kernel.git/arch/powerpc/platforms/pseries, branch linux-6.5.y

powerpc/pseries: fix potential memory leak in init_cpu_associativity()

2023-11-20T10:57:17Z

[ Upstream commit 95f1a128cd728a7257d78e868f1f5a145fc43736 ] If the vcpu_associativity alloc memory successfully but the pcpu_associativity fails to alloc memory, the vcpu_associativity memory leaks. Fixes: d62c8deeb6e6 ("powerpc/pseries: Provide vcpu dispatch statistics") Signed-off-by: Wang Yufen Reviewed-by: "Naveen N. Rao" Signed-off-by: Michael Ellerman Link: https://msgid.link/1671003983-10794-1-git-send-email-wangyufen@huawei.com Signed-off-by: Sasha Levin

powerpc/vas: Limit open window failure messages in log bufffer

2023-11-20T10:57:17Z

[ Upstream commit 73b25505ce043b561028e5571d84dc82aa53c2b4 ] The VAS open window call prints error message and returns -EBUSY after the migration suspend event initiated and until the resume event completed on the destination system. It can cause the log buffer filled with these error messages if the user space issues continuous open window calls. Similar case even for DLPAR CPU remove event when no credits are available until the credits are freed or with the other DLPAR CPU add event. So changes in the patch to use pr_err_ratelimited() instead of pr_err() to display open window failure and not-available credits error messages. Use pr_fmt() and make the corresponding changes to have the consistencein prefix all pr_*() messages (vas-api.c). Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler") Signed-off-by: Haren Myneni [mpe: Use "vas-api" as the prefix to match the file name.] Signed-off-by: Michael Ellerman Link: https://msgid.link/20231019215033.1335251-1-haren@linux.ibm.com Signed-off-by: Sasha Levin

powerpc/pseries: Fix STK_PARAM access in the hcall tracing code

2023-10-19T21:11:05Z

commit 3b678768c0458e6d8d45fadf61423e44effed4cb upstream. In powerpc pseries system, below behaviour is observed while enabling tracing on hcall: # cd /sys/kernel/debug/tracing/ # cat events/powerpc/hcall_exit/enable 0 # echo 1 > events/powerpc/hcall_exit/enable # ls -bash: fork: Bad address Above is from power9 lpar with latest kernel. Past this, softlockup is observed. Initially while attempting via perf_event_open to use "PERF_TYPE_TRACEPOINT", kernel panic was observed. perf config used: ================ memset(&pe[1],0,sizeof(struct perf_event_attr)); pe[1].type=PERF_TYPE_TRACEPOINT; pe[1].size=96; pe[1].config=0x26ULL; /* 38 raw_syscalls/sys_exit */ pe[1].sample_type=0; /* 0 */ pe[1].read_format=PERF_FORMAT_TOTAL_TIME_ENABLED|PERF_FORMAT_TOTAL_TIME_RUNNING|PERF_FORMAT_ID|PERF_FORMAT_GROUP|0x10ULL; /* 1f */ pe[1].inherit=1; pe[1].precise_ip=0; /* arbitrary skid */ pe[1].wakeup_events=0; pe[1].bp_type=HW_BREAKPOINT_EMPTY; pe[1].config1=0x1ULL; Kernel panic logs: ================== Kernel attempted to read user page (8) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000008 Faulting instruction address: 0xc0000000004c2814 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: nfnetlink bonding tls rfkill sunrpc dm_service_time dm_multipath pseries_rng xts vmx_crypto xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ibmvfc scsi_transport_fc ibmveth dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 0 PID: 1431 Comm: login Not tainted 6.4.0+ #1 Hardware name: IBM,8375-42A POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.30 (VL950_892) hv:phyp pSeries NIP page_remove_rmap+0x44/0x320 LR wp_page_copy+0x384/0xec0 Call Trace: 0xc00000001416e400 (unreliable) wp_page_copy+0x384/0xec0 __handle_mm_fault+0x9d4/0xfb0 handle_mm_fault+0xf0/0x350 ___do_page_fault+0x48c/0xc90 hash__do_page_fault+0x30/0x70 do_hash_fault+0x1a4/0x330 data_access_common_virt+0x198/0x1f0 --- interrupt: 300 at 0x7fffae971abc git bisect tracked this down to below commit: 'commit baa49d81a94b ("powerpc/pseries: hvcall stack frame overhead")' This commit changed STACK_FRAME_OVERHEAD (112 ) to STACK_FRAME_MIN_SIZE (32 ) since 32 bytes is the minimum size for ELFv2 stack. With the latest kernel, when running on ELFv2, STACK_FRAME_MIN_SIZE is used to allocate stack size. During plpar_hcall_trace, first call is made to HCALL_INST_PRECALL which saves the registers and allocates new stack frame. In the plpar_hcall_trace code, STK_PARAM is accessed at two places. 1. To save r4: std r4,STK_PARAM(R4)(r1) 2. To access r4 back: ld r12,STK_PARAM(R4)(r1) HCALL_INST_PRECALL precall allocates a new stack frame. So all the stack parameter access after the precall, needs to be accessed with +STACK_FRAME_MIN_SIZE. So the store instruction should be: std r4,STACK_FRAME_MIN_SIZE+STK_PARAM(R4)(r1) If the "std" is not updated with STACK_FRAME_MIN_SIZE, we will end up with overwriting stack contents and cause corruption. But instead of updating 'std', we can instead remove it since HCALL_INST_PRECALL already saves it to the correct location. similarly load instruction should be: ld r12,STACK_FRAME_MIN_SIZE+STK_PARAM(R4)(r1) Fix the load instruction to correctly access the stack parameter with +STACK_FRAME_MIN_SIZE and remove the store of r4 since the precall saves it correctly. Cc: stable@vger.kernel.org # v6.2+ Fixes: baa49d81a94b ("powerpc/pseries: hvcall stack frame overhead") Co-developed-by: Naveen N Rao Signed-off-by: Naveen N Rao Signed-off-by: Athira Rajeev Signed-off-by: Michael Ellerman Link: https://msgid.link/20230929172337.7906-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman

powerpc/pseries: fix possible memory leak in ibmebus_bus_init()

2023-09-23T09:14:27Z

[ Upstream commit afda85b963c12947e298ad85d757e333aa40fd74 ] If device_register() returns error in ibmebus_bus_init(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup(). Signed-off-by: ruanjinjie Signed-off-by: Michael Ellerman Link: https://msgid.link/20221110011929.3709774-1-ruanjinjie@huawei.com Signed-off-by: Sasha Levin

powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n

2023-09-13T07:53:32Z

[ Upstream commit 750bd41aeaeb1f0e0128aa4f8fcd6dd759713641 ] With JUMP_LABEL=n, hcall_tracepoint_refcount's address is being tested instead of its value. This results in the tracing slowpath always being taken unnecessarily. Fixes: 9a10ccb29c0a2 ("powerpc/pseries: move hcall_tracepoint_refcount out of .toc") Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://msgid.link/20230509091600.70994-1-npiggin@gmail.com Signed-off-by: Sasha Levin

powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT

2023-09-13T07:53:32Z

[ Upstream commit eac030b22ea12cdfcbb2e941c21c03964403c63f ] lppaca_shared_proc() takes a pointer to the lppaca which is typically accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads to checking if preemption is enabled, for example: BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693 caller is lparcfg_data+0x408/0x19a0 CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2 Call Trace: dump_stack_lvl+0x154/0x200 (unreliable) check_preemption_disabled+0x214/0x220 lparcfg_data+0x408/0x19a0 ... This isn't actually a problem however, as it does not matter which lppaca is accessed, the shared proc state will be the same. vcpudispatch_stats_procfs_init() already works around this by disabling preemption, but the lparcfg code does not, erroring any time /proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled. Instead of disabling preemption on the caller side, rework lppaca_shared_proc() to not take a pointer and instead directly access the lppaca, bypassing any potential preemption checks. Fixes: f13c13a00512 ("powerpc: Stop using non-architected shared_proc field in lppaca") Signed-off-by: Russell Currey [mpe: Rework to avoid needing a definition in paca.h and lppaca.h] Signed-off-by: Michael Ellerman Link: https://msgid.link/20230823055317.751786-4-mpe@ellerman.id.au Signed-off-by: Sasha Levin

powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close

2023-07-17T00:35:06Z

Commit 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR core removal") unmaps the window paste address and issues HCALL to close window in the hypervisor for migration or DLPAR core removal events. So holds mmap_mutex and then mmap lock before unmap the paste address. But if the user space issue mmap paste address at the same time with the migration event, coproc_mmap() is called after holding the mmap lock which can trigger deadlock when trying to acquire mmap_mutex in coproc_mmap(). t1: mmap() call to mmap t2: Migration event window paste address do_mmap2() migration_store() ksys_mmap_pgoff() pseries_migrate_partition() vm_mmap_pgoff() vas_migration_handler() Acquire mmap lock reconfig_close_windows() do_mmap() lock mmap_mutex mmap_region() Acquire mmap lock call_mmap() //Wait for mmap lock coproc_mmap() unmap vma lock mmap_mutex update window status //wait for mmap_mutex Release mmap lock mmap vma unlock mmap_mutex update window status unlock mmap_mutex ... Release mmap lock Fix this deadlock issue by holding mmap lock first before mmap_mutex in reconfig_close_windows(). Fixes: 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR core removal") Signed-off-by: Haren Myneni Signed-off-by: Michael Ellerman Link: https://msgid.link/20230716100506.7833-1-haren@linux.ibm.com

powerpc: Include asm/nmi.c in mobility.c for watchdog_hardlockup_set_timeout_pct()

2023-07-03T06:08:10Z

The powerpc/platforms/pseries/mobility.c calls watchdog_hardlockup_set_timeout_pct(), which is declared in . We used to automatically get included, but that changed as of commit 7ca8fe94aa92 ("watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH"). Let's add the explicit include. Reported-by: Randy Dunlap Closes: https://lore.kernel.org/r/af19b76d-aa4b-6c88-9cac-eae4b2072497@infradead.org Fixes: 7ca8fe94aa92 ("watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH") Signed-off-by: Douglas Anderson Tested-by: Randy Dunlap # build-tested Reviewed-by: Petr Mladek Reviewed-by: Randy Dunlap Signed-off-by: Michael Ellerman Link: https://msgid.link/20230629124500.1.I55e2f4e7903d686c4484cb23c033c6a9e1a9d4c4@changeid

Merge tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2023-06-30T16:20:08Z

Pull powerpc updates from Michael Ellerman: - Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations - Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and use the -mprofile-kernel option (kernel specific ftrace ABI) for big endian ELFv2 kernels - Add initial Dynamic Execution Control Register (DEXCR) support, and allow the ROP protection instructions to be used on Power 10 - Various other small features and fixes Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King, Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry, Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey, Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König. * tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits) powerpc: remove checks for binutils older than 2.25 powerpc: Fail build if using recordmcount with binutils v2.37 powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory powerpc/iommu: Only build sPAPR access functions on pSeries powerpc: powernv: Annotate data races in opal events powerpc: Mark writes registering ipi to host cpu through kvm and polling powerpc: Annotate accesses to ipi message flags powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid powerpc: qspinlock: Enforce qnode writes prior to publishing to queue powerpc: qspinlock: Mark accesses to qnode lock checks powerpc/powernv/pci: Remove last IODA1 defines powerpc/powernv/pci: Remove MVE code powerpc/powernv/pci: Remove ioda1 support powerpc: 52xx: Make immr_id DT match tables static powerpc: mpc512x: Remove open coded "ranges" parsing powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing powerpc: fsl: Use of_property_read_reg() to parse "reg" powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing macintosh: Use of_property_read_reg() to parse "reg" ...

Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2023-06-28T17:59:38Z

Pull non-mm updates from Andrew Morton: - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level directories - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs - Zhen Lei has enhanced kexec's ability to support two crash regions - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries - And the usual bunch of singleton patches in various places * tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) kernel/time/posix-stubs.c: remove duplicated include ocfs2: remove redundant assignment to variable bit_off watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h devres: show which resource was invalid in __devm_ioremap_resource() watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64 watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h watchdog/hardlockup: make the config checks more straightforward watchdog/hardlockup: sort hardlockup detector related config values a logical way watchdog/hardlockup: move SMP barriers from common code to buddy code watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY watchdog/buddy: don't copy the cpumask in watchdog_next_cpu() watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog() watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy() watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick() watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe() watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails ...