kernel.git/arch/powerpc/platforms, branch linux-3.18.y

powerpc/83xx: Also save/restore SPRG4-7 during suspend

2019-03-23T07:19:02Z

commit 36da5ff0bea2dc67298150ead8d8471575c54c7d upstream. The 83xx has 8 SPRG registers and uses at least SPRG4 for DTLB handling LRU. Fixes: 2319f1239592 ("powerpc/mm: e300c2/c3/c4 TLB errata workaround") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/powernv: Make opal log only readable by root

2019-03-23T07:19:02Z

commit 7b62f9bd2246b7d3d086e571397c14ba52645ef1 upstream. Currently the opal log is globally readable. It is kernel policy to limit the visibility of physical addresses / kernel pointers to root. Given this and the fact the opal log may contain this information it would be better to limit the readability to root. Fixes: bfc36894a48b ("powerpc/powernv: Add OPAL message log interface") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Jordan Niethe Reviewed-by: Stewart Smith Reviewed-by: Andrew Donnellan Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/wii: properly disable use of BATs when requested.

2019-03-23T07:19:02Z

commit 6d183ca8baec983dc4208ca45ece3c36763df912 upstream. 'nobats' kernel parameter or some options like CONFIG_DEBUG_PAGEALLOC deny the use of BATS for mapping memory. This patch makes sure that the specific wii RAM mapping function takes it into account as well. Fixes: de32400dd26e ("wii: use both mem1 and mem2 as ram") Cc: stable@vger.kernel.org Reviewed-by: Jonathan Neuschafer Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/pseries: add of_node_put() in dlpar_detach_node()

2019-02-20T09:08:56Z

[ Upstream commit 5b3f5c408d8cc59b87e47f1ab9803dbd006e4a91 ] The previous commit, "of: overlay: add missing of_node_get() in __of_attach_node_sysfs" added a missing of_node_get() to __of_attach_node_sysfs(). This results in a refcount imbalance for nodes attached with dlpar_attach_node(). The calling sequence from dlpar_attach_node() to __of_attach_node_sysfs() is: dlpar_attach_node() of_attach_node() __of_attach_node_sysfs() For more detailed description of the node refcount, see commit 68baf692c435 ("powerpc/pseries: Fix of_node_put() underflow during DLPAR remove"). Tested-by: Alan Tull Acked-by: Michael Ellerman Signed-off-by: Frank Rowand Signed-off-by: Sasha Levin

powerpc/powernv: opal_put_chars partial write fix

2018-09-26T06:33:56Z

[ Upstream commit bd90284cc6c1c9e8e48c8eadd0c79574fcce0b81 ] The intention here is to consume and discard the remaining buffer upon error. This works if there has not been a previous partial write. If there has been, then total_len is no longer total number of bytes to copy. total_len is always "bytes left to copy", so it should be added to written bytes. This code may not be exercised any more if partial writes will not be hit, but this is a small bugfix before a larger change. Reviewed-by: Benjamin Herrenschmidt Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

powerpc/pseries: Avoid using the size greater than RTAS_ERROR_LOG_MAX.

2018-09-26T06:33:52Z

[ Upstream commit 74e96bf44f430cf7a01de19ba6cf49b361cdfd6e ] The global mce data buffer that used to copy rtas error log is of 2048 (RTAS_ERROR_LOG_MAX) bytes in size. Before the copy we read extended_log_length from rtas error log header, then use max of extended_log_length and RTAS_ERROR_LOG_MAX as a size of data to be copied. Ideally the platform (phyp) will never send extended error log with size > 2048. But if that happens, then we have a risk of buffer overrun and corruption. Fix this by using min_t instead. Fixes: d368514c3097 ("powerpc: Fix corruption when grabbing FWNMI data") Reported-by: Michal Suchanek Signed-off-by: Mahesh Salgaonkar Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.

2018-09-09T18:07:54Z

commit cd813e1cd7122f2c261dce5b54d1e0c97f80e1a5 upstream. During Machine Check interrupt on pseries platform, register r3 points RTAS extended event log passed by hypervisor. Since hypervisor uses r3 to pass pointer to rtas log, it stores the original r3 value at the start of the memory (first 8 bytes) pointed by r3. Since hypervisor stores this info and rtas log is in BE format, linux should make sure to restore r3 value in correct endian format. Without this patch when MCE handler, after recovery, returns to code that that caused the MCE may end up with Data SLB access interrupt for invalid address followed by kernel panic or hang. Severe Machine check interrupt [Recovered] NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel] Initiator: CPU Error type: SLB [Multihit] Effective address: d00000000ca70000 cpu 0xa: Vector: 380 (Data SLB Access) at [c0000000fc7775b0] pc: c0000000009694c0: vsnprintf+0x80/0x480 lr: c0000000009698e0: vscnprintf+0x20/0x60 sp: c0000000fc777830 msr: 8000000002009033 dar: a803a30c000000d0 current = 0xc00000000bc9ef00 paca = 0xc00000001eca5c00 softe: 3 irq_happened: 0x01 pid = 8860, comm = insmod vscnprintf+0x20/0x60 vprintk_emit+0xb4/0x4b0 vprintk_func+0x5c/0xd0 printk+0x38/0x4c init_module+0x1c0/0x338 [bork_kernel] do_one_initcall+0x54/0x230 do_init_module+0x8c/0x248 load_module+0x12b8/0x15b0 sys_finit_module+0xa8/0x110 system_call+0x58/0x6c --- Exception: c00 (System Call) at 00007fff8bda0644 SP (7fffdfbfe980) is in userspace This patch fixes this issue. Fixes: a08a53ea4c97 ("powerpc/le: Enable RTAS events support") Cc: stable@vger.kernel.org # v3.15+ Reviewed-by: Nicholas Piggin Signed-off-by: Mahesh Salgaonkar Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/embedded6xx/hlwd-pic: Prevent interrupts from being handled by Starlet

2018-08-09T10:20:29Z

[ Upstream commit 9dcb3df4281876731e4e8bff7940514d72375154 ] The interrupt controller inside the Wii's Hollywood chip is connected to two masters, the "Broadway" PowerPC and the "Starlet" ARM926, each with their own interrupt status and mask registers. When booting the Wii with mini[1], interrupts from the SD card controller (IRQ 7) are handled by the ARM, because mini provides SD access over IPC. Linux however can't currently use or disable this IPC service, so both sides try to handle IRQ 7 without coordination. Let's instead make sure that all interrupts that are unmasked on the PPC side are masked on the ARM side; this will also make sure that Linux can properly talk to the SD card controller (and potentially other devices). If access to a device through IPC is desired in the future, interrupts from that device should not be handled by Linux directly. [1]: https://github.com/lewurm/mini Signed-off-by: Jonathan Neuschäfer Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

powerpc/powermac: Mark variable x as unused

2018-08-09T10:20:27Z

[ Upstream commit 5a4b475cf8511da721f20ba432c244061db7139f ] Since the value of x is never intended to be read, declare it with gcc attribute as unused. Fix warning treated as error with W=1: arch/powerpc/platforms/powermac/bootx_init.c:471:21: error: variable ‘x’ set but not used [-Werror=unused-but-set-variable] Suggested-by: Christophe Leroy Signed-off-by: Mathieu Malaterre Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

powerpc/powermac: Add missing prototype for note_bootable_part()

2018-08-09T10:20:27Z

[ Upstream commit f72cf3f1d49f2c35d6cb682af2e8c93550f264e4 ] Add a missing prototype for function `note_bootable_part` to silence a warning treated as error with W=1: arch/powerpc/platforms/powermac/setup.c:361:12: error: no previous prototype for ‘note_bootable_part’ [-Werror=missing-prototypes] Suggested-by: Christophe Leroy Signed-off-by: Mathieu Malaterre Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman