kernel.git/arch/powerpc/sysdev, branch linux-2.6.34.y

rapidio: fix hang on RapidIO doorbell queue full condition

2011-06-26T16:46:29Z

commit 12a4dc43911785f51a596f771ae0701b18d436f1 upstream. In fsl_rio_dbell_handler() the code currently simply acknowledges the QFI queue full interrupt, but does nothing to resolve the queue full condition. Instead, it jumps to the end of the isr. When a queue full condition occurs, the isr is then re-entered immediately and continually, forever. The fix is to just fall through and read out current doorbell entries. Signed-off-by: Thomas Taranowski Cc: Alexandre Bounine Cc: Kumar Gala Cc: Matt Porter Cc: Li Yang Cc: Thomas Moll Cc: Micha Nelissen Cc: Benjamin Herrenschmidt Cc: Grant Likely Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Paul Gortmaker

powerpc/cpm1: Fix build with various CONFIG_*_UCODE_PATCH combinations

2010-08-02T17:29:50Z

commit 2069a6ae19a34d96cc9cb284eb645b165138e03f upstream. Warnings are treated as errors for arch/powerpc code, so build fails with CONFIG_I2C_SPI_UCODE_PATCH=y: CC arch/powerpc/sysdev/micropatch.o cc1: warnings being treated as errors arch/powerpc/sysdev/micropatch.c: In function 'cpm_load_patch': arch/powerpc/sysdev/micropatch.c:630: warning: unused variable 'smp' make[1]: *** [arch/powerpc/sysdev/micropatch.o] Error 1 And with CONFIG_USB_SOF_UCODE_PATCH=y: CC arch/powerpc/sysdev/micropatch.o cc1: warnings being treated as errors arch/powerpc/sysdev/micropatch.c: In function 'cpm_load_patch': arch/powerpc/sysdev/micropatch.c:629: warning: unused variable 'spp' arch/powerpc/sysdev/micropatch.c:628: warning: unused variable 'iip' make[1]: *** [arch/powerpc/sysdev/micropatch.o] Error 1 This patch fixes these issues by introducing proper #ifdefs. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala Signed-off-by: Greg Kroah-Hartman

powerpc/cpm: Reintroduce global spi_pram struct (fixes build issue)

2010-08-02T17:29:50Z

commit 56825c88ff438f4dbb51a44591cc29e707fe783a upstream. spi_t was removed in commit 644b2a680ccc51a9ec4d6beb12e9d47d2dee98e2 ("powerpc/cpm: Remove SPI defines and spi structs"), the commit assumed that spi_t isn't used anywhere outside of the spi_mpc8xxx driver. But it appears that the struct is needed for micropatch code. So, let's reintroduce the struct. Fixes the following build issue: CC arch/powerpc/sysdev/micropatch.o micropatch.c: In function 'cpm_load_patch': micropatch.c:629: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token micropatch.c:629: error: 'spp' undeclared (first use in this function) micropatch.c:629: error: (Each undeclared identifier is reported only once micropatch.c:629: error: for each function it appears in.) Reported-by: LEROY Christophe Reported-by: Tony Breeds Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala Signed-off-by: Greg Kroah-Hartman

powerpc/fsl-cpm: Configure clock correctly for SCC

2010-04-20T04:13:03Z

Some board setup functions call cpm1_clk_setup() or cmp2_clk_setup() to configure the clock source. If CPM_CLK_RTX has been used for the parameter mode, the clock has been configured only for TX but not for RX. With this patch CPM_CLK_RTX configures the clock for both directions correctly. Signed-off-by: Wolfgang Ocker Acked-by: Scott Wood Signed-off-by: Kumar Gala

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

powerpc/cpm2: Checkpatch cleanup

2010-03-04T16:43:58Z

arch/powerpc/sysdev/cpm2_pic.h:6: ERROR: "(foo*)" should be "(foo *)" Signed-off-by: Andrea Gelmini Signed-off-by: Kumar Gala

powerpc/qe: Convert qe_ic_lock to raw_spinlock

2010-03-04T16:42:58Z

Interrupt controllers' hooks are executed in the atomic context, so they are not permitted to sleep (with RT kernels non-raw spinlocks are sleepable). So, qe_ic_lock has to be a real (non-sleepable) spinlock. Signed-off-by: Anton Vorontsov Acked-by: Thomas Gleixner Signed-off-by: Kumar Gala

Merge commit 'origin/master' into next

2010-02-26T03:41:00Z

Manual merge of: drivers/char/hvc_console.c drivers/char/hvc_console.h

Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6

2010-02-25T23:38:37Z

* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (41 commits) of: remove undefined request_OF_resource & release_OF_resource of/sparc: Remove sparc-local declaration of allnodes and devtree_lock of: move definition of of_chosen into common code. of: remove unused extern reference to devtree_lock of: put default string compare and #a/s-cell values into common header of/flattree: Don't assume HAVE_LMB of: protect linux/of.h with CONFIG_OF proc_devtree: fix THIS_MODULE without module.h of: Remove old and misplaced function declarations of/flattree: Make the kernel accept ePAPR style phandle information of/flattree: endian-convert members of boot_param_header of: assume big-endian properties, adding conversions where necessary of: use __be32 for cell value accessors of/flattree: use OF_ROOT_NODE_{SIZE,ADDR}_CELLS DEFAULT for fdt parsing of/flattree: use callback to setup initrd from /chosen proc_devtree: include linux/of.h of: make set_node_proc_entry private to proc_devtree.c of: include linux/proc_fs.h of/flattree: merge early_init_dt_scan_memory() common code of: add 'of_' prefix to machine_is_compatible() ...

powerpc: Convert mpic locks to raw_spinlock

2010-02-19T03:52:32Z

mpic_lock, irq_rover_lock and fixup_lock need to be real spinlocks in RT. Convert them to raw_spinlock. Signed-off-by: Thomas Gleixner Signed-off-by: Benjamin Herrenschmidt