kernel.git/arch/s390/kernel/vdso64, branch linux-4.14.y

s390/kasan: avoid vdso instrumentation

2019-11-24T07:23:23Z

[ Upstream commit 348498458505e202df41b6b9a78da448d39298b7 ] vdso is mapped into user space processes, which won't have kasan shodow mapped. Reviewed-by: Martin Schwidefsky Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin

s390/vdso: add missing FORCE to build targets

2018-11-27T15:10:47Z

[ Upstream commit b44b136a3773d8a9c7853f8df716bd1483613cbb ] According to Documentation/kbuild/makefiles.txt all build targets using if_changed should use FORCE as well. Add missing FORCE to make sure vdso targets are rebuild properly when not just immediate prerequisites have changed but also when build command differs. Reviewed-by: Philipp Rudo Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

s390/mm: use new mm defines instead of magic values

2017-07-26T06:25:09Z

Reviewed-by: Martin Schwidefsky Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/time: steer clocksource on STP sync events

2016-10-28T08:09:02Z

On STP sync events the TOD clock will jump in time, either forward or backward. The TOD clocksource claims to be continuous but in case of an STP sync with a negative offset it is not. Subtract the offset injected by the STP sync check from the result of the TOD clocksource to make it continuous again. Add code to drift the offset towards zero with a fixed rate, steering 1 second in ~9 hours. Suggested-by: David Hildenbrand Signed-off-by: Martin Schwidefsky

s390: enable UBSAN

2016-09-20T12:26:23Z

This enables UBSAN for s390. We have to disable the null sanitizer as s390 code does access memory via a null pointer (the prefix page). Signed-off-by: Christian Borntraeger Acked-by: Andrey Ryabinin Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390: enable kcov support

2016-06-28T07:32:39Z

Now that hopefully all inline assemblies have been converted to single basic blocks we can enable kcov on s390. Note that this patch does not disable as many files on s390 like the x86 variant does. Right now I didn't see a reason to do that, however additional files or directories can be excluded at any time. The runtime overhead seems to be quite high. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/vdso: optimize getcpu system call

2016-01-11T12:01:24Z

Add the CPU number to the per-cpu vdso data page and add the __kernel_getcpu function to the vdso object to retrieve the CPU number in user space. Suggested-by: Heiko Carstens Reviewed-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/vdso: emit a GNU hash

2015-08-07T07:57:39Z

As proposed by Andy Lutomirski create the SysV and the GNU hash for the vdso objects. This may make some dynamic loaders a bit faster. Signed-off-by: Martin Schwidefsky

s390/vdso: fix clock_gettime for CLOCK_THREAD_CPUTIME_ID, -2 and -3

2015-02-12T08:37:21Z

Git commit 8d8f2e18a6dbd3d09dd918788422e6ac8c878e96 "s390/vdso: ectg gettime support for CLOCK_THREAD_CPUTIME_ID" broke clock_gettime for CLOCK_THREAD_CPUTIME_ID. Git commit c742b31c03f37c5c499178f09f57381aa6c70131 "fast vdso implementation for CLOCK_THREAD_CPUTIME_ID" introduced the ECTG for clock id -2. Correct would have been clock id -3. Fix the whole mess, CLOCK_THREAD_CPUTIME_ID is based on CPUCLOCK_SCHED and can not be speed up by the vdso. A speedup is only available for clock id -3 which is CPUCLOCK_VIRT for the task currently running on the CPU. Signed-off-by: Martin Schwidefsky