kernel.git/arch/riscv/kernel/entry.S, branch linux-6.0.y

RISC-V: Fix unannoted hardirqs-on in return to userspace slow-path

2022-12-31T12:26:23Z

[ Upstream commit b0f4c74eadbf69a3298f38566bfaa2e202541f2f ] The return to userspace path in entry.S may enable interrupts without the corresponding lockdep annotation, producing a splat[0] when DEBUG_LOCKDEP is enabled. Simply calling __trace_hardirqs_on() here gets a bit messy due to the use of RA to point back to ret_from_exception, so just move the whole slow-path loop into C. It's more readable and it lets us use local_irq_{enable,disable}(), avoiding the need for manual annotations altogether. [0]: ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(!lockdep_hardirqs_enabled()) WARNING: CPU: 2 PID: 1 at kernel/locking/lockdep.c:5512 check_flags+0x10a/0x1e0 Modules linked in: CPU: 2 PID: 1 Comm: init Not tainted 6.1.0-rc4-00160-gb56b6e2b4f31 #53 Hardware name: riscv-virtio,qemu (DT) epc : check_flags+0x10a/0x1e0 ra : check_flags+0x10a/0x1e0 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [] lock_is_held_type+0x78/0x14e [] __might_resched+0x26/0x22c [] __might_sleep+0x3c/0x66 [] get_signal+0x9e/0xa70 [] do_notify_resume+0x6e/0x422 [] ret_from_exception+0x0/0x10 irq event stamp: 44512 hardirqs last enabled at (44511): [] _raw_spin_unlock_irqrestore+0x54/0x62 hardirqs last disabled at (44512): [] __trace_hardirqs_off+0xc/0x14 softirqs last enabled at (44472): [] __do_softirq+0x3de/0x51e softirqs last disabled at (44467): [] irq_exit+0xd6/0x104 ---[ end trace 0000000000000000 ]--- possible reason: unannotated irqs-on. Signed-off-by: Andrew Bresticker Fixes: 3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT") Link: https://lore.kernel.org/r/20221111223108.1976562-1-abrestic@rivosinc.com Signed-off-by: Palmer Dabbelt Signed-off-by: Sasha Levin

riscv: fix race when vmap stack overflow

2022-12-08T10:30:20Z

[ Upstream commit 7e1864332fbc1b993659eab7974da9fe8bf8c128 ] Currently, when detecting vmap stack overflow, riscv firstly switches to the so called shadow stack, then use this shadow stack to call the get_overflow_stack() to get the overflow stack. However, there's a race here if two or more harts use the same shadow stack at the same time. To solve this race, we introduce spin_shadow_stack atomic var, which will be swap between its own address and 0 in atomic way, when the var is set, it means the shadow_stack is being used; when the var is cleared, it means the shadow_stack isn't being used. Fixes: 31da94c25aea ("riscv: add VMAP_STACK overflow detection") Signed-off-by: Jisheng Zhang Suggested-by: Guo Ren Reviewed-by: Guo Ren Link: https://lore.kernel.org/r/20221030124517.2370-1-jszhang@kernel.org [Palmer: Add AQ to the swap, and also some comments.] Signed-off-by: Palmer Dabbelt Signed-off-by: Sasha Levin

context_tracking: Split user tracking Kconfig

2022-06-30T00:04:09Z

Context tracking is going to be used not only to track user transitions but also idle/IRQs/NMIs. The user tracking part will then become a separate feature. Prepare Kconfig for that. [ frederic: Apply Max Filippov feedback. ] Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Neeraj Upadhyay Cc: Uladzislau Rezki Cc: Joel Fernandes Cc: Boqun Feng Cc: Nicolas Saenz Julienne Cc: Marcelo Tosatti Cc: Xiongfeng Wang Cc: Yu Liao Cc: Phil Auld Cc: Paul Gortmaker Cc: Alex Belits Signed-off-by: Paul E. McKenney Reviewed-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne

context_tracking: Rename context_tracking_user_enter/exit() to user_enter/exit_callable()

2022-06-30T00:03:27Z

context_tracking_user_enter() and context_tracking_user_exit() are ASM callable versions of user_enter() and user_exit() for architectures that didn't manage to check the context tracking static key from ASM. Change those function names to better reflect their purpose. [ frederic: Apply Max Filippov feedback. ] Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Neeraj Upadhyay Cc: Uladzislau Rezki Cc: Joel Fernandes Cc: Boqun Feng Cc: Nicolas Saenz Julienne Cc: Marcelo Tosatti Cc: Xiongfeng Wang Cc: Yu Liao Cc: Phil Auld Cc: Paul Gortmaker Cc: Alex Belits Signed-off-by: Paul E. McKenney Reviewed-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne

riscv: compat: syscall: Add entry.S implementation

2022-04-26T20:36:31Z

Implement the entry of compat_sys_call_table[] in asm. Ref to riscv-privileged spec 4.1.1 Supervisor Status Register (sstatus): BIT[32:33] = UXL[1:0]: - 1:32 - 2:64 - 3:128 Signed-off-by: Guo Ren Signed-off-by: Guo Ren Reviewed-by: Palmer Dabbelt Tested-by: Heiko Stuebner Link: https://lore.kernel.org/r/20220405071314.3225832-13-guoren@kernel.org Signed-off-by: Palmer Dabbelt

Merge tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2022-03-25T17:11:38Z

Pull RISC-V updates from Palmer Dabbelt: - Support for Sv57-based virtual memory. - Various improvements for the MicroChip PolarFire SOC and the associated Icicle dev board, which should allow upstream kernels to boot without any additional modifications. - An improved memmove() implementation. - Support for the new Ssconfpmf and SBI PMU extensions, which allows for a much more useful perf implementation on RISC-V systems. - Support for restartable sequences. * tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits) rseq/selftests: Add support for RISC-V RISC-V: Add support for restartable sequence MAINTAINERS: Add entry for RISC-V PMU drivers Documentation: riscv: Remove the old documentation RISC-V: Add sscofpmf extension support RISC-V: Add perf platform driver based on SBI PMU extension RISC-V: Add RISC-V SBI PMU extension definitions RISC-V: Add a simple platform driver for RISC-V legacy perf RISC-V: Add a perf core library for pmu drivers RISC-V: Add CSR encodings for all HPMCOUNTERS RISC-V: Remove the current perf implementation RISC-V: Improve /proc/cpuinfo output for ISA extensions RISC-V: Do no continue isa string parsing without correct XLEN RISC-V: Implement multi-letter ISA extension probing framework RISC-V: Extract multi-letter extension names from "riscv, isa" RISC-V: Minimal parser for "riscv, isa" strings RISC-V: Correctly print supported extensions riscv: Fixed misaligned memory access. Fixed pointer comparison. MAINTAINERS: update riscv/microchip entry riscv: dts: microchip: add new peripherals to icicle kit device tree ...

RISC-V: Add support for restartable sequence

2022-03-22T21:45:14Z

Add calls to rseq_signal_deliver() and rseq_syscall() to introduce RSEQ support. 1. Call the rseq_signal_deliver() function to fixup on the pre-signal frame when a signal is delivered on top of a restartable sequence critical section. 2. Check that system calls are not invoked from within rseq critical sections by invoking rseq_signal() from ret_from_syscall(). With CONFIG_DEBUG_RSEQ, such behavior results in termination of the process with SIGSEGV. Signed-off-by: Vincent Chen Reviewed-by: Mathieu Desnoyers Signed-off-by: Palmer Dabbelt

riscv: fix oops caused by irqsoff latency tracer

2022-02-25T04:30:30Z

The trace_hardirqs_{on,off}() require the caller to setup frame pointer properly. This because these two functions use macro 'CALLER_ADDR1' (aka. __builtin_return_address(1)) to acquire caller info. If the $fp is used for other purpose, the code generated this macro (as below) could trigger memory access fault. 0xffffffff8011510e <+80>: ld a1,-16(s0) 0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here The oops message during booting if compiled with 'irqoff' tracer enabled: [ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 [ 0.041925][ T0] Oops [#1] [ 0.042063][ T0] Modules linked in: [ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29 [ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT) [ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2 [ 0.044601][ T0] ra : restore_all+0x12/0x6e [ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0 [ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020 [ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0 [ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100 [ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45 [ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50 [ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8 [ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000 [ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000 [ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368 [ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d [ 0.046402][ T0] [] restore_all+0x12/0x6e This because the $fp(aka. $s0) register is not used as frame pointer in the assembly entry code. resume_kernel: REG_L s0, TASK_TI_PREEMPT_COUNT(tp) bnez s0, restore_all REG_L s0, TASK_TI_FLAGS(tp) andi s0, s0, _TIF_NEED_RESCHED beqz s0, restore_all call preempt_schedule_irq j restore_all To fix above issue, here we add one extra level wrapper for function trace_hardirqs_{on,off}() so they can be safely called by low level entry code. Signed-off-by: Changbin Du Fixes: 3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt

Merge tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2021-11-02T00:00:05Z

Pull thread_info update to move 'cpu' back from task_struct from Kees Cook: "Cross-architecture update to move task_struct::cpu back into thread_info on arm64, x86, s390, powerpc, and riscv. All Acked by arch maintainers. Quoting Ard Biesheuvel: 'Move task_struct::cpu back into thread_info Keeping CPU in task_struct is problematic for architectures that define raw_smp_processor_id() in terms of this field, as it requires linux/sched.h to be included, which causes a lot of pain in terms of circular dependencies (aka 'header soup') This series moves it back into thread_info (where it came from) for all architectures that enable THREAD_INFO_IN_TASK, addressing the header soup issue as well as some pointless differences in the implementations of task_cpu() and set_task_cpu()'" * tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: riscv: rely on core code to keep thread_info::cpu updated powerpc: smp: remove hack to obtain offset of task_struct::cpu sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y powerpc: add CPU field to struct thread_info s390: add CPU field to struct thread_info x86: add CPU field to struct thread_info arm64: add CPU field to struct thread_info

irq: riscv: perform irqentry in entry code

2021-10-26T09:13:29Z

In preparation for removing HANDLE_DOMAIN_IRQ_IRQENTRY, have arch/riscv perform all the irqentry accounting in its entry code. As arch/riscv uses GENERIC_IRQ_MULTI_HANDLER, we can use generic_handle_arch_irq() to do so. Since generic_handle_arch_irq() handles the irq entry and setting the irq regs, and happens before the irqchip code calls handle_IPI(), we can remove the redundant irq entry and irq regs manipulation from handle_IPI(). There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland Reviewed-by: Guo Ren Reviewed-by: Marc Zyngier Cc: Albert Ou Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Thomas Gleixner