kernel.git/arch/s390/net, branch linux-4.10.y

bpf: xdp: Allow head adjustment in XDP prog

2016-12-08T19:25:13Z

This patch allows XDP prog to extend/remove the packet data at the head (like adding or removing header). It is done by adding a new XDP helper bpf_xdp_adjust_head(). It also renames bpf_helper_changes_skb_data() to bpf_helper_changes_pkt_data() to better reflect that XDP prog does not work on skb. This patch adds one "xdp_adjust_head" bit to bpf_prog for the XDP-capable driver to check if the XDP prog requires bpf_xdp_adjust_head() support. The driver can then decide to error out during XDP_SETUP_PROG. Signed-off-by: Martin KaFai Lau Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Acked-by: John Fastabend Signed-off-by: David S. Miller

s390/bpf: fix recache skb->data/hlen for skb_vlan_push/pop

2016-05-19T07:14:27Z

In case of usage of skb_vlan_push/pop, in the prologue we store the SKB pointer on the stack and restore it after BPF_JMP_CALL to skb_vlan_push/pop. Unfortunately currently there are two bugs in the code: 1) The wrong stack slot (offset 170 instead of 176) is used 2) The wrong register (W1 instead of B1) is saved So fix this and use correct stack slot and register. Fixes: 9db7f2b81880 ("s390/bpf: recache skb->data/hlen for skb_vlan_push/pop") Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky

s390/bpf: reduce maximum program size to 64 KB

2016-05-19T07:14:27Z

The s390 BFP compiler currently uses relative branch instructions that only support jumps up to 64 KB. Examples are "j", "jnz", "cgrj", etc. Currently the maximum size of s390 BPF programs is set to 0x7ffff. If branches over 64 KB are generated the, kernel can crash due to incorrect code. So fix this an reduce the maximum size to 64 KB. Programs larger than that will be interpreted. Fixes: ce2b6ad9c185 ("s390/bpf: increase BPF_SIZE_MAX") Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky

bpf, s390: add support for constant blinding

2016-05-16T17:49:33Z

This patch adds recently added constant blinding helpers into the s390 eBPF JIT. In the bpf_int_jit_compile() path, requirements are to utilize bpf_jit_blind_constants()/bpf_jit_prog_release_other() pair for rewriting the program into a blinded one, and to map the BPF_REG_AX register to a CPU register. The mapping of BPF_REG_AX is at r12 and similarly like in x86 case performs reloading when ld_abs/ind is used. When blinding is not used, there's no additional overhead in the generated image. When BPF_REG_AX is used, we don't need to emit skb->data reload when helper function changed skb->data, as this will be reloaded later on anyway from stack on ld_abs/ind, where skb->data is needed. s390 allows for this w/o much additional complexity unlike f.e. x86. Signed-off-by: Daniel Borkmann Signed-off-by: Michael Holzheu Signed-off-by: David S. Miller

bpf: prepare bpf_int_jit_compile/bpf_prog_select_runtime apis

2016-05-16T17:49:32Z

Since the blinding is strictly only called from inside eBPF JITs, we need to change signatures for bpf_int_jit_compile() and bpf_prog_select_runtime() first in order to prepare that the eBPF program we're dealing with can change underneath. Hence, for call sites, we need to return the latest prog. No functional change in this patch. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller

bpf: move clearing of A/X into classic to eBPF migration prologue

2015-12-18T21:04:51Z

Back in the days where eBPF (or back then "internal BPF" ;->) was not exposed to user space, and only the classic BPF programs internally translated into eBPF programs, we missed the fact that for classic BPF A and X needed to be cleared. It was fixed back then via 83d5b7ef99c9 ("net: filter: initialize A and X registers"), and thus classic BPF specifics were added to the eBPF interpreter core to work around it. This added some confusion for JIT developers later on that take the eBPF interpreter code as an example for deriving their JIT. F.e. in f75298f5c3fe ("s390/bpf: clear correct BPF accumulator register"), at least X could leak stack memory. Furthermore, since this is only needed for classic BPF translations and not for eBPF (verifier takes care that read access to regs cannot be done uninitialized), more complexity is added to JITs as they need to determine whether they deal with migrations or native eBPF where they can just omit clearing A/X in their prologue and thus reduce image size a bit, see f.e. cde66c2d88da ("s390/bpf: Only clear A and X for converted BPF programs"). In other cases (x86, arm64), A and X is being cleared in the prologue also for eBPF case, which is unnecessary. Lets move this into the BPF migration in bpf_convert_filter() where it actually belongs as long as the number of eBPF JITs are still few. It can thus be done generically; allowing us to remove the quirk from __bpf_prog_run() and to slightly reduce JIT image size in case of eBPF, while reducing code duplication on this matter in current(/future) eBPF JITs. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Reviewed-by: Michael Holzheu Tested-by: Michael Holzheu Cc: Zi Shen Lim Cc: Yang Shi Acked-by: Yang Shi Acked-by: Zi Shen Lim Signed-off-by: David S. Miller

ebpf: migrate bpf_prog's flags to bitfield

2015-10-03T12:02:39Z

As we need to add further flags to the bpf_prog structure, lets migrate both bools to a bitfield representation. The size of the base structure (excluding insns) remains unchanged at 40 bytes. Add also tags for the kmemchecker, so that it doesn't throw false positives. Even in case gcc would generate suboptimal code, it's not being accessed in performance critical paths. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller

bpf: s390: Fix build error caused by the struct bpf_array member name changed

2015-08-11T18:49:40Z

There is a build error that "'struct bpf_array' has no member named 'prog'" on s390. In commit 2a36f0b92eb6 ("bpf: Make the bpf_prog_array_map more generic"), the member 'prog' of struct bpf_array is replaced by 'ptrs'. So this patch fixes it. Fixes: 2a36f0b92eb6 ("bpf: Make the bpf_prog_array_map more generic") Reported-by: Wu Fengguang Signed-off-by: Kaixu Xia Signed-off-by: David S. Miller

bpf: provide helper that indicates eBPF was migrated

2015-07-30T18:13:20Z

During recent discussions we had with Michael, we found that it would be useful to have an indicator that tells the JIT that an eBPF program had been migrated from classic instructions into eBPF instructions, as only in that case A and X need to be cleared in the prologue. Such eBPF programs do not set a particular type, but all have BPF_PROG_TYPE_UNSPEC. Thus, introduce a small helper for cde66c2d88da ("s390/bpf: Only clear A and X for converted BPF programs") and possibly others in future. Signed-off-by: Daniel Borkmann Cc: Michael Holzheu Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller

s390/bpf: recache skb->data/hlen for skb_vlan_push/pop

2015-07-29T21:59:58Z

Allow eBPF programs attached to TC qdiscs call skb_vlan_push/pop via helper functions. These functions may change skb->data/hlen. This data is cached by s390 JIT to improve performance of ld_abs/ld_ind instructions. Therefore after a change we have to reload the data. In case of usage of skb_vlan_push/pop, in the prologue we store the SKB pointer on the stack and restore it after BPF_JMP_CALL to skb_vlan_push/pop. Signed-off-by: Michael Holzheu Signed-off-by: David S. Miller