kernel.git/arch/s390/hypfs, branch linux-4.10.y

s390: hypfs: make inode explicitly non-modular

2016-10-31T16:55:40Z

The Kconfig currently controlling compilation of this code is: arch/s390/Kconfig:config S390_HYPFS_FS arch/s390/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Also note that MODULE_ALIAS is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Build testing indicated the presence of module.h was masking an implicit include of kobject.h, hence the addition of that. Cc: linux-s390@vger.kernel.org Signed-off-by: Paul Gortmaker Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/hypfs: Use get_free_page() instead of kmalloc to ensure page alignment

2016-10-28T08:08:58Z

Since commit d86bd1bece6f ("mm/slub: support left redzone") it is no longer guaranteed that kmalloc(PAGE_SIZE) returns page aligned memory. After the above commit we get an error for diag224 because aligned memory is required. This leads to the following user visible error: # mount none -t s390_hypfs /sys/hypervisor/ mount: unknown filesystem type 's390_hypfs' # dmesg | grep hypfs hypfs.cccfb8: The hardware system does not provide all functions required by hypfs hypfs.7a79f0: Initialization of hypfs failed with rc=-61 Fix this problem and use get_free_page() instead of kmalloc() to get correctly aligned memory. Cc: stable@vger.kernel.org # v3.6+ Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky

fs: Replace CURRENT_TIME with current_time() for inode timestamps

2016-09-28T01:06:21Z

CURRENT_TIME macro is not appropriate for filesystems as it doesn't use the right granularity for filesystem timestamps. Use current_time() instead. CURRENT_TIME is also not y2038 safe. This is also in preparation for the patch that transitions vfs timestamps to use 64 bit time and hence make them y2038 safe. As part of the effort current_time() will be extended to do range checks. Hence, it is necessary for all file system timestamps to use current_time(). Also, current_time() will be transitioned along with vfs to be y2038 safe. Note that whenever a single call to current_time() is used to change timestamps in different inodes, it is because they share the same time granularity. Signed-off-by: Deepa Dinamani Reviewed-by: Arnd Bergmann Acked-by: Felipe Balbi Acked-by: Steven Whitehouse Acked-by: Ryusuke Konishi Acked-by: David Sterba Signed-off-by: Al Viro

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2016-08-02T20:11:27Z

Pull KVM updates from Paolo Bonzini: - ARM: GICv3 ITS emulation and various fixes. Removal of the old VGIC implementation. - s390: support for trapping software breakpoints, nested virtualization (vSIE), the STHYI opcode, initial extensions for CPU model support. - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups, preliminary to this and the upcoming support for hardware virtualization extensions. - x86: support for execute-only mappings in nested EPT; reduced vmexit latency for TSC deadline timer (by about 30%) on Intel hosts; support for more than 255 vCPUs. - PPC: bugfixes. * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits) KVM: PPC: Introduce KVM_CAP_PPC_HTM MIPS: Select HAVE_KVM for MIPS64_R{2,6} MIPS: KVM: Reset CP0_PageMask during host TLB flush MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX() MIPS: KVM: Sign extend MFC0/RDHWR results MIPS: KVM: Fix 64-bit big endian dynamic translation MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase MIPS: KVM: Use 64-bit CP0_EBase when appropriate MIPS: KVM: Set CP0_Status.KX on MIPS64 MIPS: KVM: Make entry code MIPS64 friendly MIPS: KVM: Use kmap instead of CKSEG0ADDR() MIPS: KVM: Use virt_to_phys() to get commpage PFN MIPS: Fix definition of KSEGX() for 64-bit KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD kvm: x86: nVMX: maintain internal copy of current VMCS KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures KVM: arm64: vgic-its: Simplify MAPI error handling KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers KVM: arm64: vgic-its: Turn device_id validation into generic ID validation ...

s390/hypfs: use basic block for diag inline assembly

2016-06-28T07:32:37Z

Use only simple inline assemblies which consist of a single basic block if the register asm construct is being used. Otherwise gcc would generate broken code if the compiler option --sanitize-coverage=trace-pc would be used. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390: avoid extable collisions

2016-06-13T13:58:26Z

We have some inline assemblies where the extable entry points to a label at the end of an inline assembly which is not followed by an instruction. On the other hand we have also inline assemblies where the extable entry points to the first instruction of an inline assembly. If a first type inline asm (extable point to empty label at the end) would be directly followed by a second type inline asm (extable points to first instruction) then we would have two different extable entries that point to the same instruction but would have a different target address. This can lead to quite random behaviour, depending on sorting order. I verified that we currently do not have such collisions within the kernel. However to avoid such subtle bugs add a couple of nop instructions to those inline assemblies which contain an extable that points to an empty label. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390: Make diag224 public

2016-06-10T10:07:10Z

Diag204's cpu structures only contain the cpu type by means of an index in the diag224 name table. Hence, to be able to use diag204 in any meaningful way, we also need a usable diag224 interface. Signed-off-by: Janosch Frank Reviewed-by: Christian Borntraeger Reviewed-by: David Hildenbrand Acked-by: Heiko Carstens Signed-off-by: Christian Borntraeger

s390: hypfs: Move diag implementation and data definitions

2016-06-10T10:07:09Z

Diag 204 data and function definitions currently live in the hypfs files. As KVM will be a consumer of this data, we need to make it publicly available and move it to the appropriate diag.{c,h} files. __attribute__ ((packed)) occurences were replaced with __packed for all moved structs. Signed-off-by: Janosch Frank Reviewed-by: David Hildenbrand Acked-by: Michael Holzheu Signed-off-by: Christian Borntraeger

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros

2016-04-04T17:41:08Z

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ; - >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov Acked-by: Michal Hocko Signed-off-by: Linus Torvalds

wrappers for ->i_mutex access

2016-01-22T23:04:28Z

parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro