kernel.git/arch/s390/crypto, branch linux-4.14.y

s390/archrandom: simplify back to earlier design and initialize earlier

2022-07-07T15:31:16Z

commit e4f74400308cb8abde5fdc9cad609c2aba32110c upstream. s390x appears to present two RNG interfaces: - a "TRNG" that gathers entropy using some hardware function; and - a "DRBG" that takes in a seed and expands it. Previously, the TRNG was wired up to arch_get_random_{long,int}(), but it was observed that this was being called really frequently, resulting in high overhead. So it was changed to be wired up to arch_get_random_ seed_{long,int}(), which was a reasonable decision. Later on, the DRBG was then wired up to arch_get_random_{long,int}(), with a complicated buffer filling thread, to control overhead and rate. Fortunately, none of the performance issues matter much now. The RNG always attempts to use arch_get_random_seed_{long,int}() first, which means a complicated implementation of arch_get_random_{long,int}() isn't really valuable or useful to have around. And it's only used when reseeding, which means it won't hit the high throughput complications that were faced before. So this commit returns to an earlier design of just calling the TRNG in arch_get_random_seed_{long,int}(), and returning false in arch_get_ random_{long,int}(). Part of what makes the simplification possible is that the RNG now seeds itself using the TRNG at bootup. But this only works if the TRNG is detected early in boot, before random_init() is called. So this commit also causes that check to happen in setup_arch(). Cc: stable@vger.kernel.org Cc: Harald Freudenberger Cc: Ingo Franzki Cc: Juergen Christ Cc: Heiko Carstens Signed-off-by: Jason A. Donenfeld Link: https://lore.kernel.org/r/20220610222023.378448-1-Jason@zx2c4.com Reviewed-by: Harald Freudenberger Acked-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding

2019-10-05T10:48:01Z

[ Upstream commit 9e323d45ba94262620a073a3f9945ca927c07c71 ] With 'extra run-time crypto self tests' enabled, the selftest for s390-xts fails with alg: skcipher: xts-aes-s390 encryption unexpectedly succeeded on test vector "random: len=0 klen=64"; expected_error=-22, cfg="random: inplace use_digest nosimd src_divs=[2.61%@+4006, 84.44%@+21, 1.55%@+13, 4.50%@+344, 4.26%@+21, 2.64%@+27]" This special case with nbytes=0 is not handled correctly and this fix now makes sure that -EINVAL is returned when there is en/decrypt called with 0 bytes to en/decrypt. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin

s390/crypto: Fix return code checking in cbc_paes_crypt()

2018-09-26T06:38:06Z

commit b81126e01a8c6048249955feea46c8217ebefa91 upstream. The return code of cpacf_kmc() is less than the number of bytes to process in case of an error, not greater. The crypt routines for the other cipher modes already have this correctly. Cc: stable@vger.kernel.org # v4.11+ Fixes: 279378430768 ("s390/crypt: Add protected key AES module") Signed-off-by: Ingo Franzki Acked-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

s390/crc32-vx: use expoline for indirect branches

2018-05-25T14:17:32Z

[ Upstream commit 467a3bf219cee12259182c5cb4821f88fd518a51 ] The return from the crc32_le_vgfm_16/crc32c_le_vgfm_16 and the crc32_be_vgfm_16 functions are done with "br %r14". These are indirect branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Reviewed-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

crypto: hash - annotate algorithms taking optional key

2018-02-16T19:23:00Z

commit a208fa8f33031b9e0aba44c7d1b7e68eb0cbd29e upstream. We need to consistently enforce that keyed hashes cannot be used without setting the key. To do this we need a reliable way to determine whether a given hash algorithm is keyed or not. AF_ALG currently does this by checking for the presence of a ->setkey() method. However, this is actually slightly broken because the CRC-32 algorithms implement ->setkey() but can also be used without a key. (The CRC-32 "key" is not actually a cryptographic key but rather represents the initial state. If not overridden, then a default initial state is used.) Prepare to fix this by introducing a flag CRYPTO_ALG_OPTIONAL_KEY which indicates that the algorithm has a ->setkey() method, but it is not required to be called. Then set it on all the CRC-32 algorithms. The same also applies to the Adler-32 implementation in Lustre. Also, the cryptd and mcryptd templates have to pass through the flag from their underlying algorithm. Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

s390/crypto: fix aes/paes Kconfig dependeny

2017-06-12T14:25:58Z

The s390_paes and the s390_aes kernel module used just one config symbol CONFIG_CRYPTO_AES. As paes has a dependency to PKEY and this requires ZCRYPT the aes module also had a dependency to the zcrypt device driver which is not true. Fixed by introducing a new config symbol CONFIG_CRYPTO_PAES which has dependencies to PKEY and ZCRYPT. Removed the dependency for the aes module to ZCRYPT. Signed-off-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky

s390: add missing header includes for type checking

2017-06-12T14:25:55Z

Add missing include statements to make sure that prototypes match implementation. As reported by sparse: arch/s390/crypto/arch_random.c:18:1: warning: symbol 's390_arch_random_available' was not declared. Should it be static? arch/s390/kernel/traps.c:279:13: warning: symbol 'trap_init' was not declared. Should it be static? Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/crypt: use the correct module alias for paes_s390.

2017-04-26T14:52:57Z

For automatic module loading (e.g. as it is used with cryptsetup) an alias "paes" for the paes_s390 kernel module is needed. Correct the paes_s390 module alias from "aes-all" to "paes". Signed-off-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky

s390/crypto: Provide s390 specific arch random functionality.

2017-04-26T11:41:35Z

This patch introduces s390 specific arch random functionality. There exists a generic kernel API for arch specific random number implementation (see include/linux/random.h). Here comes the header file and a very small static code part implementing the arch_random_* API based on the TRNG subfunction coming with the reworked PRNG instruction. The arch random implementation hooks into the kernel initialization and checks for availability of the TRNG function. In accordance to the arch random API all functions return false if the TRNG is not available. Otherwise the new high quality entropy source provides fresh random on each invocation. The s390 arch random feature build is controlled via CONFIG_ARCH_RANDOM. This config option located in arch/s390/Kconfig is enabled by default and appears as entry "s390 architectural random number generation API" in the submenu "Processor type and features" for s390 builds. Signed-off-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky