kernel.git/arch/riscv/Kconfig, branch linux-5.7.y

riscv: Make SYS_SUPPORTS_HUGETLBFS depends on MMU

2020-05-13T00:41:24Z

HUGETLBFS only used when MMU enabled, add the dependency. Reported-by: Hulk Robot Signed-off-by: Kefeng Wang Signed-off-by: Palmer Dabbelt

riscv: Disable ARCH_HAS_DEBUG_VIRTUAL if NOMMU

2020-05-13T00:22:03Z

DEBUG_VIRTUAL should only used when MMU enabled, add the dependence. Signed-off-by: Kefeng Wang Signed-off-by: Palmer Dabbelt

riscv: select ARCH_HAS_STRICT_KERNEL_RWX only if MMU

2020-04-24T18:40:40Z

ARCH_HAS_STRICT_KERNEL_RWX is not useful for NO-MMU systems. Furthermore, has this option leads to very large boot image files on 64bits architectures, do not enable this option to allow supporting no-mmu platforms such as the Kendryte K210 SoC based boards. Fixes: 00cb41d5ad31 ("riscv: add alignment for text, rodata and data sections") Signed-off-by: Damien Le Moal Reviewed-by: Anup Patel Reviewed-by: Wladimir J. van der Laan Signed-off-by: Palmer Dabbelt

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-04-16T21:52:29Z

Pull networking fixes from David Miller: 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel. 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet. 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing. 4) Adjust icmp6 message source address selection when routes have a preferred source address set, from Tim Stallard. 5) Be sure to validate HSR protocol version when creating new links, from Taehee Yoo. 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in non-initial namespaces, from Michael Weiß. 7) Missing release firmware call in mlx5, from Eran Ben Elisha. 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from Taehee Yoo. 9) Fix pause frame negotiation in marvell phy driver, from Clemens Gruber. 10) Record RX queue early enough in tun packet paths such that XDP programs will see the correct RX queue index, from Gilberto Bertin. 11) Fix double unlock in mptcp, from Florian Westphal. 12) Fix offset overflow in ARM bpf JIT, from Luke Nelson. 13) marvell10g needs to soft reset PHY when coming out of low power mode, from Russell King. 14) Fix MTU setting regression in stmmac for some chip types, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) amd-xgbe: Use __napi_schedule() in BH context mISDN: make dmril and dmrim static net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode tipc: fix incorrect increasing of link window Documentation: Fix tcp_challenge_ack_limit default value net: tulip: make early_486_chipsets static dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400 ipv6: remove redundant assignment to variable err net/rds: Use ERR_PTR for rds_message_alloc_sgs() net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge selftests/bpf: Check for correct program attach/detach in xdp_attach test libbpf: Fix type of old_fd in bpf_xdp_set_link_opts libbpf: Always specify expected_attach_type on program load if supported xsk: Add missing check on user supplied headroom size mac80211: fix channel switch trigger from unknown mesh peer mac80211: fix race in ieee80211_register_hw() net: marvell10g: soft-reset the PHY when coming out of low power net: marvell10g: report firmware version net/cxgb4: Check the return from t4_query_params properly ...

Merge tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2020-04-09T17:51:30Z

Pull RISC-V updates from Palmer Dabbelt: "This contains a handful of new features: - Partial support for the Kendryte K210. There are still a few outstanding issues that I have patches for, but I don't actually have a board to test them so they're not included yet. - SBI v0.2 support. - Fixes to support for building with LLVM-based toolchains. The resulting images are known not to boot yet. I don't anticipate a part two, but I'll probably have something early in the RCs to finish up the K210 support" * tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits) riscv: create a loader.bin boot image for Kendryte SoC riscv: Kendryte K210 default config riscv: Add Kendryte K210 device tree riscv: Select required drivers for Kendryte SOC riscv: Add Kendryte K210 SoC support riscv: Add SOC early init support riscv: Unaligned load/store handling for M_MODE RISC-V: Support cpu hotplug RISC-V: Add supported for ordered booting method using HSM RISC-V: Add SBI HSM extension definitions RISC-V: Export SBI error to linux error mapping function RISC-V: Add cpu_ops and modify default booting method RISC-V: Move relocate and few other functions out of __init RISC-V: Implement new SBI v0.2 extensions RISC-V: Introduce a new config for SBI v0.1 RISC-V: Add SBI v0.2 extension definitions RISC-V: Add basic support for SBI v0.2 RISC-V: Mark existing SBI as 0.1 SBI. riscv: Use macro definition instead of magic number riscv: Add support to dump the kernel page tables ...

riscv, bpf: Remove BPF JIT for nommu builds

2020-04-02T22:33:42Z

The BPF JIT fails to build for kernels configured to !MMU. Without an MMU, the BPF JIT does not make much sense, therefore this patch disables the JIT for nommu builds. This was reported by the kbuild test robot: All errors (new ones prefixed by >>): arch/riscv/net/bpf_jit_comp64.c: In function 'bpf_jit_alloc_exec': >> arch/riscv/net/bpf_jit_comp64.c:1094:47: error: 'BPF_JIT_REGION_START' undeclared (first use in this function) 1094 | return __vmalloc_node_range(size, PAGE_SIZE, BPF_JIT_REGION_START, | ^~~~~~~~~~~~~~~~~~~~ arch/riscv/net/bpf_jit_comp64.c:1094:47: note: each undeclared identifier is reported only once for each function it appears in >> arch/riscv/net/bpf_jit_comp64.c:1095:9: error: 'BPF_JIT_REGION_END' undeclared (first use in this function) 1095 | BPF_JIT_REGION_END, GFP_KERNEL, | ^~~~~~~~~~~~~~~~~~ arch/riscv/net/bpf_jit_comp64.c:1098:1: warning: control reaches end of non-void function [-Wreturn-type] 1098 | } | ^ Reported-by: kbuild test robot Signed-off-by: Björn Töpel Signed-off-by: Daniel Borkmann Acked-by: Luke Nelson Link: https://lore.kernel.org/bpf/20200331101046.23252-1-bjorn.topel@gmail.com

RISC-V: Support cpu hotplug

2020-03-31T18:28:30Z

This patch enable support for cpu hotplug in RISC-V. It uses SBI HSM extension to online/offline any hart. As a result, the harts are returned to firmware once they are offline. If the harts are brought online afterwards, they re-enter Linux kernel as if a secondary hart booted for the first time. All booting requirements are honored during this process. Tested both on QEMU and HighFive Unleashed board with. Test result follows. --------------------------------------------------- Offline cpu 2 --------------------------------------------------- $ echo 0 > /sys/devices/system/cpu/cpu2/online [ 32.828684] CPU2: off $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 --------------------------------------------------- online cpu 2 --------------------------------------------------- $ echo 1 > /sys/devices/system/cpu/cpu2/online $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 2 hart : 2 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 Signed-off-by: Atish Patra Reviewed-by: Anup Patel

RISC-V: Introduce a new config for SBI v0.1

2020-03-31T18:25:40Z

We now have SBI v0.2 which is more scalable and extendable to handle future needs for RISC-V supervisor interfaces. Introduce a new config and move all SBI v0.1 code under that config. This allows to implement the new replacement SBI extensions cleanly and remove v0.1 extensions easily in future. Currently, the config is enabled by default. Once all M-mode software, with v0.1, is no longer in use, this config option and all relevant code can be easily removed. Signed-off-by: Atish Patra Reviewed-by: Anup Patel Signed-off-by: Palmer Dabbelt

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2020-03-30T04:25:29Z

Minor comment conflict in mac80211. Signed-off-by: David S. Miller

riscv: Add support to dump the kernel page tables

2020-03-26T16:29:49Z

In a similar manner to arm64, x86, powerpc, etc., it can traverse all page tables, and dump the page table layout with the memory types and permissions. Add a debugfs file at /sys/kernel/debug/kernel_page_tables to export the page table layout to userspace. Signed-off-by: Zong Li Tested-by: Alexandre Ghiti Signed-off-by: Palmer Dabbelt