kernel.git/arch/powerpc/sysdev/xive/common.c, branch linux-4.14.y

powerpc/xive: Clear the page tables for the ESB IO mapping

2020-06-20T08:24:59Z

[ Upstream commit a101950fcb78b0ba20cd487be6627dea58d55c2b ] Commit 1ca3dec2b2df ("powerpc/xive: Prevent page fault issues in the machine crash handler") fixed an issue in the FW assisted dump of machines using hash MMU and the XIVE interrupt mode under the POWER hypervisor. It forced the mapping of the ESB page of interrupts being mapped in the Linux IRQ number space to make sure the 'crash kexec' sequence worked during such an event. But it didn't handle the un-mapping. This mapping is now blocking the removal of a passthrough IO adapter under the POWER hypervisor because it expects the guest OS to have cleared all page table entries related to the adapter. If some are still present, the RTAS call which isolates the PCI slot returns error 9001 "valid outstanding translations". Remove these mapping in the IRQ data cleanup routine. Under KVM, this cleanup is not required because the ESB pages for the adapter interrupts are un-mapped from the guest by the hypervisor in the KVM XIVE native device. This is now redundant but it's harmless. Fixes: 1ca3dec2b2df ("powerpc/xive: Prevent page fault issues in the machine crash handler") Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Cédric Le Goater Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200429075122.1216388-2-clg@kaod.org Signed-off-by: Sasha Levin

powerpc/xive: Use XIVE_BAD_IRQ instead of zero to catch non configured IPIs

2020-04-24T06:00:46Z

commit b1a504a6500df50e83b701b7946b34fce27ad8a3 upstream. When a CPU is brought up, an IPI number is allocated and recorded under the XIVE CPU structure. Invalid IPI numbers are tracked with interrupt number 0x0. On the PowerNV platform, the interrupt number space starts at 0x10 and this works fine. However, on the sPAPR platform, it is possible to allocate the interrupt number 0x0 and this raises an issue when CPU 0 is unplugged. The XIVE spapr driver tracks allocated interrupt numbers in a bitmask and it is not correctly updated when interrupt number 0x0 is freed. It stays allocated and it is then impossible to reallocate. Fix by using the XIVE_BAD_IRQ value instead of zero on both platforms. Reported-by: David Gibson Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Cédric Le Goater Reviewed-by: David Gibson Tested-by: David Gibson Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200306150143.5551-2-clg@kaod.org Signed-off-by: Greg Kroah-Hartman

powerpc/xive: Prevent page fault issues in the machine crash handler

2019-12-17T19:39:41Z

commit 1ca3dec2b2dff9d286ce6cd64108bda0e98f9710 upstream. When the machine crash handler is invoked, all interrupts are masked but interrupts which have not been started yet do not have an ESB page mapped in the Linux address space. This crashes the 'crash kexec' sequence on sPAPR guests. To fix, force the mapping of the ESB page when an interrupt is being mapped in the Linux IRQ number space. This is done by setting the initial state of the interrupt to OFF which is not necessarily the case on PowerNV. Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Cédric Le Goater Reviewed-by: Greg Kurz Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20191031063100.3864-1-clg@kaod.org Signed-off-by: Greg Kroah-Hartman

powerpc/xive: Move a dereference below a NULL test

2019-11-24T07:23:01Z

[ Upstream commit cd5ff94577e004e0a4457e70d0ef3a030f4010b8 ] Move the dereference of xc below the NULL test. Signed-off-by: zhong jiang Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin

powerpc/xive: Fix loop exit-condition in xive_find_target_in_mask()

2019-07-31T05:28:58Z

commit 4d202c8c8ed3822327285747db1765967110b274 upstream. xive_find_target_in_mask() has the following for(;;) loop which has a bug when @first == cpumask_first(@mask) and condition 1 fails to hold for every CPU in @mask. In this case we loop forever in the for-loop. first = cpu; for (;;) { if (cpu_online(cpu) && xive_try_pick_target(cpu)) // condition 1 return cpu; cpu = cpumask_next(cpu, mask); if (cpu == first) // condition 2 break; if (cpu >= nr_cpu_ids) // condition 3 cpu = cpumask_first(mask); } This is because, when @first == cpumask_first(@mask), we never hit the condition 2 (cpu == first) since prior to this check, we would have executed "cpu = cpumask_next(cpu, mask)" which will set the value of @cpu to a value greater than @first or to nr_cpus_ids. When this is coupled with the fact that condition 1 is not met, we will never exit this loop. This was discovered by the hard-lockup detector while running LTP test concurrently with SMT switch tests. watchdog: CPU 12 detected hard LOCKUP on other CPUs 68 watchdog: CPU 12 TB:85587019220796, last SMP heartbeat TB:85578827223399 (15999ms ago) watchdog: CPU 68 Hard LOCKUP watchdog: CPU 68 TB:85587019361273, last heartbeat TB:85576815065016 (19930ms ago) CPU: 68 PID: 45050 Comm: hxediag Kdump: loaded Not tainted 4.18.0-100.el8.ppc64le #1 NIP: c0000000006f5578 LR: c000000000cba9ec CTR: 0000000000000000 REGS: c000201fff3c7d80 TRAP: 0100 Not tainted (4.18.0-100.el8.ppc64le) MSR: 9000000002883033 CR: 24028424 XER: 00000000 CFAR: c0000000006f558c IRQMASK: 1 GPR00: c0000000000afc58 c000201c01c43400 c0000000015ce500 c000201cae26ec18 GPR04: 0000000000000800 0000000000000540 0000000000000800 00000000000000f8 GPR08: 0000000000000020 00000000000000a8 0000000080000000 c00800001a1beed8 GPR12: c0000000000b1410 c000201fff7f4c00 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000540 0000000000000001 GPR20: 0000000000000048 0000000010110000 c00800001a1e3780 c000201cae26ed18 GPR24: 0000000000000000 c000201cae26ed8c 0000000000000001 c000000001116bc0 GPR28: c000000001601ee8 c000000001602494 c000201cae26ec18 000000000000001f NIP [c0000000006f5578] find_next_bit+0x38/0x90 LR [c000000000cba9ec] cpumask_next+0x2c/0x50 Call Trace: [c000201c01c43400] [c000201cae26ec18] 0xc000201cae26ec18 (unreliable) [c000201c01c43420] [c0000000000afc58] xive_find_target_in_mask+0x1b8/0x240 [c000201c01c43470] [c0000000000b0228] xive_pick_irq_target.isra.3+0x168/0x1f0 [c000201c01c435c0] [c0000000000b1470] xive_irq_startup+0x60/0x260 [c000201c01c43640] [c0000000001d8328] __irq_startup+0x58/0xf0 [c000201c01c43670] [c0000000001d844c] irq_startup+0x8c/0x1a0 [c000201c01c436b0] [c0000000001d57b0] __setup_irq+0x9f0/0xa90 [c000201c01c43760] [c0000000001d5aa0] request_threaded_irq+0x140/0x220 [c000201c01c437d0] [c00800001a17b3d4] bnx2x_nic_load+0x188c/0x3040 [bnx2x] [c000201c01c43950] [c00800001a187c44] bnx2x_self_test+0x1fc/0x1f70 [bnx2x] [c000201c01c43a90] [c000000000adc748] dev_ethtool+0x11d8/0x2cb0 [c000201c01c43b60] [c000000000b0b61c] dev_ioctl+0x5ac/0xa50 [c000201c01c43bf0] [c000000000a8d4ec] sock_do_ioctl+0xbc/0x1b0 [c000201c01c43c60] [c000000000a8dfb8] sock_ioctl+0x258/0x4f0 [c000201c01c43d20] [c0000000004c9704] do_vfs_ioctl+0xd4/0xa70 [c000201c01c43de0] [c0000000004ca274] sys_ioctl+0xc4/0x160 [c000201c01c43e30] [c00000000000b388] system_call+0x5c/0x70 Instruction dump: 78aad182 54a806be 3920ffff 78a50664 794a1f24 7d294036 7d43502a 7d295039 4182001c 48000034 78a9d182 79291f24 <7d23482a> 2fa90000 409e0020 38a50040 To fix this, move the check for condition 2 after the check for condition 3, so that we are able to break out of the loop soon after iterating through all the CPUs in the @mask in the problem case. Use do..while() to achieve this. Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Reported-by: Indira P. Joga Signed-off-by: Gautham R. Shenoy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1563359724-13931-1-git-send-email-ego@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman

powerpc/xive: Clear XIVE internal structures when a CPU is removed

2017-10-04T11:01:57Z

Commit eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller") introduced support for the XIVE exploitation mode of the P9 interrupt controller on the pseries platform. At that time, support for CPU removal was not complete on PowerVM and CPU hot unplug remained untested. It appears that some cleanups of the XIVE internal structures are required before releasing the CPU, without which the kernel crashes in a RTAS call doing the CPU isolation. These changes fix the crash by deconfiguring the IPI interrupt source and clearing the event queues of the CPU when it is removed. Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Signed-off-by: Cédric Le Goater Signed-off-by: Michael Ellerman

powerpc/xive: improve debugging macros

2017-09-02T11:02:38Z

Having the CPU identifier in the debug logs is helpful when tracking issues. Also add some more logging and fix a compile issue in xive_do_source_eoi(). Signed-off-by: Cédric Le Goater Acked-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman

powerpc/xive: introduce H_INT_ESB hcall

2017-09-02T11:02:37Z

The H_INT_ESB hcall() is used to issue a load or store to the ESB page instead of using the MMIO pages. This can be used as a workaround on some HW issues. The OS knows that this hcall should be used on an interrupt source when the ESB hcall flag is set to 1 in the hcall H_INT_GET_SOURCE_INFO. To maintain the frontier between the xive frontend and backend, we introduce a new xive operation 'esb_rw' to be used in the routines doing memory accesses on the ESBs. Signed-off-by: Cédric Le Goater Acked-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman

powerpc/xive: introduce xive_esb_write()

2017-09-02T11:02:36Z

Some source support MMIO stores on the ESB page to perform EOI. Let's introduce a specific routine for this case even if this should be the only use of it. Signed-off-by: Cédric Le Goater Reviewed-by: David Gibson Acked-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman

powerpc/xive: rename xive_poke_esb() in xive_esb_read()

2017-09-02T11:02:36Z

xive_poke_esb() is performing a load/read so it is better named as xive_esb_read() as we will need to introduce a xive_esb_write() routine. Also use the XIVE_ESB_LOAD_EOI offset when EOI'ing LSI interrupts. Signed-off-by: Cédric Le Goater Reviewed-by: David Gibson Acked-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman