kernel.git/arch/riscv/boot, branch linux-6.0.y

riscv: dts: sifive unleashed: Add PWM controlled LEDs

2022-12-02T16:42:59Z

[ Upstream commit 8bc8824d30193eb7755043d5bb65fa7f0d11a595 ] This adds the 4 PWM controlled green LEDs to the HiFive Unleashed device tree. The schematic doesn't specify any special function for the LEDs, so they're added here without any default triggers and named d1, d2, d3 and d4 just like in the schematic. Signed-off-by: Emil Renner Berthing Reviewed-by: Conor Dooley Tested-by: Conor Dooley Link: https://lore.kernel.org/r/20221012110928.352910-1-emil.renner.berthing@canonical.com Signed-off-by: Palmer Dabbelt Signed-off-by: Sasha Levin

riscv: dts: microchip: use an mpfs specific l2 compatible

2022-08-31T15:57:51Z

PolarFire SoC does not have the same l2 cache controller as the fu540, featuring an extra interrupt. Appease the devicetree checker overlords by adding a PolarFire SoC specific compatible to fix the below sort of warnings: mpfs-polarberry.dtb: cache-controller@2010000: interrupts: [[1], [3], [4], [2]] is too long Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") Fixes: 34fc9cc3aebe ("riscv: dts: microchip: correct L2 cache interrupts") Reviewed-by: Heinrich Schuchardt Signed-off-by: Conor Dooley

riscv: dts: microchip: mpfs: remove pci axi address translation property

2022-08-23T21:15:55Z

An AXI master address translation table property was inadvertently added to the device tree & this was not caught by dtbs_check at the time. Remove the property - it should not be in mpfs.dtsi anyway as it would be more suitable in -fabric.dtsi nor does it actually apply to the version of the reference design we are using for upstream. Link: https://www.microsemi.com/document-portal/doc_download/1245812-polarfire-fpga-and-polarfire-soc-fpga-pci-express-user-guide # Section 1.3.3 Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree") Signed-off-by: Conor Dooley

riscv: dts: microchip: mpfs: remove bogus card-detect-delay

2022-08-23T21:15:54Z

Recent versions of dt-schema warn about a previously undetected undocumented property: arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: mmc@20008000: Unevaluated properties are not allowed ('card-detect-delay' was unexpected) From schema: Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml There are no GPIOs connected to MSSIO6B4 pin K3 so adding the common cd-debounce-delay-ms property makes no sense. The Cadence IP has a register that sets the card detect delay as "DP * tclk". On MPFS, this clock frequency is not configurable (it must be 200 MHz) & the FPGA comes out of reset with this register already set. Fixes: bc47b2217f24 ("riscv: dts: microchip: add the sundance polarberry") Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") Signed-off-by: Conor Dooley

riscv: dts: microchip: mpfs: remove ti,fifo-depth property

2022-08-23T21:15:54Z

Recent versions of dt-schema warn about a previously undetected undocument property on the icicle & polarberry devicetrees: arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: ethernet@20112000: ethernet-phy@8: Unevaluated properties are not allowed ('ti,fifo-depth' was unexpected) From schema: Documentation/devicetree/bindings/net/cdns,macb.yaml I know what you're thinking, the binding doesn't look to be the problem and I agree. I am not sure why a TI vendor property was ever actually added since it has no meaning... just get rid of it. Fixes: bc47b2217f24 ("riscv: dts: microchip: add the sundance polarberry") Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") Signed-off-by: Conor Dooley

riscv: dts: microchip: mpfs: fix incorrect pcie child node name

2022-08-23T21:15:54Z

Recent versions of dt-schema complain about the PCIe controller's child node name: arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: pcie@2000000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'legacy-interrupt-controller', 'microchip,axi-m-atr0' were unexpected) From schema: Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml Make the dts match the correct property name in the dts. Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree") Signed-off-by: Conor Dooley

riscv: dts: microchip: correct L2 cache interrupts

2022-08-17T17:39:19Z

The "PolarFire SoC MSS Technical Reference Manual" documents the following PLIC interrupts: 1 - L2 Cache Controller Signals when a metadata correction event occurs 2 - L2 Cache Controller Signals when an uncorrectable metadata event occurs 3 - L2 Cache Controller Signals when a data correction event occurs 4 - L2 Cache Controller Signals when an uncorrectable data event occurs This differs from the SiFive FU540 which only has three L2 cache related interrupts. The sequence in the device tree is defined by an enum: enum { DIR_CORR = 0, DATA_CORR, DATA_UNCORR, DIR_UNCORR, }; So the correct sequence of the L2 cache interrupts is interrupts = <1>, <3>, <4>, <2>; [Conor] This manifests as an unusable system if the l2-cache driver is enabled, as the wrong interrupt gets cleared & the handler prints errors to the console ad infinitum. Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") CC: stable@vger.kernel.org # 5.15: e35b07a7df9b: riscv: dts: microchip: mpfs: Group tuples in interrupt properties Signed-off-by: Heinrich Schuchardt Signed-off-by: Conor Dooley

riscv: dts: starfive: correct number of external interrupts

2022-08-11T18:40:37Z

The PLIC integrated on the Vic_U7_Core integrated on the StarFive JH7100 SoC actually supports 133 external interrupts. 127 of these are exposed to the outside world; the remainder are used by other devices that are part of the core-complex such as the L2 cache controller. But all 133 interrupts are external interrupts as far as the PLIC is concerned. Fix the property so that the driver can manage these additional interrupts, which is important since the interrupts for the L2 cache controller are enabled by default. Fixes: ec85362fb121 ("RISC-V: Add initial StarFive JH7100 device tree") Signed-off-by: Mark Kettenis Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220707185529.19509-1-kettenis@openbsd.org Signed-off-by: Palmer Dabbelt

riscv: dts: sifive unmatched: Add PWM controlled LEDs

2022-08-11T18:34:57Z

This adds the two PWM controlled LEDs to the HiFive Unmatched device tree. D12 is just a regular green diode, but D2 is an RGB diode with 3 PWM inputs controlling the three different colours. Signed-off-by: Emil Renner Berthing Reviewed-by: Geert Uytterhoeven Acked-by: Pavel Machek Tested-by: Ron Economos Link: https://lore.kernel.org/r/20220705210143.315151-5-emil.renner.berthing@canonical.com Signed-off-by: Palmer Dabbelt

RISC-V: Canaan devicetree fixes

2022-08-10T21:43:14Z

This series should rid us of dtbs_check errors for the RISC-V Canaan k210 based boards. To make keeping it that way a little easier, I changed the Canaan devicetree Makefile so that it would build all of the devicetrees in the directory if SOC_CANAAN. Link: https://lore.kernel.org/all/mhng-85044754-c361-40bc-a6a2-7082f35930bb@palmer-ri-x1c9/ * remotes/palmer/riscv-canaan_dt_schema: riscv: dts: canaan: build all devicetress if SOC_CANAAN riscv: dts: canaan: add specific compatible for kd233's LCD riscv: dts: canaan: fix bus {ranges,reg} warnings riscv: dts: canaan: remove spi-max-frequency from controllers riscv: dts: canaan: use custom compatible for k210 i2s riscv: dts: canaan: fix kd233 display spi frequency riscv: dts: canaan: fix mmc node names riscv: dts: canaan: fix the k210's timer nodes riscv: dts: canaan: fix the k210's memory node dt-bindings: memory-controllers: add canaan k210 sram controller dt-bindings: display: ili9341: document canaan kd233's lcd dt-bindings: display: convert ilitek,ili9341.txt to dt-schema