kernel.git/arch/powerpc/platforms/pseries, branch linux-4.10.y

Replace with globally

2016-12-24T19:46:01Z

This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro Signed-off-by: Linus Torvalds

Merge tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2016-12-16T17:26:42Z

Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for the kexec_file_load() syscall, which is a prereq for secure and trusted boot. - Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN). - Sort the exception tables at build time, to save time at boot, and store them as relative offsets to save space in the kernel image & memory. - Allow building the kernel with thin archives, which should allow us to build an allyesconfig once some other fixes land. - Build fixes to allow us to correctly rebuild when changing the kernel endian from big to little or vice versa. - Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix. - Initial stack protector support (-fstack-protector). - Support for dumping the radix (aka. Linux) and hash page tables via debugfs. - Fix an oops in cxl coredump generation when cxl_get_fd() is used. - Freescale updates from Scott: "Highlights include 8xx hugepage support, qbman fixes/cleanup, device tree updates, and some misc cleanup." - Many and varied fixes and minor enhancements as always. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain" [ And thanks to Michael, who took time off from a new baby to get this pull request done. - Linus ] * tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits) powerpc/fsl/dts: add FMan node for t1042d4rdb powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb powerpc/fsl/dts: add QMan and BMan nodes on t1024 powerpc/fsl/dts: add QMan and BMan nodes on t1023 soc/fsl/qman: test: use DEFINE_SPINLOCK() powerpc/fsl-lbc: use DEFINE_SPINLOCK() powerpc/8xx: Implement support of hugepages powerpc: get hugetlbpage handling more generic powerpc: port 64 bits pgtable_cache to 32 bits powerpc/boot: Request no dynamic linker for boot wrapper soc/fsl/bman: Use resource_size instead of computation soc/fsl/qe: use builtin_platform_driver powerpc/fsl_pmc: use builtin_platform_driver powerpc/83xx/suspend: use builtin_platform_driver powerpc/ftrace: Fix the comments for ftrace_modify_code powerpc/perf: macros for power9 format encoding powerpc/perf: power9 raw event format encoding powerpc/perf: update attribute_group data structure powerpc/perf: factor out the event format field powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown ...

Merge tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2016-12-15T21:49:34Z

Pull tracing updates from Steven Rostedt: "This release has a few updates: - STM can hook into the function tracer - Function filtering now supports more advance glob matching - Ftrace selftests updates and added tests - Softirq tag in traces now show only softirqs - ARM nop added to non traced locations at compile time - New trace_marker_raw file that allows for binary input - Optimizations to the ring buffer - Removal of kmap in trace_marker - Wakeup and irqsoff tracers now adhere to the set_graph_notrace file - Other various fixes and clean ups" * tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (42 commits) selftests: ftrace: Shift down default message verbosity kprobes/trace: Fix kprobe selftest for newer gcc tracing/kprobes: Add a helper method to return number of probe hits tracing/rb: Init the CPU mask on allocation tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results tracing/fgraph: Have wakeup and irqsoff tracers ignore graph functions too fgraph: Handle a case where a tracer ignores set_graph_notrace tracing: Replace kmap with copy_from_user() in trace_marker writing ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it tracing: Allow benchmark to be enabled at early_initcall() tracing: Have system enable return error if one of the events fail tracing: Do not start benchmark on boot up tracing: Have the reg function allow to fail ring-buffer: Force rb_end_commit() and rb_set_commit_to_write() inline ring-buffer: Froce rb_update_write_stamp() to be inlined ring-buffer: Force inline of hotpath helper functions tracing: Make __buffer_unlock_commit() always_inline tracing: Make tracepoint_printk a static_key ring-buffer: Always inline rb_event_data() ring-buffer: Make rb_reserve_next_event() always inlined ...

tracing: Have the reg function allow to fail

2016-12-09T14:13:30Z

Some tracepoints have a registration function that gets enabled when the tracepoint is enabled. There may be cases that the registraction function must fail (for example, can't allocate enough memory). In this case, the tracepoint should also fail to register, otherwise the user would not know why the tracepoint is not working. Cc: David Howells Cc: Seiji Aguchi Cc: Anton Blanchard Cc: Mathieu Desnoyers Signed-off-by: Steven Rostedt

powerpc/pseries: Use lmb_is_removable() to check removability

2016-12-01T09:49:42Z

We should be using lmb_is_removable() to validate that enough LMBs are available to remove when doing a remove by count. This will check that the LMB is owned by the system and it is considered removable. This patch also adds a pr_info() notification to report the LMB count to remove was not satisfied. What we do now is just check that there are enough LMBs owned by the system when validating there are enough LMBs to remove. This can lead to situations where there are enough LMBs owned by the system but not enough that are considered removable. This results in having to bail out of the remove operation instead of just failing the request that we should have known wouldn't succeed. Signed-off-by: Nathan Fontenot Signed-off-by: Michael Ellerman

powerpc: Change places using CONFIG_KEXEC to use CONFIG_KEXEC_CORE instead.

2016-11-30T12:15:11Z

Commit 2965faa5e03d ("kexec: split kexec_load syscall from kexec core code") introduced CONFIG_KEXEC_CORE so that CONFIG_KEXEC means whether the kexec_load system call should be compiled-in and CONFIG_KEXEC_FILE means whether the kexec_file_load system call should be compiled-in. These options can be set independently from each other. Since until now powerpc only supported kexec_load, CONFIG_KEXEC and CONFIG_KEXEC_CORE were synonyms. That is not the case anymore, so we need to make a distinction. Almost all places where CONFIG_KEXEC was being used should be using CONFIG_KEXEC_CORE instead, since kexec_file_load also needs that code compiled in. Signed-off-by: Thiago Jung Bauermann Signed-off-by: Michael Ellerman

Merge branch 'topic/ppc-kvm' into next

2016-11-24T11:14:52Z

Merge the topic branch we're sharing with the kvm-ppc tree.

powerpc/pseries/ibmebus: Remove legacy suspend/resume support

2016-11-23T11:56:26Z

There are no ibmebus driver that make use of legacy suspend/resume. This patch removes the support for it from ibmebus framework, new ibmebus driver (as unlikely as they are) wanting to use suspend/resume should use dev_pm_ops. Since there aren't any special bus specific things to do during suspend/resume and since the PM core will automatically fallback directly to using the device's PM ops if no bus PM ops are specified there is no need to have any special ibmebus PM ops at all. Signed-off-by: Lars-Peter Clausen Signed-off-by: Michael Ellerman

powerpc/pci: Always print PHB and PE numbers as hexadecimal

2016-11-22T00:57:07Z

PHB, PE (and by association MVE) numbers are printed as a mix of decimal and hexadecimal throughout the kernel. This can be misleading, so make them all hexadecimal. Standardising on hex instead of dec because: - PHB numbers are presented in hex in sysfs/debugfs (and lspci, etc) - PE numbers are presented as hex in sysfs and parsed in hex in debugfs The only place I think this could cause confusing are the messages during boot, i.e. pci 000a:01 : [PE# 000] Secondary bus 1 associated with PE#0 which can be a quick way to check PE numbers. pe_level_printk() will only print two characters instead of three, so the above would be pci 000a:01 : [PE# 00] Secondary bus 1 associated with PE#0 which gives a hint it's in hex. Signed-off-by: Russell Currey Signed-off-by: Michael Ellerman

powerpc/pseries: Disable IBMEBUS on little endian builds

2016-11-18T12:02:18Z

The IBMEBUS code supports the GX bus found on Power7 and earlier CPUs. On Power8 it has been replaced, and so we have no need for it. We don't actually have a config symbol for Power8 vs Power7 etc., but we only support booting little endian on Power8 or later, so use that as a reasonable approximation. Signed-off-by: Michael Ellerman