kernel.git/arch/riscv/kernel/smpboot.c, branch linux-5.5.y

riscv: provide native clint access for M-mode

2019-11-17T23:17:39Z

RISC-V has the concept of a cpu level interrupt controller. The interface for it is split between a standardized part that is exposed as bits in the mstatus/sstatus register and the mie/mip/sie/sip CRS. But the bit to actually trigger IPIs is not standardized and just mentioned as implementable using MMIO. Add support for IPIs using MMIO using the SiFive clint layout (which is also shared by Ariane, Kendryte and the Qemu virt platform). Additionally the MMIO block also supports the time value and timer compare registers, so they are also set up using the same OF node. Support for other layouts should also be relatively easy to add in the future. Signed-off-by: Christoph Hellwig Reviewed-by: Anup Patel [paul.walmsley@sifive.com: update include guard format; fix checkpatch issues; minor commit message cleanup] Signed-off-by: Paul Walmsley

riscv: for C functions called only from assembly, mark with __visible

2019-10-28T07:46:02Z

Rather than adding prototypes for C functions called only by assembly code, mark them as __visible. This avoids adding prototypes that will never be used by the callers. Resolves the following sparse warnings: arch/riscv/kernel/irq.c:27:29: warning: symbol 'do_IRQ' was not declared. Should it be static? arch/riscv/kernel/ptrace.c:151:6: warning: symbol 'do_syscall_trace_enter' was not declared. Should it be static? arch/riscv/kernel/ptrace.c:165:6: warning: symbol 'do_syscall_trace_exit' was not declared. Should it be static? arch/riscv/kernel/signal.c:295:17: warning: symbol 'do_notify_resume' was not declared. Should it be static? arch/riscv/kernel/traps.c:92:1: warning: symbol 'do_trap_unknown' was not declared. Should it be static? arch/riscv/kernel/traps.c:94:1: warning: symbol 'do_trap_insn_misaligned' was not declared. Should it be static? arch/riscv/kernel/traps.c:96:1: warning: symbol 'do_trap_insn_fault' was not declared. Should it be static? arch/riscv/kernel/traps.c:98:1: warning: symbol 'do_trap_insn_illegal' was not declared. Should it be static? arch/riscv/kernel/traps.c:100:1: warning: symbol 'do_trap_load_misaligned' was not declared. Should it be static? arch/riscv/kernel/traps.c:102:1: warning: symbol 'do_trap_load_fault' was not declared. Should it be static? arch/riscv/kernel/traps.c:104:1: warning: symbol 'do_trap_store_misaligned' was not declared. Should it be static? arch/riscv/kernel/traps.c:106:1: warning: symbol 'do_trap_store_fault' was not declared. Should it be static? arch/riscv/kernel/traps.c:108:1: warning: symbol 'do_trap_ecall_u' was not declared. Should it be static? arch/riscv/kernel/traps.c:110:1: warning: symbol 'do_trap_ecall_s' was not declared. Should it be static? arch/riscv/kernel/traps.c:112:1: warning: symbol 'do_trap_ecall_m' was not declared. Should it be static? arch/riscv/kernel/traps.c:124:17: warning: symbol 'do_trap_break' was not declared. Should it be static? arch/riscv/kernel/smpboot.c:136:24: warning: symbol 'smp_callin' was not declared. Should it be static? Based on a suggestion from Luc Van Oostenryck. This version includes changes based on feedback from Christoph Hellwig . Signed-off-by: Paul Walmsley Cc: Luc Van Oostenryck Reviewed-by: Christoph Hellwig # for do_syscall_trace_*

riscv: add missing header file includes

2019-10-28T07:46:01Z

sparse identifies several missing prototypes caused by missing preprocessor include directives: arch/riscv/kernel/cpufeature.c:16:6: warning: symbol 'has_fpu' was not declared. Should it be static? arch/riscv/kernel/process.c:26:6: warning: symbol 'arch_cpu_idle' was not declared. Should it be static? arch/riscv/kernel/reset.c:15:6: warning: symbol 'pm_power_off' was not declared. Should it be static? arch/riscv/kernel/syscall_table.c:15:6: warning: symbol 'sys_call_table' was not declared. Should it be static? arch/riscv/kernel/traps.c:149:13: warning: symbol 'trap_init' was not declared. Should it be static? arch/riscv/kernel/vdso.c:54:5: warning: symbol 'arch_setup_additional_pages' was not declared. Should it be static? arch/riscv/kernel/smp.c:64:6: warning: symbol 'arch_match_cpu_phys_id' was not declared. Should it be static? arch/riscv/kernel/module-sections.c:89:5: warning: symbol 'module_frob_arch_sections' was not declared. Should it be static? arch/riscv/mm/context.c:42:6: warning: symbol 'switch_mm' was not declared. Should it be static? Fix by including the appropriate header files in the appropriate source files. This patch should have no functional impact. Signed-off-by: Paul Walmsley Reviewed-by: Christoph Hellwig

riscv: add prototypes for assembly language functions from head.S

2019-10-28T07:46:00Z

Add prototypes for assembly language functions defined in head.S, and include these prototypes into C source files that call those functions. This patch resolves the following warnings from sparse: arch/riscv/kernel/setup.c:39:10: warning: symbol 'hart_lottery' was not declared. Should it be static? arch/riscv/kernel/setup.c:42:13: warning: symbol 'parse_dtb' was not declared. Should it be static? arch/riscv/kernel/smpboot.c:33:6: warning: symbol '__cpu_up_stack_pointer' was not declared. Should it be static? arch/riscv/kernel/smpboot.c:34:6: warning: symbol '__cpu_up_task_pointer' was not declared. Should it be static? arch/riscv/mm/fault.c:25:17: warning: symbol 'do_page_fault' was not declared. Should it be static? This change should have no functional impact. Signed-off-by: Paul Walmsley

RISC-V: Parse cpu topology during boot.

2019-07-22T16:36:30Z

Currently, there are no topology defined for RISC-V. Parse the cpu-map node from device tree and setup the cpu topology. CPU topology after applying the patch. $cat /sys/devices/system/cpu/cpu2/topology/core_siblings_list 0-3 $cat /sys/devices/system/cpu/cpu3/topology/core_siblings_list 0-3 $cat /sys/devices/system/cpu/cpu3/topology/physical_package_id 0 $cat /sys/devices/system/cpu/cpu3/topology/core_id 3 Signed-off-by: Atish Patra Acked-by: Sudeep Holla Signed-off-by: Paul Walmsley

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

2019-05-30T18:26:41Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Kate Stewart Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman

RISC-V: Support nr_cpus command line option.

2019-05-17T03:42:04Z

If nr_cpus command line option is set, maximum possible cpu should be set to that value. Signed-off-by: Atish Patra Reviewed-by: Christoph Hellwig Signed-off-by: Palmer Dabbelt

RISC-V: Implement nosmp commandline option.

2019-04-30T16:47:45Z

nosmp command line option sets max_cpus to zero. No secondary harts will boot if this is enabled. But present cpu mask will still point to all possible masks. Fix present cpu mask for nosmp usecase. Signed-off-by: Atish Patra Reviewed-by: Christoph Hellwig Signed-off-by: Palmer Dabbelt

RISC-V: Compare cpuid with NR_CPUS before mapping.

2019-03-04T18:40:39Z

We should never have a cpuid greater that NR_CPUS. Compare with NR_CPUS before creating the mapping between logical and physical CPU ids. This is also mandatory as NR_CPUS check is removed from riscv_of_processor_hartid. Signed-off-by: Atish Patra Reviewed-by: Anup Patel Reviewed-by: Christoph Hellwig Signed-off-by: Palmer Dabbelt

RISC-V: Do not wait indefinitely in __cpu_up

2019-03-04T18:40:36Z

In SMP path, __cpu_up waits for other CPU to come online indefinitely. This is wrong as other CPU might be disabled in machine mode and possible CPU is set to the cpus present in DT. Introduce a completion variable and waits only for a second. Signed-off-by: Atish Patra Reviewed-by: Anup Patel Reviewed-by: Christoph Hellwig Signed-off-by: Palmer Dabbelt