kernel.git/arch/s390/kernel/nmi.c, branch linux-6.0.y

s390/boot: fix absolute zero lowcore corruption on boot

2022-09-07T12:04:01Z

Crash dump always starts on CPU0. In case CPU0 is offline the prefix page is not installed and the absolute zero lowcore is used. However, struct lowcore::mcesad is never assigned and stays zero. That leads to __machine_kdump() -> save_vx_regs() call silently stores vector registers to the absolute lowcore at 0x11b0 offset. Fixes: a62bc0739253 ("s390/kdump: add support for vector extension") Reviewed-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Vasily Gorbik

s390/nmi: use irqentry_nmi_enter()/irqentry_nmi_exit()

2022-07-28T16:05:24Z

With generic entry in place switch the nmi handler to use the generic entry helper functions. Signed-off-by: Sven Schnelle Reviewed-by: Heiko Carstens Signed-off-by: Alexander Gordeev

s390/pai: add support for cryptography counters

2022-05-09T09:50:01Z

PMU device driver perf_pai_crypto supports Processor Activity Instrumentation (PAI), available with IBM z16: - maps a full page to lowcore address 0x1500. - uses CR0 bit 13 to turn PAI crypto counting on and off. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_crypto/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_crypto/events directory. - one special counters can be specified using perf stat -e pai_crypto/CRYPTO_ALL/ which returns the sum of all incremented crypto counters. - one event pai_crypto/CRYPTO_ALL/ is reserved for sampling. No multiple invocations are possible. The event collects data at context switch out and saves them in the ring buffer. Add qpaci assembly instruction to query supported memory mapped crypto counters. It returns the number of counters (no holes allowed in that range). The PAI crypto counter events are system wide and can not be executed in parallel. Therefore some restrictions documented in function paicrypt_busy apply. In particular event CRYPTO_ALL for sampling must run exclusive. Only counting events can run in parallel. PAI crypto counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAI event to record PAI cryptography counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAI counters immediately. Co-developed-by: Sven Schnelle Signed-off-by: Sven Schnelle Reviewed-by: Juergen Christ Signed-off-by: Thomas Richter Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens

s390: remove invalid email address of Heiko Carstens

2022-02-06T22:31:29Z

Remove my old invalid email address which can be found in a couple of files. Instead of updating it, just remove my contact data completely from source files. We have git and other tools which allow to figure out who is responsible for what with recent contact data. Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/nmi: handle vector validity failures for KVM guests

2022-01-23T09:20:03Z

The machine check validity bit tells about the context. If a KVM guest was running the bit tells about the guest validity and the host state is not affected. As a guest can disable the guest validity this might result in unwanted host errors on machine checks. Cc: stable@vger.kernel.org Fixes: c929500d7a5a ("s390/nmi: s390: New low level handling for machine check happening in guest") Signed-off-by: Christian Borntraeger Reviewed-by: Heiko Carstens Signed-off-by: Heiko Carstens

s390/nmi: handle guarded storage validity failures for KVM guests

2022-01-23T09:20:02Z

machine check validity bits reflect the state of the machine check. If a guest does not make use of guarded storage, the validity bit might be off. We can not use the host CR bit to decide if the validity bit must be on. So ignore "invalid" guarded storage controls for KVM guests in the host and rely on the machine check being forwarded to the guest. If no other errors happen from a host perspective everything is fine and no process must be killed and the host can continue to run. Cc: stable@vger.kernel.org Fixes: c929500d7a5a ("s390/nmi: s390: New low level handling for machine check happening in guest") Reported-by: Carsten Otte Signed-off-by: Christian Borntraeger Tested-by: Carsten Otte Reviewed-by: Heiko Carstens Signed-off-by: Heiko Carstens

Merge branch 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2022-01-17T03:49:30Z

Pull signal/exit/ptrace updates from Eric Biederman: "This set of changes deletes some dead code, makes a lot of cleanups which hopefully make the code easier to follow, and fixes bugs found along the way. The end-game which I have not yet reached yet is for fatal signals that generate coredumps to be short-circuit deliverable from complete_signal, for force_siginfo_to_task not to require changing userspace configured signal delivery state, and for the ptrace stops to always happen in locations where we can guarantee on all architectures that the all of the registers are saved and available on the stack. Removal of profile_task_ext, profile_munmap, and profile_handoff_task are the big successes for dead code removal this round. A bunch of small bug fixes are included, as most of the issues reported were small enough that they would not affect bisection so I simply added the fixes and did not fold the fixes into the changes they were fixing. There was a bug that broke coredumps piped to systemd-coredump. I dropped the change that caused that bug and replaced it entirely with something much more restrained. Unfortunately that required some rebasing. Some successes after this set of changes: There are few enough calls to do_exit to audit in a reasonable amount of time. The lifetime of struct kthread now matches the lifetime of struct task, and the pointer to struct kthread is no longer stored in set_child_tid. The flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is removed. Issues where task->exit_code was examined with signal->group_exit_code should been examined were fixed. There are several loosely related changes included because I am cleaning up and if I don't include them they will probably get lost. The original postings of these changes can be found at: https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org I trimmed back the last set of changes to only the obviously correct once. Simply because there was less time for review than I had hoped" * 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits) ptrace/m68k: Stop open coding ptrace_report_syscall ptrace: Remove unused regs argument from ptrace_report_syscall ptrace: Remove second setting of PT_SEIZED in ptrace_attach taskstats: Cleanup the use of task->exit_code exit: Use the correct exit_code in /proc//stat exit: Fix the exit_code for wait_task_zombie exit: Coredumps reach do_group_exit exit: Remove profile_handoff_task exit: Remove profile_task_exit & profile_munmap signal: clean up kernel-doc comments signal: Remove the helper signal_group_exit signal: Rename group_exit_task group_exec_task coredump: Stop setting signal->group_exit_task signal: Remove SIGNAL_GROUP_COREDUMP signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process signal: Make coredump handling explicit in complete_signal signal: Have prepare_signal detect coredumps using signal->core_state signal: Have the oom killer detect coredumps using signal->core_state exit: Move force_uaccess back into do_exit exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit ...

s390/nmi: disable interrupts on extended save area update

2021-12-16T18:58:07Z

Updating of the pointer to machine check extended save area on the IPL CPU needs the lowcore protection to be disabled. Disable interrupts while the protection is off to avoid unnoticed writes to the lowcore. Suggested-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Heiko Carstens

exit: Add and use make_task_dead.

2021-12-13T18:04:45Z

There are two big uses of do_exit. The first is it's design use to be the guts of the exit(2) system call. The second use is to terminate a task after something catastrophic has happened like a NULL pointer in kernel code. Add a function make_task_dead that is initialy exactly the same as do_exit to cover the cases where do_exit is called to handle catastrophic failure. In time this can probably be reduced to just a light wrapper around do_task_dead. For now keep it exactly the same so that there will be no behavioral differences introducing this new concept. Replace all of the uses of do_exit that use it for catastraphic task cleanup with make_task_dead to make it clear what the code is doing. As part of this rename rewind_stack_do_exit rewind_stack_and_make_dead. Signed-off-by: "Eric W. Biederman"

s390/nmi: add missing pa/va address conversion of extended save area

2021-12-06T13:42:26Z

Add missing __pa/__va address conversion of machine check extended save area designation, which is an absolute address. Note: this currently doesn't fix a real bug, since virtual addresses are indentical to physical ones. Reported-by: Vineeth Vijayan Tested-by: Vineeth Vijayan Signed-off-by: Heiko Carstens