kernel.git/arch/sh/kernel/cpu/sh4a, branch linux-2.6.25.y

serial: Move asm-sh/sci.h to linux/serial_sci.h.

2008-02-26T05:52:45Z

This header is needed on other architectures as well (namely h8300), which currently fails to build without this in place. Rather than duplicating the port definition completely there, just move this to a common location instead. This should get h8300 working again for 2.6.25, in addition to the changes already pushed by Sato-san in -rc2. Signed-off-by: Paul Mundt

sh: add support for sh7366 processor

2008-02-14T05:22:10Z

This patch adds sh7366 cpu supports. Just the most basic things like interrupt controller, clocks and serial port are included at this point. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt

sh: intc - remove default interrupt priority tables

2008-01-28T04:19:02Z

This patch removes interrupt priority tables from the intc code. Optimal priority assignment varies with embedded application anyway, so keeping the interrupt priority tables together with cpu-specific code doesn't make sense. The function intc_set_priority() should be used instead to set the desired interrupt priority level. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt

sh: Add support for SH7763 CPU subtype.

2008-01-28T04:19:02Z

Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt

sh: Add resource of USBF for SH7722.

2007-10-30T04:05:31Z

Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt

sh: Fix URAM start address on SH7785.

2007-09-27T09:22:21Z

Not all of the SH-X2 URAM blocks are mapped in the same place, SH7785 happens to map it on the opposite end of the address space from SH7722, correct the addresses. Signed-off-by: Paul Mundt

sh: Fix plat_irq_setup_pins() for SH7785.

2007-09-27T07:45:46Z

There was some debug code left in here that caused the pin changes to never be hit. Kill that off, and all is well. Signed-off-by: Paul Mundt

sh: Initial SH-X3 SMP support.

2007-09-21T10:16:05Z

This adds basic support for SH-X3 SMP (4 CPUs). More IPI and cache debugging is necessary, mostly interfacing the d-cache coherency and the I-cache broadcast invalidates. Only for testing at present! Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt

sh: Hook up the SH-X3 SMP intc register groups.

2007-09-21T09:34:48Z

Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt

sh: Wire up URAM node on SH7785.

2007-09-21T02:57:55Z

Add SH7785 URAM as node 1, follows the SH-X3 change. Signed-off-by: Paul Mundt