kernel.git/arch/s390/boot, branch linux-4.14.y

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

s390/decompressor: fix initrd corruption caused by bss clear

2017-03-22T07:21:20Z

Reorder the operations in decompress_kernel() to ensure initrd is moved to a safe location before the bss section is zeroed. During decompression bss can overlap with the initrd and this can corrupt the initrd contents depending on the size of the compressed kernel (which affects where the initrd is placed by the bootloader) and the size of the bss section of the decompressor. Also use the correct initrd size when checking for overlaps with parmblock. Fixes: 06c0dd72aea3 ([S390] fix boot failures with compressed kernels) Cc: stable@vger.kernel.org Reviewed-by: Joy Latten Reviewed-by: Vineetha HariPai Signed-off-by: Marcelo Henrique Cerri Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/sclp: make early sclp code readable

2017-02-08T13:13:19Z

This patch - unifies the old sclp early code and the sclp early printk code, so they can use common functions - makes sure all sclp early functions and variables have the same "sclp_early" prefix - converts the sclp early printk code into readable code by using existing data structures instead of hard coded magic arrays - splits the early sclp code into two files: sclp_early.c and sclp_early_core.c. The core file contains everything that is required by the kernel decompressor and may not call functions not contained within the core file. Otherwise the result would be a link error. - changes interrupt handling to be completely synchronous. The old early sclp code had a small window which allowed to receive several interrupts instead of exactly the single expected interrupt. This did hide a subtle potential bug, which is fixed with this large rework. - contains a couple of small cleanups. Reviewed-by: Peter Oberparleiter Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/sclp: move early printk code to drivers

2017-02-08T13:13:17Z

Move the early sclp printk code to the drivers folder where also the rest of the sclp code can be found. This way it is possible to use the sclp private header files for further cleanups. Reviewed-by: Peter Oberparleiter Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

Replace with globally

2016-12-24T19:46:01Z

This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2016-12-14T19:12:25Z

Pull trivial updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: NTB: correct ntb_spad_count comment typo misc: ibmasm: fix typo in error message Remove references to dead make variable LINUX_INCLUDE Remove last traces of ikconfig.h treewide: Fix printk() message errors Documentation/device-mapper: s/getsize/getsz/

Remove references to dead make variable LINUX_INCLUDE

2016-12-14T09:54:28Z

Commit 4fd06960f120 ("Use the new x86 setup code for i386") introduced a reference to the make variable LINUX_INCLUDE. That reference got moved around a bit and copied twice and now there are three references to it. There has never been a definition of that variable. (Presumably that is because it started out as a mistyped reference to LINUXINCLUDE.) So this reference has always been an empty string. Let's remove it before it spreads any further. Signed-off-by: Paul Bolle Signed-off-by: Jiri Kosina

s390/thread_info: get rid of THREAD_ORDER define

2016-11-23T15:02:21Z

We have the s390 specific THREAD_ORDER define and the THREAD_SIZE_ORDER define which is also used in common code. Both have exactly the same semantics. Therefore get rid of THREAD_ORDER and always use THREAD_SIZE_ORDER instead. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390: enable UBSAN

2016-09-20T12:26:23Z

This enables UBSAN for s390. We have to disable the null sanitizer as s390 code does access memory via a null pointer (the prefix page). Signed-off-by: Christian Borntraeger Acked-by: Andrey Ryabinin Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390: clarify compressed image code path

2016-08-08T13:41:31Z

The way the decompressor is hooked into the start-up code is rather subtle, with a mix of multiply-defined symbols and hardcoded address literals. Add some comments at the junction points to clarify how it works. Signed-off-by: Sascha Silbe Signed-off-by: Martin Schwidefsky