kernel.git/arch/powerpc/sysdev/Makefile, branch linux-2.6.21.y

[POWERPC] Add PMI driver for cell blade

2007-02-16T03:00:19Z

This adds driver code for the PMI device found in future IBM products. PMI stands for "Platform Management Interrupt" and is a way to communicate with the BMC (Baseboard Management Controller). It provides bidirectional communication with a low latency. Signed-off-by: Christian Krafft Acked-by: Arnd Bergmann Acked-by: Heiko J Schick Signed-off-by: Paul Mackerras

[POWERPC] 8xx: powerpc port of core CPM PIC

2007-02-07T03:03:17Z

This covers common CPM access functions, CPM interrupt controller code, micropatch and a few compatibility things to kee the same driver base working with arch/ppc. This version is refined with all the comments (mostly PIC-related) addressed. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras

[POWERPC] Don't include powerpc/sysdev/rom.o for arch/ppc builds

2007-01-09T06:03:02Z

sysdev/rom.c is for arch/powerpc only. Don't compile it when building an arch/ppc kernel. Signed-off-by: Grant Likely Acked-by: Sylvain Munaut Signed-off-by: Paul Mackerras

[POWERPC] Only export mtdcr/mfdcr if CONFIG_PPC_DCR is set

2006-12-11T05:15:47Z

On 85xx we don't build in dcr support because the core doesn't implement the instructions. This caused problems when building an 85xx kernel. Additionally made it so we only build __mtdcr/__mfdcr if we are CONFIG_PPC_DCR_NATIVE. The 85xx build issue wasPointed out by Dai Haruki. Signed-off-by: Kumar Gala

[POWERPC] Move MPC52xx PIC driver into arch/powerpc/platforms/52xx

2006-12-04T09:41:36Z

No other chips use this device, it belongs in a 52xx-specific path. Signed-off-by: Grant Likely Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras

[POWERPC] Add of_platform support for ROM devices

2006-12-04T09:41:24Z

This adds support for flash device descriptions to the OF device tree. It's inspired by and partially borrowed from Sergei's patch "[RFC] Adding MTD to device tree.patch". Signed-off-by: Vitaly Wool Signed-off-by: Sergei Shtylyov Signed-off-by: Paul Mackerras

[POWERPC] Don't compile arch/powerpc mpc52xx_pic driver for ARCH=ppc

2006-12-04T09:39:37Z

arch/powerpc/sysdev/mpc52xx_pic.c breaks the ppc build Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras

[POWERPC] Generic DCR infrastructure

2006-12-04T05:08:25Z

This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that can be used by drivers to transparently address either native DCRs or memory mapped DCRs. The implementation for memory mapped DCRs is done after the binding being currently worked on for SLOF and the Axon chipset. This patch enables it for the cell native platform Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras

[PATCH] Add MPC5200 Interrupt Controller support.

2006-11-13T03:45:02Z

This adds support for the MPC52xx Interrupt controller for ARCH=powerpc. It includes the main code in arch/powerpc/sysdev/ as well as a header file in include/asm-powerpc. Signed-off-by: Nicolas DET Acked-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras

[POWERPC] Remove todc code from ARCH=powerpc

2006-10-16T06:32:30Z

Apparently we've copied the todc drivers, for various RTCs used in embedded machines from ARCH=ppc to ARCH=powerpc, despite the fact that it's never used in the latter. This patch removes it. If we ever need these drivers (which we probably shouldn't now the RTC class stuff is in), we can transfer them one by one from ARCH=ppc, removing from the hideous abomination which is the todc "infrastructure". Signed-off-by: David Gibson Signed-off-by: Paul Mackerras