kernel.git/arch/powerpc/platforms/pseries, branch linux-5.0.y

powerpc/pseries: Perform full re-add of CPU for topology update post-migration

2019-04-05T20:34:46Z

[ Upstream commit 81b61324922c67f73813d8a9c175f3c153f6a1c6 ] On pseries systems, performing a partition migration can result in altering the nodes a CPU is assigned to on the destination system. For exampl, pre-migration on the source system CPUs are in node 1 and 3, post-migration on the destination system CPUs are in nodes 2 and 3. Handling the node change for a CPU can cause corruption in the slab cache if we hit a timing where a CPUs node is changed while cache_reap() is invoked. The corruption occurs because the slab cache code appears to rely on the CPU and slab cache pages being on the same node. The current dynamic updating of a CPUs node done in arch/powerpc/mm/numa.c does not prevent us from hitting this scenario. Changing the device tree property update notification handler that recognizes an affinity change for a CPU to do a full DLPAR remove and add of the CPU instead of dynamically changing its node resolves this issue. Signed-off-by: Nathan Fontenot Signed-off-by: Michael W. Bringmann Tested-by: Michael W. Bringmann Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin

powerpc/pseries/mce: Fix misleading print for TLB mutlihit

2019-04-03T04:27:38Z

commit 6f845ebec2706841d15831fab3ffffcfd9e676fa upstream. On pseries, TLB multihit are reported as D-Cache Multihit. This is because the wrongly populated mc_err_types[] array. Per PAPR, TLB error type is 0x04 and mc_err_types[4] points to "D-Cache" instead of "TLB" string. Fixup the mc_err_types[] array. Machine check error type per PAPR: 0x00 = Uncorrectable Memory Error (UE) 0x01 = SLB error 0x02 = ERAT Error 0x04 = TLB error 0x05 = D-Cache error 0x07 = I-Cache error Fixes: 8f0b80561f21 ("powerpc/pseries: Display machine check error details.") Cc: stable@vger.kernel.org # v4.20+ Reported-by: Aneesh Kumar K.V Signed-off-by: Mahesh Salgaonkar Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexes

2019-04-03T04:27:38Z

commit ce9afe08e71e3f7d64f337a6e932e50849230fc2 upstream. In cpu_to_drc_index() in the case when FW_FEATURE_DRC_INFO is absent, we currently use of_read_property() to obtain the pointer to the array corresponding to the property "ibm,drc-indexes". The elements of this array are of type __be32, but are accessed without any conversion to the OS-endianness, which is buggy on a Little Endian OS. Fix this by using of_property_read_u32_index() accessor function to safely read the elements of the array. Fixes: e83636ac3334 ("pseries/drc-info: Search DRC properties for CPU indexes") Cc: stable@vger.kernel.org # v4.16+ Reported-by: Pavithra R. Prakash Signed-off-by: Gautham R. Shenoy Reviewed-by: Vaidyanathan Srinivasan [mpe: Make the WARN_ON a WARN_ON_ONCE so it's not retriggerable] Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/papr_scm: Use the correct bind address

2019-01-31T23:13:51Z

When binding an SCM volume to a physical address the hypervisor has the option to return early with a continue token with the expectation that the guest will resume the bind operation until it completes. A quirk of this interface is that the bind address will only be returned by the first bind h-call and the subsequent calls will return 0xFFFF_FFFF_FFFF_FFFF for the bind address. We currently do not save the address returned by the first h-call. As a result we will use the junk address as the base of the bound region if the hypervisor decides to split the bind across multiple h-calls. This bug was found when testing with very large SCM volumes where the bind process would take more time than they hypervisor's internal h-call time limit would allow. This patch fixes the issue by saving the bind address from the first call. Cc: stable@vger.kernel.org Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by: Oliver O'Halloran Signed-off-by: Michael Ellerman

powerpc/pseries: Fix build break due to pnv_npu2_init()

2019-01-15T10:27:47Z

Commit 3be2df00e299 ("powerpc/pseries/npu: Enable platform support") added a call to pnv_npu2_init() in pseries code. This causes a build break if we build with CONFIG_PPC_PSERIES && !CONFIG_PPC_POWERNV: powerpc64le-pc-linux-gnu-ld: arch/powerpc/platforms/pseries/pci.o: in function `pSeries_final_fixup': pci.c:(.init.text+0x1b0): undefined reference to `pnv_npu2_init' This commit therefore wraps that line in an ifdef, so that pseries builds without powernv. Fixes: 3be2df00e299 ("powerpc/pseries/npu: Enable platform support") Signed-off-by: Jason A. Donenfeld Reviewed-by: Alexey Kardashevskiy [mpe: Frob change log a bit to blame a different commit] Signed-off-by: Michael Ellerman

jump_label: move 'asm goto' support test to Kconfig

2019-01-06T00:46:51Z

Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label". The jump label is controlled by HAVE_JUMP_LABEL, which is defined like this: #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) # define HAVE_JUMP_LABEL #endif We can improve this by testing 'asm goto' support in Kconfig, then make JUMP_LABEL depend on CC_HAS_ASM_GOTO. Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will match to the real kernel capability. Signed-off-by: Masahiro Yamada Acked-by: Michael Ellerman (powerpc) Tested-by: Sedat Dilek

Remove 'type' argument from access_ok() function

2019-01-04T02:57:57Z

Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds

Merge tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2018-12-29T21:40:29Z

Pull Kconfig file consolidation from Masahiro Yamada: "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by Christoph Hellwig. Currently, every architecture that wants to provide common peripheral busses needs to add some boilerplate code and include the right Kconfig files. This series instead just selects the presence (when needed) and then handles everything in the bus-specific Kconfig file under drivers/" * tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: pcmcia: remove per-arch PCMCIA config entry eisa: consolidate EISA Kconfig entry in drivers/eisa rapidio: consolidate RAPIDIO config entry in drivers/rapidio pcmcia: allow PCMCIA support independent of the architecture PCI: consolidate the PCI_SYSCALL symbol PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options PCI: consolidate PCI config entry in drivers/pci MIPS: remove the HT_PCI config option

Merge tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2018-12-29T04:08:34Z

Pull Devicetree updates from Rob Herring: "The biggest highlight here is the start of using json-schema for DT bindings. Being able to validate bindings has been discussed for years with little progress. - Initial support for DT bindings using json-schema language. This is the start of converting DT bindings from free-form text to a structured format. - Reworking of initrd address initialization. This moves to using the phys address instead of virt addr in the DT parsing code. This rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary rebuilding of lots of files. - Fix stale phandle entries in phandle cache - DT overlay validation improvements. This exposed several memory leak bugs which have been fixed. - Use node name and device_type helper functions in DT code - Last remaining conversions to using %pOFn printk specifier instead of device_node.name directly - Create new common RTC binding doc and move all trivial RTC devices out of trivial-devices.txt. - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra PHY, and Xen shared memory - Update dtc to upstream version v1.4.7-57-gf267e674d145" * tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits) of: __of_detach_node() - remove node from phandle cache of: of_node_get()/of_node_put() nodes held in phandle cache gpio-omap.txt: add reg and interrupts properties dt-bindings: mrvl,intc: fix a trivial typo dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110 dt-bindings: Convert trivial-devices.txt to json-schema dt-bindings: arm: mrvl: amend Browstone compatible string dt-bindings: arm: Convert Tegra board/soc bindings to json-schema dt-bindings: arm: Convert ZTE board/soc bindings to json-schema dt-bindings: arm: Add missing Xilinx boards dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema dt-bindings: arm: Convert VIA board/soc bindings to json-schema dt-bindings: arm: Convert ST STi board/soc bindings to json-schema dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema dt-bindings: arm: Convert QCom board/soc bindings to json-schema dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema dt-bindings: arm: Convert Altera board/soc bindings to json-schema ...

Merge branch 'akpm' (patches from Andrew)

2018-12-29T00:55:46Z

Merge misc updates from Andrew Morton: - large KASAN update to use arm's "software tag-based mode" - a few misc things - sh updates - ocfs2 updates - just about all of MM * emailed patches from Andrew Morton : (167 commits) kernel/fork.c: mark 'stack_vm_area' with __maybe_unused memcg, oom: notify on oom killer invocation from the charge path mm, swap: fix swapoff with KSM pages include/linux/gfp.h: fix typo mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization memory_hotplug: add missing newlines to debugging output mm: remove __hugepage_set_anon_rmap() include/linux/vmstat.h: remove unused page state adjustment macro mm/page_alloc.c: allow error injection mm: migrate: drop unused argument of migrate_page_move_mapping() blkdev: avoid migration stalls for blkdev pages mm: migrate: provide buffer_migrate_page_norefs() mm: migrate: move migrate_page_lock_buffers() mm: migrate: lock buffers before migrate_page_move_mapping() mm: migration: factor out code to compute expected number of page references mm, page_alloc: enable pcpu_drain with zone capability kmemleak: add config to select auto scan mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init ...