kernel.git/arch/s390/include/asm/pgtable.h, branch linux-3.19.y

s390/mm: pmdp_get_and_clear_full optimization

2014-10-27T12:27:30Z

Analog to ptep_get_and_clear_full define a variant of the pmpd_get_and_clear primitive which gets the full hint from the mmu_gather struct. This allows s390 to avoid a costly instruction when destroying an address space. Signed-off-by: Martin Schwidefsky

s390/ftrace,kprobes: allow to patch first instruction

2014-10-27T12:27:27Z

If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/mm: disable KSM for storage key enabled pages

2014-10-27T12:27:26Z

When storage keys are enabled unmerge already merged pages and prevent new pages from being merged. Signed-off-by: Dominik Dingel Acked-by: Christian Borntraeger Reviewed-by: Paolo Bonzini Signed-off-by: Martin Schwidefsky

s390/mm: prevent and break zero page mappings in case of storage keys

2014-10-27T12:27:25Z

As soon as storage keys are enabled we need to stop working on zero page mappings to prevent inconsistencies between storage keys and pgste. Otherwise following data corruption could happen: 1) guest enables storage key 2) guest sets storage key for not mapped page X -> change goes to PGSTE 3) guest reads from page X -> as X was not dirty before, the page will be zero page backed, storage key from PGSTE for X will go to storage key for zero page 4) guest sets storage key for not mapped page Y (same logic as above 5) guest reads from page Y -> as Y was not dirty before, the page will be zero page backed, storage key from PGSTE for Y will got to storage key for zero page overwriting storage key for X While holding the mmap sem, we are safe against changes on entries we already fixed, as every fault would need to take the mmap_sem (read). Other vCPUs executing storage key instructions will get a one time interception and be serialized also with mmap_sem. Signed-off-by: Dominik Dingel Reviewed-by: Paolo Bonzini Signed-off-by: Martin Schwidefsky

s390/mm: recfactor global pgste updates

2014-10-27T12:27:23Z

Replace the s390 specific page table walker for the pgste updates with a call to the common code walk_page_range function. There are now two pte modification functions, one for the reset of the CMMA state and another one for the initialization of the storage keys. Signed-off-by: Dominik Dingel Signed-off-by: Martin Schwidefsky

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2014-10-14T01:47:00Z

Pull s390 updates from Martin Schwidefsky: "This patch set contains the main portion of the changes for 3.18 in regard to the s390 architecture. It is a bit bigger than usual, mainly because of a new driver and the vector extension patches. The interesting bits are: - Quite a bit of work on the tracing front. Uprobes is enabled and the ftrace code is reworked to get some of the lost performance back if CONFIG_FTRACE is enabled. - To improve boot time with CONFIG_DEBIG_PAGEALLOC, support for the IPTE range facility is added. - The rwlock code is re-factored to improve writer fairness and to be able to use the interlocked-access instructions. - The kernel part for the support of the vector extension is added. - The device driver to access the CD/DVD on the HMC is added, this will hopefully come in handy to improve the installation process. - Add support for control-unit initiated reconfiguration. - The crypto device driver is enhanced to enable the additional AP domains and to allow the new crypto hardware to be used. - Bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits) s390/ftrace: simplify enabling/disabling of ftrace_graph_caller s390/ftrace: remove 31 bit ftrace support s390/kdump: add support for vector extension s390/disassembler: add vector instructions s390: add support for vector extension s390/zcrypt: Toleration of new crypto hardware s390/idle: consolidate idle functions and definitions s390/nohz: use a per-cpu flag for arch_needs_cpu s390/vtime: do not reset idle data on CPU hotplug s390/dasd: add support for control unit initiated reconfiguration s390/dasd: fix infinite loop during format s390/mm: make use of ipte range facility s390/setup: correct 4-level kernel page table detection s390/topology: call set_sched_topology early s390/uprobes: architecture backend for uprobes s390/uprobes: common library for kprobes and uprobes s390/rwlock: use the interlocked-access facility 1 instructions s390/rwlock: improve writer fairness s390/rwlock: remove interrupt-enabling rwlock variant. s390/mm: remove change bit override support ...

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2014-10-08T09:27:39Z

Pull KVM updates from Paolo Bonzini: "Fixes and features for 3.18. Apart from the usual cleanups, here is the summary of new features: - s390 moves closer towards host large page support - PowerPC has improved support for debugging (both inside the guest and via gdbstub) and support for e6500 processors - ARM/ARM64 support read-only memory (which is necessary to put firmware in emulated NOR flash) - x86 has the usual emulator fixes and nested virtualization improvements (including improved Windows support on Intel and Jailhouse hypervisor support on AMD), adaptive PLE which helps overcommitting of huge guests. Also included are some patches that make KVM more friendly to memory hot-unplug, and fixes for rare caching bugs. Two patches have trivial mm/ parts that were acked by Rik and Andrew. Note: I will soon switch to a subkey for signing purposes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (157 commits) kvm: do not handle APIC access page if in-kernel irqchip is not in use KVM: s390: count vcpu wakeups in stat.halt_wakeup KVM: s390/facilities: allow TOD-CLOCK steering facility bit KVM: PPC: BOOK3S: HV: CMA: Reserve cma region only in hypervisor mode arm/arm64: KVM: Report correct FSC for unsupported fault types arm/arm64: KVM: Fix VTTBR_BADDR_MASK and pgd alloc kvm: Fix kvm_get_page_retry_io __gup retval check arm/arm64: KVM: Fix set_clear_sgi_pend_reg offset kvm: x86: Unpin and remove kvm_arch->apic_access_page kvm: vmx: Implement set_apic_access_page_addr kvm: x86: Add request bit to reload APIC access page address kvm: Add arch specific mmu notifier for page invalidation kvm: Rename make_all_cpus_request() to kvm_make_all_cpus_request() and make it non-static kvm: Fix page ageing bugs kvm/x86/mmu: Pass gfn and level to rmapp callback. x86: kvm: use alternatives for VMCALL vs. VMMCALL if kernel text is read-only kvm: x86: use macros to compute bank MSRs KVM: x86: Remove debug assertion of non-PAE reserved bits kvm: don't take vcpu mutex for obviously invalid vcpu ioctls kvm: Faults which trigger IO release the mmap_sem ...

s390/mm: make use of ipte range facility

2014-09-30T08:19:29Z

Invalidate several pte entries at once if the ipte range facility is available. Currently this works only for DEBUG_PAGE_ALLOC where several up to 2 ^ MAX_ORDER may be invalidated at once. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/mm: remove change bit override support

2014-09-25T08:52:09Z

Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

KVM: s390/mm: Fix guest storage key corruption in ptep_set_access_flags

2014-09-02T08:30:43Z

commit 0944fe3f4a32 ("s390/mm: implement software referenced bits") triggered another paging/storage key corruption. There is an unhandled invalid->valid pte change where we have to set the real storage key from the pgste. When doing paging a guest page might be swapcache or swap and when faulted in it might be read-only and due to a parallel scan old. An do_wp_page will make it writeable and young. Due to software reference tracking this page was invalid and now becomes valid. Signed-off-by: Christian Borntraeger Acked-by: Martin Schwidefsky Cc: stable@vger.kernel.org # v3.12+