kernel.git/arch/powerpc/sysdev/qe_lib/ucc.c, branch linux-2.6.32.y

powerpc/qe: Move cmxgcr_lock definition from the ucc.c into the qe.c

2008-12-03T16:47:36Z

With this patch we can compile the qe_lib/usb.c without the UCC support (that is, without UCC_GETH and/or SERIAL_QE). Fixes following link error (CONFIG_SMP should be =y to trigger this): arch/powerpc/sysdev/built-in.o: In function `qe_usb_clock_set': (.text+0x3cae): undefined reference to `cmxgcr_lock' make: *** [.tmp_vmlinux1] Error 1 While at it, also add missing spinlock.h includes. Signed-off-by: Anton Vorontsov Acked-By: Timur Tabi Signed-off-by: Kumar Gala

powerpc: Fix a bunch of sparse warnings in the qe_lib

2008-07-16T22:57:45Z

Mostly having to do with not marking things __iomem. And some failure to use appropriate accessors to read MMIO regs. Signed-off-by: Andy Fleming Signed-off-by: Kumar Gala

powerpc/QE: add support for QE USB clocks routing

2008-06-10T15:39:13Z

This patch adds a function to the qe_lib to setup QE USB clocks routing. To setup clocks safely, cmxgcr register needs locking, so I just reused ucc_lock since it was used only to protect cmxgcr. The idea behind placing clocks routing functions into the qe_lib is that later we'll hopefully switch to the generic Linux Clock API, thus, for example, FHCI driver may be used for QE and CPM chips without nasty #ifdefs. This patch also fixes QE_USB_RESTART_TX command definition in the qe.h. Signed-off-by: Anton Vorontsov Acked-By: Timur Tabi Signed-off-by: Kumar Gala

[POWERPC] qe: miscellaneous code improvements and fixes to the QE library

2007-10-08T13:38:15Z

This patch makes numerous miscellaneous code improvements to the QE library. 1. Remove struct ucc_common and merge ucc_init_guemr() into ucc_set_type() (every caller of ucc_init_guemr() also calls ucc_set_type()). Modify all callers of ucc_set_type() accordingly. 2. Remove the unused enum ucc_pram_initial_offset. 3. Refactor qe_setbrg(), also implement work-around for errata QE_General4. 4. Several printk() calls were missing the terminating \n. 5. Add __iomem where needed, and change u16 to __be16 and u32 to __be32 where appropriate. 6. In ucc_slow_init() the RBASE and TBASE registers in the PRAM were programmed with the wrong value. 7. Add the protocol type to struct us_info and updated ucc_slow_init() to use it, instead of always programming QE_CR_PROTOCOL_UNSPECIFIED. 8. Rename ucc_slow_restart_x() to ucc_slow_restart_tx() 9. Add several macros in qe.h (mostly for slow UCC support, but also to standardize some naming convention) and remove several unused macros. 10. Update ucc_geth.c to use the new macros. 11. Add ucc_slow_info.protocol to specify which QE_CR_PROTOCOL_xxx protcol to use when initializing the UCC in ucc_slow_init(). 12. Rename ucc_slow_pram.rfcr to rbmr and ucc_slow_pram.tfcr to tbmr, since these are the real names of the registers. 13. Use the setbits, clrbits, and clrsetbits where appropriate. 14. Refactor ucc_set_qe_mux_rxtx(). 15. Remove all instances of 'volatile'. 16. Simplify get_cmxucr_reg(); 17. Replace qe_mux.cmxucrX with qe_mux.cmxucr[]. 18. Updated struct ucc_geth because struct ucc_fast is not padded any more. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala

[POWERPC] qe_lib: export symbols for QE driver to compile as module

2007-07-03T07:04:51Z

Export symbols of qe_lib to be used by QE driver. Signed-off-by: Li Yang Signed-off-by: Selvamuthukumar V Signed-off-by: Kumar Gala

[POWERPC] Fix the UCC rx/tx clock of QE

2006-10-25T03:49:22Z

MPC8323EMDS board ethernet interface with RMII uses the CLK16 divisor for the rx and tx clock, but the ucc_set_qe_mux_rxtx() function doesn't handle the CLK16 setting of the CMXUCR3 and CMXUCR4 registers. This fixes it. Signed-off-by: Dave Liu Signed-off-by: Paul Mackerras

[POWERPC] Add QUICC Engine (QE) infrastructure

2006-10-04T05:24:27Z

Add QUICC Engine (QE) configuration, header files, and QE management and library code that are used by QE devices drivers. Includes Leo's modifications up to, and including, the platform_device to of_device adaptation: "The series of patches add generic QE infrastructure called qe_lib, and MPC8360EMDS board support. Qe_lib is used by QE device drivers such as ucc_geth driver. This version updates QE interrupt controller to use new irq mapping mechanism, addresses all the comments received with last submission and includes some style fixes. v2: Change to use device tree for BCSR and MURAM; Remove I/O port interrupt handling code as it is not generic enough. v3: Address comments from Kumar; Update definition of several device tree nodes; Copyright style change." In addition, the following changes have been made: o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o fixed qe_snums_init() serial num assignment to use a const array o made CONFIG_UCC_FAST select UCC_SLOW o reduced NR_QE_IC_INTS from 128 to 64 o remove _IO_BASE, etc. defines (not used) o removed irrelevant comments, added others to resemble removed BD_ defines o realigned struct definitions in headers o various other style fixes including things like pinMask -> pin_mask o fixed a ton of whitespace issues o marked ioregs as __be32/__be16 o removed platform_device code and redundant get_qe_base() o removed redundant comments o added cpu_relax() to qe_reset o uncasted all get_property() assignments o eliminated unneeded casts o eliminated immrbar_phys_to_virt (not used) Signed-off-by: Li Yang Signed-off-by: Shlomi Gridish Signed-off-by: Kim Phillips Signed-off-by: Paul Mackerras