kernel.git/arch/sparc/kernel/ldc.c, branch linux-3.18.y

sparc64: ldc abort during vds iso boot

2018-04-13T17:52:20Z

[ Upstream commit 6c95483b768c62f8ee933ae08a1bdbcb78b5410f ] Orabug: 20902628 When an ldc control-only packet is received during data exchange in read_nonraw(), a new rx head is calculated but the rx queue head is not actually advanced (rx_set_head() is not called) and a branch is taken to 'no_data' at which point two things can happen depending on the value of the newly calculated rx head and the current rx tail: - If the rx queue is determined to be not empty, then the wrong packet is picked up. - If the rx queue is determined to be empty, then a read error (EAGAIN) is eventually returned since it is falsely assumed that more data was expected. The fix is to update the rx head and return in case of a control only packet during data exchange. Signed-off-by: Jagannathan Raman Reviewed-by: Aaron Young Reviewed-by: Alexandre Chartre Reviewed-by: Bijan Mottahedeh Reviewed-by: Liam Merwick Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

sparc: Use GFP_ATOMIC in ldc_alloc_exp_dring() as it can be called in softirq context

2015-07-05T14:12:57Z

[ Upstream commit 671d773297969bebb1732e1cdc1ec03aa53c6be2 ] Since it is possible for vnet_event_napi to end up doing vnet_control_pkt_engine -> ... -> vnet_send_attr -> vnet_port_alloc_tx_ring -> ldc_alloc_exp_dring -> kzalloc() (i.e., in softirq context), kzalloc() should be called with GFP_ATOMIC from ldc_alloc_exp_dring. Signed-off-by: Sowmini Varadhan Signed-off-by: Sasha Levin

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc

2014-10-12T00:36:34Z

Pull sparc updates from David Miller: 1) Move to 4-level page tables on sparc64 and support up to 53-bits of physical addressing. Kernel static image BSS size reduced by several megabytes. 2) M6/M7 cpu support, from Allan Pais. 3) Move to sparse IRQs, handle hypervisor TLB call errors more gracefully, and add T5 perf_event support. From Bob Picco. 4) Recognize cdroms and compute geometry from capacity in virtual disk driver, also from Allan Pais. 5) Fix memset() return value on sparc32, from Andreas Larsson. 6) Respect gfp flags in dma_alloc_coherent on sparc32, from Daniel Hellstrom. 7) Fix handling of compound pages in virtual disk driver, from Dwight Engen. 8) Fix lockdep warnings in LDC layer by moving IRQ requesting to ldc_alloc() from ldc_bind(). 9) Increase boot string length to 1024 bytes, from Dave Kleikamp. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: (31 commits) sparc64: Fix lockdep warnings on reboot on Ultra-5 sparc64: Increase size of boot string to 1024 bytes sparc64: Kill unnecessary tables and increase MAX_BANKS. sparc64: sparse irq sparc64: Adjust vmalloc region size based upon available virtual address bits. sparc64: Increase MAX_PHYS_ADDRESS_BITS to 53. sparc64: Use kernel page tables for vmemmap. sparc64: Fix physical memory management regressions with large max_phys_bits. sparc64: Adjust KTSB assembler to support larger physical addresses. sparc64: Define VA hole at run time, rather than at compile time. sparc64: Switch to 4-level page tables. sparc64: Fix reversed start/end in flush_tlb_kernel_range() sparc64: Add vio_set_intr() to enable/disable Rx interrupts vio: fix reuse of vio_dring slot sunvdc: limit each sg segment to a page sunvdc: compute vdisk geometry from capacity sunvdc: add cdrom and v1.1 protocol support sparc: VIO protocol version 1.6 sparc64: Fix hibernation code refrence to PAGE_OFFSET. sparc64: Move request_irq() from ldc_bind() to ldc_alloc() ...

sunvnet: allow admin to set sunvnet MTU

2014-09-30T21:10:39Z

This patch allows an admin to set the MTU on a sunvnet device to arbitrary values between the minimum (68) and maximum (65535) IPv4 packet sizes. Signed-off-by: David L Stevens Signed-off-by: David S. Miller

sparc64: Move request_irq() from ldc_bind() to ldc_alloc()

2014-09-17T01:31:31Z

The request_irq() needs to be done from ldc_alloc() to avoid the following (caught by lockdep) [00000000004a0738] __might_sleep+0xf8/0x120 [000000000058bea4] kmem_cache_alloc_trace+0x184/0x2c0 [00000000004faf80] request_threaded_irq+0x80/0x160 [000000000044f71c] ldc_bind+0x7c/0x220 [0000000000452454] vio_port_up+0x54/0xe0 [00000000101f6778] probe_disk+0x38/0x220 [sunvdc] [00000000101f6b8c] vdc_port_probe+0x22c/0x300 [sunvdc] [0000000000451a88] vio_device_probe+0x48/0x60 [000000000074c56c] really_probe+0x6c/0x300 [000000000074c83c] driver_probe_device+0x3c/0xa0 [000000000074c92c] __driver_attach+0x8c/0xa0 [000000000074a6ec] bus_for_each_dev+0x6c/0xa0 [000000000074c1dc] driver_attach+0x1c/0x40 [000000000074b0fc] bus_add_driver+0xbc/0x280 Signed-off-by: Sowmini Varadhan Acked-by: Dwight Engen Signed-off-by: David S. Miller

sparc64: ldc_connect() should not return EINVAL when handshake is in progress.

2014-08-05T03:18:17Z

The LDC handshake could have been asynchronously triggered after ldc_bind() enables the ldc_rx() receive interrupt-handler (and thus intercepts incoming control packets) and before vio_port_up() calls ldc_connect(). If that is the case, ldc_connect() should return 0 and let the state-machine progress. Signed-off-by: Sowmini Varadhan Acked-by: Karl Volz Signed-off-by: David S. Miller

sparc: remove deprecated IRQF_DISABLED

2013-10-03T00:02:35Z

This patch proposes to remove the IRQF_DISABLED flag from sparc architecture code. It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker Signed-off-by: David S. Miller

hlist: drop the node parameter from iterators

2013-02-28T03:10:24Z

I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin Acked-by: Paul E. McKenney Signed-off-by: Sasha Levin Cc: Wu Fengguang Cc: Marcelo Tosatti Cc: Gleb Natapov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

SPARC: drivers: remove __dev* attributes.

2013-01-03T23:57:04Z

CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton Cc: "David S. Miller" Signed-off-by: Greg Kroah-Hartman

sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op

2012-07-19T14:40:30Z

With the changes in the random tree, IRQF_SAMPLE_RANDOM is now a no-op; interrupt randomness is now collected unconditionally in a very low-overhead fashion; see commit 775f4b297b. The IRQF_SAMPLE_RANDOM flag was scheduled to be removed in 2009 on the feature-removal-schedule, so this patch is preparation for the final removal of this flag. Signed-off-by: "Theodore Ts'o" Acked-by: "David S. Miller"