kernel.git/arch/sh/kernel/kprobes.c, branch linux-5.3.y

arch/sh: Check for kprobe trap number before trying to handle a kprobe trap

2019-06-26T10:11:13Z

The DIE_TRAP notifier chain is run both for kprobe traps and for BUG/WARN traps. The kprobe code assumes to be only called for BREAKPOINT_INSTRUCTION, and concludes to have hit a concurrently removed kprobe if it finds anything else at the faulting locations. This includes TRAPA_BUG_OPCODE used for BUG and WARN. The consequence is that kprobe_handler returns 1. This makes kprobe_exceptions_notify return NOTIFY_STOP, and prevents handling the BUG statement. This also prevents moving $pc away from the trap instruction, so the system locks up in an endless loop Signed-off-by: Michael Karcher Signed-off-by: Yoshinori Sato

sh: kernel: convert to SPDX identifiers

2018-12-28T20:11:45Z

Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/8736rccswn.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto Reviewed-by: Simon Horman Cc: Rich Felker Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

bpf/error-inject/kprobes: Clear current_kprobe and enable preempt in kprobe

2018-06-21T10:33:19Z

Clear current_kprobe and enable preemption in kprobe even if pre_handler returns !0. This simplifies function override using kprobes. Jprobe used to require to keep the preemption disabled and keep current_kprobe until it returned to original function entry. For this reason kprobe_int3_handler() and similar arch dependent kprobe handers checks pre_handler result and exit without enabling preemption if the result is !0. After removing the jprobe, Kprobes does not need to keep preempt disabled even if user handler returns !0 anymore. But since the function override handler in error-inject and bpf is also returns !0 if it overrides a function, to balancing the preempt count, it enables preemption and reset current kprobe by itself. That is a bad design that is very buggy. This fixes such unbalanced preempt-count and current_kprobes setting in kprobes, bpf and error-inject. Note: for powerpc and x86, this removes all preempt_disable from kprobe_ftrace_handler because ftrace callbacks are called under preempt disabled. Signed-off-by: Masami Hiramatsu Acked-by: Thomas Gleixner Acked-by: Naveen N. Rao Cc: Alexei Starovoitov Cc: Ananth N Mavinakayanahalli Cc: Andrew Morton Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: David S. Miller Cc: Fenghua Yu Cc: Heiko Carstens Cc: James Hogan Cc: Josef Bacik Cc: Linus Torvalds Cc: Martin Schwidefsky Cc: Michael Ellerman Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Ralf Baechle Cc: Rich Felker Cc: Russell King Cc: Steven Rostedt Cc: Tony Luck Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: https://lore.kernel.org/lkml/152942494574.15209.12323837825873032258.stgit@devbox Signed-off-by: Ingo Molnar

sh/kprobes: Don't call the ->break_handler() in SH kprobes code

2018-06-21T10:33:18Z

Don't call the ->break_handler() from the SH kprobes code, because it was only used by jprobes which got removed. Signed-off-by: Masami Hiramatsu Acked-by: Thomas Gleixner Cc: Ananth N Mavinakayanahalli Cc: Andrew Morton Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rich Felker Cc: Steven Rostedt Cc: Yoshinori Sato Cc: linux-arch@vger.kernel.org Cc: linux-sh@vger.kernel.org Link: https://lore.kernel.org/lkml/152942488763.15209.7791710414058030809.stgit@devbox Signed-off-by: Ingo Molnar

sh/kprobes: Remove jprobe implementation

2018-06-21T10:33:11Z

Remove arch dependent setjump/longjump functions and unused fields in kprobe_ctlblk for jprobes from arch/sh. Signed-off-by: Masami Hiramatsu Acked-by: Thomas Gleixner Cc: Ananth N Mavinakayanahalli Cc: Andrew Morton Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rich Felker Cc: Steven Rostedt Cc: Yoshinori Sato Cc: linux-arch@vger.kernel.org Cc: linux-sh@vger.kernel.org Link: https://lore.kernel.org/lkml/152942456877.15209.5482537226935729621.stgit@devbox Signed-off-by: Ingo Molnar

sh: migrate exception table users off module.h and onto extable.h

2017-01-24T17:41:47Z

These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. One uses "print_modules" so that prevents us removing module.h in that case, however. We also delete a duplicate prototype that doesn't need to exist, as it duplicates content in extable.h Cc: Yoshinori Sato Cc: Rich Felker Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Gortmaker

Replace with globally

2016-12-24T19:46:01Z

This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro Signed-off-by: Linus Torvalds

sh: Replace __get_cpu_var uses

2014-06-04T23:53:52Z

__get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Signed-off-by: Christoph Lameter Tested-by: Geert Uytterhoeven [compilation only] Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

hlist: drop the node parameter from iterators

2013-02-28T03:10:24Z

I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin Acked-by: Paul E. McKenney Signed-off-by: Sasha Levin Cc: Wu Fengguang Cc: Marcelo Tosatti Cc: Gleb Natapov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

sh: kprobes SMP support.

2010-06-14T08:06:10Z

Presently kprobes support relies on several saved opcode variables for saving and restoring state, without any specific locking. This is inherently racy on SMP, and given that we already use per-CPU variables for everything else, convert these over too. Signed-off-by: Paul Mundt