kernel.git/arch/sh/mm, branch linux-5.3.y

mm/memory_hotplug: allow arch_remove_memory() without CONFIG_MEMORY_HOTREMOVE

2019-07-19T00:08:06Z

We want to improve error handling while adding memory by allowing to use arch_remove_memory() and __remove_pages() even if CONFIG_MEMORY_HOTREMOVE is not set to e.g., implement something like: arch_add_memory() rc = do_something(); if (rc) { arch_remove_memory(); } We won't get rid of CONFIG_MEMORY_HOTREMOVE for now, as it will require quite some dependencies for memory offlining. Link: http://lkml.kernel.org/r/20190527111152.16324-7-david@redhat.com Signed-off-by: David Hildenbrand Reviewed-by: Pavel Tatashin Cc: Tony Luck Cc: Fenghua Yu Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Heiko Carstens Cc: Yoshinori Sato Cc: Rich Felker Cc: Dave Hansen Cc: Andy Lutomirski Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Borislav Petkov Cc: "H. Peter Anvin" Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Cc: Michal Hocko Cc: David Hildenbrand Cc: Oscar Salvador Cc: "Kirill A. Shutemov" Cc: Alex Deucher Cc: "David S. Miller" Cc: Mark Brown Cc: Chris Wilson Cc: Christophe Leroy Cc: Nicholas Piggin Cc: Vasily Gorbik Cc: Rob Herring Cc: Masahiro Yamada Cc: "mike.travis@hpe.com" Cc: Andrew Banman Cc: Arun KS Cc: Qian Cai Cc: Mathieu Malaterre Cc: Baoquan He Cc: Logan Gunthorpe Cc: Anshuman Khandual Cc: Ard Biesheuvel Cc: Catalin Marinas Cc: Chintan Pandya Cc: Dan Williams Cc: Ingo Molnar Cc: Jonathan Cameron Cc: Joonsoo Kim Cc: Jun Yao Cc: Mark Rutland Cc: Mike Rapoport Cc: Oscar Salvador Cc: Robin Murphy Cc: Wei Yang Cc: Will Deacon Cc: Yu Zhao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm, kprobes: generalize and rename notify_page_fault() as kprobe_page_fault()

2019-07-17T02:23:22Z

Architectures which support kprobes have very similar boilerplate around calling kprobe_fault_handler(). Use a helper function in kprobes.h to unify them, based on the x86 code. This changes the behaviour for other architectures when preemption is enabled. Previously, they would have disabled preemption while calling the kprobe handler. However, preemption would be disabled if this fault was due to a kprobe, so we know the fault was not due to a kprobe handler and can simply return failure. This behaviour was introduced in commit a980c0ef9f6d ("x86/kprobes: Refactor kprobes_fault() like kprobe_exceptions_notify()") [anshuman.khandual@arm.com: export kprobe_fault_handler()] Link: http://lkml.kernel.org/r/1561133358-8876-1-git-send-email-anshuman.khandual@arm.com Link: http://lkml.kernel.org/r/1560420444-25737-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual Reviewed-by: Dave Hansen Cc: Michal Hocko Cc: Matthew Wilcox Cc: Mark Rutland Cc: Christophe Leroy Cc: Stephen Rothwell Cc: Andrey Konovalov Cc: Michael Ellerman Cc: Paul Mackerras Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Tony Luck Cc: Fenghua Yu Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Yoshinori Sato Cc: "David S. Miller" Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Andy Lutomirski Cc: Vineet Gupta Cc: James Hogan Cc: Paul Burton Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-07-12T19:24:03Z

Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...

sh: use the generic get_user_pages_fast code

2019-07-12T18:05:44Z

The sh code is mostly equivalent to the generic one, minus various bugfixes and two arch overrides that this patch adds to pgtable.h. Link: http://lkml.kernel.org/r/20190625143715.1689-7-hch@lst.de Signed-off-by: Christoph Hellwig Cc: Andrey Konovalov Cc: Benjamin Herrenschmidt Cc: David Miller Cc: James Hogan Cc: Jason Gunthorpe Cc: Khalid Aziz Cc: Michael Ellerman Cc: Nicholas Piggin Cc: Paul Burton Cc: Paul Mackerras Cc: Ralf Baechle Cc: Rich Felker Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2019-07-09T04:48:15Z

Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...

sh: no need to check return value of debugfs_create functions

2019-06-03T13:39:40Z

When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Yoshinori Sato Cc: Rich Felker Cc: Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211

2019-05-30T18:29:53Z

Based on 1 normalized pattern(s): released under the terms of the gnu gpl v2 0 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 9 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Steve Winslow Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171439.076212120@linutronix.de Signed-off-by: Greg Kroah-Hartman

signal: Remove the task parameter from force_sig_fault

2019-05-29T14:31:43Z

As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman"

signal/sh: Remove tsk parameter from force_sig_info_fault

2019-05-29T14:31:42Z

The force_sig_info_fault function is always called with tsk == current. Make that explicit by removing the tsk parameter. This also makes it clear that the sh force_sig_info_fault passes current into force_sig_fault. Signed-off-by: "Eric W. Biederman"

treewide: Add SPDX license identifier for missed files

2019-05-21T08:50:45Z

Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman