalds

sparc: add show_stack_loglvl()

2020-06-09T16:39:12Z

Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u Signed-off-by: Dmitry Safonov Signed-off-by: Andrew Morton Acked-by: David S. Miller Link: http://lkml.kernel.org/r/20200418201944.482088-35-dima@arista.com Signed-off-by: Linus Torvalds

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2019-07-09T04:48:15Z

Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...

signal: Remove the task parameter from force_sig_fault

2019-05-29T14:31:43Z

As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]$[^,]+$[,]$[^,]+$[,]$[^,]+$[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman"

signal: Remove task parameter from force_sig

2019-05-27T14:36:28Z

All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman"

treewide: Add SPDX license identifier for missed files

2019-05-21T08:50:45Z

Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

sparc64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack

2018-12-22T13:21:02Z

The structure of the ret_stack array on the task struct is going to change, and accessing it directly via the curr_ret_stack index will no longer give the ret_stack entry that holds the return address. To access that, architectures must now use ftrace_graph_get_ret_stack() to get the associated ret_stack that matches the saved return address. Cc: sparclinux@vger.kernel.org Acked-by: David S. Miller Signed-off-by: Steven Rostedt (VMware)

signal/sparc: Use force_sig_fault where appropriate

2018-04-25T15:44:10Z

Filling in struct siginfo before calling force_sig_info a tedious and error prone process, where once in a great while the wrong fields are filled out, and siginfo has been inconsistently cleared. Simplify this process by using the helper force_sig_fault. Which takes as a parameters all of the information it needs, ensures all of the fiddly bits of filling in struct siginfo are done properly and then calls force_sig_info. In short about a 5 line reduction in code for every time force_sig_info is called, which makes the calling function clearer. Cc: David Miller Cc: sparclinux@vger.kernel.org Signed-off-by: "Eric W. Biederman"