kernel.git/arch/s390/kernel/ipl.c, branch linux-3.1.y

[S390] Change default action from reipl to stop for on_restart

2011-08-24T15:15:24Z

The main purpose for PSW restart will be kdump. Therefore customers will issue "system restart" for creating a dump. If kdump is not enabled, currently "PSW restart" will reboot the system and then no dump can be created any more. In order to still allow a manual stand-alone dump in the case a user issues "PSW restart" on a system that has not enabled kdump we now stop the system. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky

[S390] arch/s390/kernel/ipl.c: correct error detection check

2011-08-24T15:15:24Z

reipl_fcp_kset was just initialized, so it appears that it should be tested instead of reipl_kset. Signed-off-by: Julia Lawall Reported-by: Suman Saha Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

[S390] Use diagnose 308 for system reset

2011-08-03T14:44:19Z

The diagnose 308 call is the prefered method for clearing all ongoing I/O. Therefore if it is available we use it instead of doing a manual reset. Signed-off-by: Michael Holzheu Signed-off-by: Heiko Carstens

[S390] Add PSW restart shutdown trigger

2011-08-03T14:44:19Z

With this patch a new S390 shutdown trigger "restart" is added. If under z/VM "systerm restart" is entered or under the HMC the "PSW restart" button is pressed, the PSW located at 0 (31 bit) or 0x1a0 (64 bit) bit is loaded. Now we execute do_restart() that processes the restart action that is defined under /sys/firmware/shutdown_actions/on_restart. Currently the following actions are possible: reipl (default), stop, vmcmd, dump, and dump_reipl. Signed-off-by: Michael Holzheu Signed-off-by: Heiko Carstens

sysfs: add struct file* to bin_attr callbacks

2010-05-21T16:37:31Z

This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright Signed-off-by: Greg Kroah-Hartman

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

[S390] Cleanup struct _lowcore usage and defines.

2010-02-26T21:37:31Z

Use asm offsets to make sure the offset defines to struct _lowcore and its layout don't get out of sync. Also add a BUILD_BUG_ON() which checks that the size of the structure is sane. And while being at it change those sites which use odd casts to access the current lowcore. These should use S390_lowcore instead. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

[S390] Replace ENOTSUPP usage with EOPNOTSUPP

2010-02-26T21:37:31Z

ENOTSUPP is not supposed to leak to userspace so lets just use EOPNOTSUPP everywhere. Doesn't fix a bug, but makes future reviews easier. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

[S390] smp: rework sigp code

2010-02-26T21:37:30Z

Rename signal_processor* functions to sigp*. Add raw variants of each version, so we can get rid of the hacks played in smp code which establish temporary cpu logical mappings so they could call the sigp functions. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

[S390] smp: always reboot on cpu 0

2010-02-26T21:37:30Z

Always reboot on logical cpu 0. This makes sure that the IPL cpu is always the same and usually avoids strange numbering schemes between physical and logical cpus. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky