kernel.git/arch/powerpc/platforms, branch linux-3.19.y

powerpc/cell: Fix cell iommu after it_page_shift changes

2015-05-06T20:01:57Z

commit 7261b956b276aa97fbf60d00f1d7717d2ea6ee78 upstream. The patch to add it_page_shift incorrectly changed the increment of uaddr to use it_page_shift, rather then (1 << it_page_shift). This broke booting on at least some Cell blades, as the iommu was basically non-functional. Fixes: 3a553170d35d ("powerpc/iommu: Add it_page_shift field to determine iommu page size") Signed-off-by: Michael Ellerman Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/cell: Fix crash in iic_setup_cpu() after per_cpu changes

2015-05-06T20:01:57Z

commit b0dd00addc5035f87ec9c5820dacc1ebc7fcb3e6 upstream. The conversion from __get_cpu_var() to this_cpu_ptr() in iic_setup_cpu() is wrong. It causes an oops at boot. We need the per-cpu address of struct cpu_iic, not cpu_iic.regs->prio. Sparse noticed this, because we pass a non-iomem pointer to out_be64(), but we obviously don't check the sparse results often enough. Fixes: 69111bac42f5 ("powerpc: Replace __get_cpu_var uses") Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/powernv: Don't map M64 segments using M32DT

2015-05-06T20:01:57Z

commit 027fa02f84e851e21daffdf8900d6117071890f8 upstream. If M64 has been supported, the prefetchable 64-bits memory resources shouldn't be mapped to the corresponding PE# via M32DT. Unfortunately, we're doing that in pnv_ioda_setup_pe_seg() wrongly. The issue was introduced by commit 262af55 ("powerpc/powernv: Enable M64 aperatus for PHB3"). The patch fixes the issue by simply skipping M64 resources when updating to M32DT. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman

powerpc/pseries: Little endian fixes for post mobility device tree update

2015-04-13T12:03:56Z

commit f6ff04149637723261aa4738958b0098b929ee9e upstream. We currently use the device tree update code in the kernel after resuming from a suspend operation to re-sync the kernels view of the device tree with that of the hypervisor. The code as it stands is not endian safe as it relies on parsing buffers returned by RTAS calls that thusly contains data in big endian format. This patch annotates variables and structure members with __be types as well as performing necessary byte swaps to cpu endian for data that needs to be parsed. Signed-off-by: Tyrel Datwyler Cc: Nathan Fontenot Cc: Cyril Bur Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/iommu: Remove IOMMU device references via bus notifier

2015-03-26T12:59:48Z

commit 4ad04e5987115ece5fa8a0cf1dc72fcd4707e33e upstream. After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the refcnt on the kobject backing the IOMMU group for a PCI device is elevated by each call to pci_dma_dev_setup_pSeriesLP() (via set_iommu_table_base_and_group). When we go to dlpar a multi-function PCI device out: iommu_reconfig_notifier -> iommu_free_table -> iommu_group_put BUG_ON(tbl->it_group) We trip this BUG_ON, because there are still references on the table, so it is not freed. Fix this by moving the powernv bus notifier to common code and calling it for both powernv and pseries. Fixes: d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier") Signed-off-by: Nishanth Aravamudan Tested-by: Nishanth Aravamudan Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

cxl: Fix device_node reference counting

2015-03-18T13:11:12Z

commit 6f963ec2d6bf2476a16799eece920acb2100ff1c upstream. When unbinding and rebinding the driver on a system with a card in PHB0, this error condition is reached after a few attempts: ERROR: Bad of_node_put() on /pciex@3fffe40000000 CPU: 0 PID: 3040 Comm: bash Not tainted 3.18.0-rc3-12545-g3627ffe #152 Call Trace: [c000000721acb5c0] [c00000000086ef94] .dump_stack+0x84/0xb0 (unreliable) [c000000721acb640] [c00000000073a0a8] .of_node_release+0xd8/0xe0 [c000000721acb6d0] [c00000000044bc44] .kobject_release+0x74/0xe0 [c000000721acb760] [c0000000007394fc] .of_node_put+0x1c/0x30 [c000000721acb7d0] [c000000000545cd8] .cxl_probe+0x1a98/0x1d50 [c000000721acb900] [c0000000004845a0] .local_pci_probe+0x40/0xc0 [c000000721acb980] [c000000000484998] .pci_device_probe+0x128/0x170 [c000000721acba30] [c00000000052400c] .driver_probe_device+0xac/0x2a0 [c000000721acbad0] [c000000000522468] .bind_store+0x108/0x160 [c000000721acbb70] [c000000000521448] .drv_attr_store+0x38/0x60 [c000000721acbbe0] [c000000000293840] .sysfs_kf_write+0x60/0xa0 [c000000721acbc50] [c000000000292500] .kernfs_fop_write+0x140/0x1d0 [c000000721acbcf0] [c000000000208648] .vfs_write+0xd8/0x260 [c000000721acbd90] [c000000000208b18] .SyS_write+0x58/0x100 [c000000721acbe30] [c000000000009258] syscall_exit+0x0/0x98 We are missing a call to of_node_get(). pnv_pci_to_phb_node() should call of_node_get() otherwise np's reference count isn't incremented and it might go away. Rename pnv_pci_to_phb_node() to pnv_pci_get_phb_node() so it's clear it calls of_node_get(). Signed-off-by: Ryan Grimm Acked-by: Ian Munsie Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/powernv: Restore LPCR with LPCR_PECE1 cleared

2015-01-22T06:22:57Z

LPCR_PECE1 bit controls whether decrementer interrupts are allowed to cause exit from power-saving mode. While waking up from winkle, restoring LPCR with LPCR_PECE1 set (i.e Decrementer interrupts allowed) can cause issue in the following scenario: - All the threads in a core are offlined. The core enters deep winkle. - Spurious interrupt wakes up a thread in the core. Here LPCR is restored with LPCR_PECE1 bit set. - Since it was a spurious interrupt on a offline thread, the thread clears the interrupt and goes back to winkle. - Here before the thread executes winkle and puts the core into deep winkle, if a decrementer interrupt occurs on any of the sibling threads in the core that thread wakes up. - Since in offline loop we are flushing interrupt only in case of external interrupt, the decrementer interrupt does not get flushed. So at this stage the thread is stuck in this is loop of waking up at 0x100 due to decrementer interrupt, not flushing the interrupt as only external interrupts get flushed, entering winkle, waking up at 0x100 again. Fix this by programming PORE to restore LPCR with LPCR_PECE1 bit cleared when waking up from winkle. Signed-off-by: Shreyas B. Prabhu Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman

powernv: Fix OPAL tracepoint code

2015-01-12T05:40:02Z

Patch c49f63530bb6 ("powernv: Add OPAL tracepoints") has a spurious store to the stack: ld r12,opal_tracepoint_refcount@toc(r2); \ std r12,32(r1); \ The store was originally used to save the current tracepoint status so the entry and the exit tracepoints were always balanced. In the end I just created a separate path when tracepoints are enabled. The offset on the stack used for this store is not valid for ABIv2 and it causes strange issues. I noticed it because OPAL console input was broken. Fixes: c49f63530bb6 ("powernv: Add OPAL tracepoints") Cc: # v3.17+ Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman

powerpc/kdump: Ignore failure in enabling big endian exception during crash

2014-12-29T04:44:53Z

In LE kernel, we currently have a hack for kexec that resets the exception endian before starting a new kernel as the kernel that is loaded could be a big endian or a little endian kernel. In kdump case, resetting exception endian fails when one or more cpus is disabled. But we can ignore the failure and still go ahead, as in most cases crashkernel will be of same endianess as primary kernel and reseting endianess is not even needed in those cases. This patch adds a new inline function to say if this is kdump path. This function is used at places where such a check is needed. Signed-off-by: Hari Bathini [mpe: Rename to kdump_in_progress(), use bool, and edit comment] Signed-off-by: Michael Ellerman

Merge tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

2014-12-19T20:57:45Z

Pull second batch of powerpc updates from Michael Ellerman: "The highlight is the series that reworks the idle management on powernv, which allows us to use deeper idle states on those machines. There's the fix from Anton for the "BUG at kernel/smpboot.c:134!" problem. An i2c driver for powernv. This is acked by Wolfram Sang, and he asked that we take it through the powerpc tree. A fix for audit from rgb at Red Hat, acked by Paul Moore who is one of the audit maintainers. A patch from Ben to export the symbol map of our OPAL firmware as a sysfs file, so that tools can use it. Also some CXL fixes, a couple of powerpc perf fixes, a fix for smt-enabled, and the patch to add __force to get_user() so we can use bitwise types" * tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Ignore smt-enabled on Power8 and later powerpc/uaccess: Allow get_user() with bitwise types powerpc/powernv: Expose OPAL firmware symbol map powernv/powerpc: Add winkle support for offline cpus powernv/cpuidle: Redesign idle states management powerpc/powernv: Enable Offline CPUs to enter deep idle states powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode i2c: Driver to expose PowerNV platform i2c busses powerpc: add little endian flag to syscall_get_arch() power/perf/hv-24x7: Use kmem_cache_free() instead of kfree powerpc/perf/hv-24x7: Use per-cpu page buffer cxl: Unmap MMIO regions when detaching a context cxl: Add timeout to process element commands cxl: Change contexts_lock to a mutex to fix sleep while atomic bug powerpc: Secondary CPUs must set cpu_callin_map after setting active and online