kernel.git/arch/s390/net, branch linux-6.10.y

s390/bpf: Emit a barrier for BPF_FETCH instructions

2024-05-12T23:55:57Z

BPF_ATOMIC_OP() macro documentation states that "BPF_ADD | BPF_FETCH" should be the same as atomic_fetch_add(), which is currently not the case on s390x: the serialization instruction "bcr 14,0" is missing. This applies to "and", "or" and "xor" variants too. s390x is allowed to reorder stores with subsequent fetches from different addresses, so code relying on BPF_FETCH acting as a barrier, for example: stw [%r0], 1 afadd [%r1], %r2 ldxw %r3, [%r4] may be broken. Fix it by emitting "bcr 14,0". Note that a separate serialization instruction is not needed for BPF_XCHG and BPF_CMPXCHG, because COMPARE AND SWAP performs serialization itself. Fixes: ba3b86b9cef0 ("s390/bpf: Implement new atomic ops") Reported-by: Puranjay Mohan Closes: https://lore.kernel.org/bpf/mb61p34qvq3wf.fsf@kernel.org/ Signed-off-by: Ilya Leoshkevich Reviewed-by: Puranjay Mohan Link: https://lore.kernel.org/r/20240507000557.12048-1-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-03-29T00:25:57Z

Cross-merge networking fixes after downstream PR. No conflicts, or adjacent changes. Signed-off-by: Jakub Kicinski

s390/bpf: Fix bpf_plt pointer arithmetic

2024-03-20T05:52:43Z

Kui-Feng Lee reported a crash on s390x triggered by the dummy_st_ops/dummy_init_ptr_arg test [1]: [<0000000000000002>] 0x2 [<00000000009d5cde>] bpf_struct_ops_test_run+0x156/0x250 [<000000000033145a>] __sys_bpf+0xa1a/0xd00 [<00000000003319dc>] __s390x_sys_bpf+0x44/0x50 [<0000000000c4382c>] __do_syscall+0x244/0x300 [<0000000000c59a40>] system_call+0x70/0x98 This is caused by GCC moving memcpy() after assignments in bpf_jit_plt(), resulting in NULL pointers being written instead of the return and the target addresses. Looking at the GCC internals, the reordering is allowed because the alias analysis thinks that the memcpy() destination and the assignments' left-hand-sides are based on different objects: new_plt and bpf_plt_ret/bpf_plt_target respectively, and therefore they cannot alias. This is in turn due to a violation of the C standard: When two pointers are subtracted, both shall point to elements of the same array object, or one past the last element of the array object ... From the C's perspective, bpf_plt_ret and bpf_plt are distinct objects and cannot be subtracted. In the practical terms, doing so confuses the GCC's alias analysis. The code was written this way in order to let the C side know a few offsets defined in the assembly. While nice, this is by no means necessary. Fix the noncompliance by hardcoding these offsets. [1] https://lore.kernel.org/bpf/c9923c1d-971d-4022-8dc8-1364e929d34c@gmail.com/ Fixes: f1d5df84cd8c ("s390/bpf: Implement bpf_arch_text_poke()") Signed-off-by: Ilya Leoshkevich Message-ID: <20240320015515.11883-1-iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov

bpf: Take return from set_memory_rox() into account with bpf_jit_binary_lock_ro()

2024-03-15T02:28:52Z

set_memory_rox() can fail, leaving memory unprotected. Check return and bail out when bpf_jit_binary_lock_ro() returns an error. Link: https://github.com/KSPP/linux/issues/7 Signed-off-by: Christophe Leroy Cc: linux-hardening@vger.kernel.org Reviewed-by: Kees Cook Reviewed-by: Puranjay Mohan Reviewed-by: Ilya Leoshkevich # s390x Acked-by: Tiezhu Yang # LoongArch Reviewed-by: Johan Almbladh # MIPS Part Message-ID: <036b6393f23a2032ce75a1c92220b2afcb798d5d.1709850515.git.christophe.leroy@csgroup.eu> Signed-off-by: Alexei Starovoitov

s390/bpf: Fix gotol with large offsets

2024-01-04T19:35:40Z

The gotol implementation uses a wrong data type for the offset: it should be s32, not s16. Fixes: c690191e23d8 ("s390/bpf: Implement unconditional jump with 32-bit offset") Signed-off-by: Ilya Leoshkevich Acked-by: Yonghong Song Acked-by: John Fastabend Link: https://lore.kernel.org/r/20240102193531.3169422-2-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov

s390/bpf: Fix indirect trampoline generation

2023-12-18T11:00:37Z

The func_addr used to be NULL for indirect trampolines used by struct_ops. Now func_addr is a valid function pointer. Hence use BPF_TRAMP_F_INDIRECT flag to detect such condition. Fixes: 2cd3e3772e41 ("x86/cfi,bpf: Fix bpf_struct_ops CFI") Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Reviewed-by: Ilya Leoshkevich Link: https://lore.kernel.org/bpf/20231216004549.78355-1-alexei.starovoitov@gmail.com

bpf: Add arch_bpf_trampoline_size()

2023-12-07T01:17:20Z

This helper will be used to calculate the size of the trampoline before allocating the memory. arch_prepare_bpf_trampoline() for arm64 and riscv64 can use arch_bpf_trampoline_size() to check the trampoline fits in the image. OTOH, arch_prepare_bpf_trampoline() for s390 has to call the JIT process twice, so it cannot use arch_bpf_trampoline_size(). Signed-off-by: Song Liu Acked-by: Ilya Leoshkevich Tested-by: Ilya Leoshkevich # on s390x Acked-by: Jiri Olsa Acked-by: Björn Töpel Tested-by: Björn Töpel # on riscv Link: https://lore.kernel.org/r/20231206224054.492250-6-song@kernel.org Signed-off-by: Alexei Starovoitov

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2023-10-17T04:05:33Z

Daniel Borkmann says: ==================== pull-request: bpf-next 2023-10-16 We've added 90 non-merge commits during the last 25 day(s) which contain a total of 120 files changed, 3519 insertions(+), 895 deletions(-). The main changes are: 1) Add missed stats for kprobes to retrieve the number of missed kprobe executions and subsequent executions of BPF programs, from Jiri Olsa. 2) Add cgroup BPF sockaddr hooks for unix sockets. The use case is for systemd to reimplement the LogNamespace feature which allows running multiple instances of systemd-journald to process the logs of different services, from Daan De Meyer. 3) Implement BPF CPUv4 support for s390x BPF JIT, from Ilya Leoshkevich. 4) Improve BPF verifier log output for scalar registers to better disambiguate their internal state wrt defaults vs min/max values matching, from Andrii Nakryiko. 5) Extend the BPF fib lookup helpers for IPv4/IPv6 to support retrieving the source IP address with a new BPF_FIB_LOOKUP_SRC flag, from Martynas Pumputis. 6) Add support for open-coded task_vma iterator to help with symbolization for BPF-collected user stacks, from Dave Marchevsky. 7) Add libbpf getters for accessing individual BPF ring buffers which is useful for polling them individually, for example, from Martin Kelly. 8) Extend AF_XDP selftests to validate the SHARED_UMEM feature, from Tushar Vyavahare. 9) Improve BPF selftests cross-building support for riscv arch, from Björn Töpel. 10) Add the ability to pin a BPF timer to the same calling CPU, from David Vernet. 11) Fix libbpf's bpf_tracing.h macros for riscv to use the generic implementation of PT_REGS_SYSCALL_REGS() to access syscall arguments, from Alexandre Ghiti. 12) Extend libbpf to support symbol versioning for uprobes, from Hengqi Chen. 13) Fix bpftool's skeleton code generation to guarantee that ELF data is 8 byte aligned, from Ian Rogers. 14) Inherit system-wide cpu_mitigations_off() setting for Spectre v1/v4 security mitigations in BPF verifier, from Yafang Shao. 15) Annotate struct bpf_stack_map with __counted_by attribute to prepare BPF side for upcoming __counted_by compiler support, from Kees Cook. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (90 commits) bpf: Ensure proper register state printing for cond jumps bpf: Disambiguate SCALAR register state output in verifier logs selftests/bpf: Make align selftests more robust selftests/bpf: Improve missed_kprobe_recursion test robustness selftests/bpf: Improve percpu_alloc test robustness selftests/bpf: Add tests for open-coded task_vma iter bpf: Introduce task_vma open-coded iterator kfuncs selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c bpf: Don't explicitly emit BTF for struct btf_iter_num bpf: Change syscall_nr type to int in struct syscall_tp_t net/bpf: Avoid unused "sin_addr_len" warning when CONFIG_CGROUP_BPF is not set bpf: Avoid unnecessary audit log for CPU security mitigations selftests/bpf: Add tests for cgroup unix socket address hooks selftests/bpf: Make sure mount directory exists documentation/bpf: Document cgroup unix socket address hooks bpftool: Add support for cgroup unix socket address hooks libbpf: Add support for cgroup unix socket address hooks bpf: Implement cgroup sockaddr hooks for unix sockets bpf: Add bpf_sock_addr_set_sun_path() to allow writing unix sockaddr from bpf bpf: Propagate modified uaddrlen from cgroup sockaddr programs ... ==================== Link: https://lore.kernel.org/r/20231016204803.30153-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-10-13T00:07:34Z

Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: kernel/bpf/verifier.c 829955981c55 ("bpf: Fix verifier log for async callback return values") a923819fb2c5 ("bpf: Treat first argument as return value for bpf_throw") Signed-off-by: Jakub Kicinski

s390/bpf: Fix unwinding past the trampoline

2023-10-10T22:08:46Z

When functions called by the trampoline panic, the backtrace that is printed stops at the trampoline, because the trampoline does not store its caller's frame address (backchain) on stack; it also stores the return address at a wrong location. Store both the same way as is already done for the regular eBPF programs. Fixes: 528eb2cb87bc ("s390/bpf: Implement arch_prepare_bpf_trampoline()") Signed-off-by: Ilya Leoshkevich Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20231010203512.385819-3-iii@linux.ibm.com