kernel.git/arch/s390/kernel/machine_kexec.c, branch linux-5.18.y

s390/kexec: silence -Warray-bounds warning

2022-04-07T10:36:54Z

Just use absolute_pointer() like e.g. in commit 545c272232ca ("alpha: Silence -Warray-bounds warnings") to get rid of this warning: arch/s390/kernel/machine_kexec.c:59:9: warning: ‘memcpy’ offset [0, 511] is out of the bounds [0, 0] [-Warray-bounds] Signed-off-by: Heiko Carstens

s390/maccess: rework absolute lowcore accessors

2022-03-27T20:18:39Z

Macro mem_assign_absolute() is able to access the whole memory, but is only used and makes sense when updating the absolute lowcore. Instead, introduce get_abs_lowcore() and put_abs_lowcore() macros that limit access to absolute lowcore addresses only. Suggested-by: Heiko Carstens Reviewed-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Vasily Gorbik

s390: remove invalid email address of Heiko Carstens

2022-02-06T22:31:29Z

Remove my old invalid email address which can be found in a couple of files. Instead of updating it, just remove my contact data completely from source files. We have git and other tools which allow to figure out who is responsible for what with recent contact data. Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/nmi: add missing pa/va address conversion of extended save area

2021-12-06T13:42:26Z

Add missing __pa/__va address conversion of machine check extended save area designation, which is an absolute address. Note: this currently doesn't fix a real bug, since virtual addresses are indentical to physical ones. Reported-by: Vineeth Vijayan Tested-by: Vineeth Vijayan Signed-off-by: Heiko Carstens

s390/smp: enable DAT before CPU restart callback is called

2021-08-26T18:22:12Z

The restart interrupt is triggered whenever a secondary CPU is brought online, a remote function call dispatched from another CPU or a manual PSW restart is initiated and causes the system to kdump. The handling routine is always called with DAT turned off. It then initializes the stack frame and invokes a callback. The existing callbacks handle DAT as follows: * __do_restart() and __machine_kexec() turn in on upon entry; * __ipl_run(), __reipl_run() and __dump_run() do not turn it right away, but all of them call diag308() - which turns DAT on, but only if kasan is enabled; In addition to the described complexity all callbacks (and the functions they call) should avoid kasan instrumentation while DAT is off. This update enables DAT in the assembler restart handler and relieves any callbacks (which are mostly C functions) from dealing with DAT altogether. There are four types of CPU restart that initialize control registers in different ways: 1. Start of secondary CPU on boot - control registers are inherited from the IPL CPU; 2. Restart of online CPU - control registers of the CPU being restarted are kept; 3. Hotplug of offline CPU - control registers are inherited from the starting CPU; 4. Start of offline CPU triggered by manual PSW restart - the control registers are read from the absolute lowcore and contain the boot time IPL CPU values updated with all follow-up calls of smp_ctl_set_bit() and smp_ctl_clear_bit() routines; In first three cases contents of the control registers is the most recent. In the latter case control registers are good enough to facilitate successful completion of kdump operation. Suggested-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Heiko Carstens

s390: rename dma section to amode31

2021-08-05T12:10:53Z

The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik Reviewed-by: Alexander Egorenkov Signed-off-by: Heiko Carstens

s390/kexec: use call_on_stack() macro

2021-07-08T20:12:18Z

Reviewed-by: Sven Schnelle Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

mm: remove unneeded includes of

2020-08-07T18:33:26Z

Patch series "mm: cleanup usage of " Most architectures have very similar versions of pXd_alloc_one() and pXd_free_one() for intermediate levels of page table. These patches add generic versions of these functions in and enable use of the generic functions where appropriate. In addition, functions declared and defined in headers are used mostly by core mm and early mm initialization in arch and there is no actual reason to have the included all over the place. The first patch in this series removes unneeded includes of In the end it didn't work out as neatly as I hoped and moving pXd_alloc_track() definitions to would require unnecessary changes to arches that have custom page table allocations, so I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local to mm/. This patch (of 8): In most cases header is required only for allocations of page table memory. Most of the .c files that include that header do not use symbols declared in and do not require that header. As for the other header files that used to include , it is possible to move that include into the .c file that actually uses symbols from and drop the include from the header file. The process was somewhat automated using sed -i -E '/[<"]asm\/pgalloc\.h/d' \ $(grep -L -w -f /tmp/xx \ $(git grep -E -l '[<"]asm/pgalloc\.h')) where /tmp/xx contains all the symbols defined in arch/*/include/asm/pgalloc.h. [rppt@linux.ibm.com: fix powerpc warning] Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Reviewed-by: Pekka Enberg Acked-by: Geert Uytterhoeven [m68k] Cc: Abdul Haleem Cc: Andy Lutomirski Cc: Arnd Bergmann Cc: Christophe Leroy Cc: Joerg Roedel Cc: Max Filippov Cc: Peter Zijlstra Cc: Satheesh Rajendran Cc: Stafford Horne Cc: Stephen Rothwell Cc: Steven Rostedt Cc: Joerg Roedel Cc: Matthew Wilcox Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org Signed-off-by: Linus Torvalds

mm: don't include asm/pgtable.h if linux/mm.h is already included

2020-06-09T16:39:13Z

Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include in the files that include . The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include ") ; do sed -i -e '/include / d' $f done Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Mike Rapoport Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds

s390: remove broken hibernate / power management support

2020-03-23T12:41:55Z

Hibernation is known to be broken for many years on s390. Given that there aren't any real use cases, remove the code instead of spending time to fix and maintain it. Without hibernate support it doesn't make too much sense to keep power management support; therefore remove it completely. Acked-by: Christian Borntraeger Acked-by: Peter Oberparleiter Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik