kernel.git/arch/powerpc/platforms/pseries, branch linux-3.15.y

powerpc/pseries: dynamically added OF nodes need to call of_node_init

2014-07-31T19:44:07Z

commit 97a9a7179aad701ab676e6f29eb90766a1acfde2 upstream. Commit 75b57ecf9 refactored device tree nodes to use kobjects such that they can be exposed via /sysfs. A secondary commit 0829f6d1f furthered this rework by moving the kobect initialization logic out of of_node_add into its own of_node_init function. The inital commit removed the existing kref_init calls in the pseries dlpar code with the assumption kobject initialization would occur in of_node_add. The second commit had the side effect of triggering a BUG_ON during DLPAR, migration and suspend/resume operations as a result of dynamically added nodes being uninitialized. This patch fixes this by adding of_node_init calls in place of the previously removed kref_init calls. Fixes: 0829f6d1f69e ("of: device_node kobject lifecycle fixes") Signed-off-by: Tyrel Datwyler Acked-by: Nathan Fontenot Acked-by: Grant Likely Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman

powerpc/pseries: Fix overwritten PE state

2014-07-07T01:59:11Z

commit 54f112a3837d4e7532bbedbbbf27c0de277be510 upstream. In pseries_eeh_get_state(), EEH_STATE_UNAVAILABLE is always overwritten by EEH_STATE_NOT_SUPPORT because of the missed "break" there. The patch fixes the issue. Reported-by: Joe Perches Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman

powerpc/pseries: Protect remove_memory() with device hotplug lock

2014-04-28T06:32:14Z

While testing memory hot-remove, I found following dead lock: Process #1141 is drmgr, trying to remove some memory, i.e. memory499. It holds the memory_hotplug_mutex, and blocks when trying to remove file "online" under dir memory499, in kernfs_drain(), at wait_event(root->deactivate_waitq, atomic_read(&kn->active) == KN_DEACTIVATED_BIAS); Process #1120 is trying to online memory499 by echo 1 > memory499/online In .kernfs_fop_write, it uses kernfs_get_active() to increase &kn->active, thus blocking process #1141. While itself is blocked later when trying to acquire memory_hotplug_mutex, which is held by process The backtrace of both processes are shown below: [] 0xc000000001b18600 [] .__switch_to+0x144/0x200 [] .online_pages+0x74/0x7b0 [] .memory_subsys_online+0x9c/0x150 [] .device_online+0xb8/0x120 [] .online_store+0xb4/0xc0 [] .dev_attr_store+0x64/0xa0 [] .sysfs_kf_write+0x7c/0xb0 [] .kernfs_fop_write+0x154/0x1e0 [] .vfs_write+0xe0/0x260 [] .SyS_write+0x64/0x110 [] syscall_exit+0x0/0x7c [] 0xc000000001b18600 [] .__switch_to+0x144/0x200 [] .__kernfs_remove+0x204/0x300 [] .kernfs_remove_by_name_ns+0x68/0xf0 [] .sysfs_remove_file_ns+0x38/0x60 [] .device_remove_attrs+0x54/0xc0 [] .device_del+0x158/0x250 [] .device_unregister+0x34/0xa0 [] .unregister_memory_section+0x164/0x170 [] .__remove_pages+0x108/0x4c0 [] .arch_remove_memory+0x60/0xc0 [] .remove_memory+0x8c/0xe0 [] .pseries_remove_memblock+0xd4/0x160 [] .pseries_memory_notifier+0x27c/0x290 [] .notifier_call_chain+0x8c/0x100 [] .__blocking_notifier_call_chain+0x6c/0xe0 [] .of_property_notify+0x7c/0xc0 [] .of_update_property+0x3c/0x1b0 [] .ofdt_write+0x3dc/0x740 [] .proc_reg_write+0xac/0x110 [] .vfs_write+0xe0/0x260 [] .SyS_write+0x64/0x110 [] syscall_exit+0x0/0x7c This patch uses lock_device_hotplug() to protect remove_memory() called in pseries_remove_memblock(), which is also stated before function remove_memory(): * NOTE: The caller must call lock_device_hotplug() to serialize hotplug * and online/offline operations before this call, as required by * try_offline_node(). */ void __ref remove_memory(int nid, u64 start, u64 size) With this lock held, the other process(#1120 above) trying to online the memory block will retry the system call when calling lock_device_hotplug_sysfs(), and finally find No such device error. Signed-off-by: Li Zhong Signed-off-by: Benjamin Herrenschmidt

powerpc: Fix Oops in rtas_stop_self()

2014-04-28T03:08:47Z

commit 41dd03a9 may cause Oops in rtas_stop_self(). The reason is that the rtas_args was moved into stack space. For a box with more that 4GB RAM, the stack could easily be outside 32bit range, but RTAS is 32bit. So the patch moves rtas_args away from stack by adding static before it. Signed-off-by: Li Zhong Signed-off-by: Anton Blanchard Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Benjamin Herrenschmidt

powerpc: Convert last uses of FUNCTION to func

2014-04-09T02:53:32Z

Just about all of these have been converted to __func__, so convert the last uses. Signed-off-by: Joe Perches Signed-off-by: Benjamin Herrenschmidt

powerpc/le: Enable RTAS events support

2014-04-07T00:33:12Z

The current kernel code assumes big endian and parses RTAS events all wrong. The most visible effect is that we cannot honor EPOW events, meaning, for example, we cannot shut down a guest properly from the hypervisor. This new patch is largely inspired by Nathan's work: we get rid of all the bit fields in the RTAS event structures (even the unused ones, for consistency). We also introduce endian safe accessors for the fields used by the kernel (trivial rtas_error_type() accessor added for consistency). Cc: Nathan Fontenot Signed-off-by: Greg Kurz Signed-off-by: Benjamin Herrenschmidt

Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux

2014-04-02T21:27:15Z

Pull devicetree changes from Grant Likely: "Updates to devicetree core code. This branch contains the following notable changes: - add reserved memory binding - make struct device_node a kobject and remove legacy /proc/device-tree - ePAPR conformance fixes - update in-kernel DTC copy to version v1.4.0 - preparatory changes for dynamic device tree overlays - minor bug fixes and documentation changes The most significant change in this branch is the conversion of struct device_node to be a kobject that is exposed via sysfs and removal of the old /proc/device-tree code. This simplifies the device tree handling code and tightens up the lifecycle on device tree nodes. [updated: added fix for dangling select PROC_DEVICETREE]" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits) dt: Remove dangling "select PROC_DEVICETREE" of: Add support for ePAPR "stdout-path" property of: device_node kobject lifecycle fixes of: only scan for reserved mem when fdt present powerpc: add support for reserved memory defined by device tree arm64: add support for reserved memory defined by device tree of: add missing major vendors of: add vendor prefix for SMSC of: remove /proc/device-tree of/selftest: Add self tests for manipulation of properties of: Make device nodes kobjects so they show up in sysfs arm: add support for reserved memory defined by device tree drivers: of: add support for custom reserved memory drivers drivers: of: add initialization code for dynamic reserved memory drivers: of: add initialization code for static reserved memory of: document bindings for reserved-memory nodes Revert "of: fix of_update_property()" kbuild: dtbs_install: new make target ARM: mvebu: Allows to get the SoC ID even without PCI enabled of: Allows to use the PCI translator without the PCI core ...

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2014-04-02T20:42:59Z

Pull main powerpc updates from Ben Herrenschmidt: "This time around, the powerpc merges are going to be a little bit more complicated than usual. This is the main pull request with most of the work for this merge window. I will describe it a bit more further down. There is some additional cpuidle driver work, however I haven't included it in this tree as it depends on some work in tip/timer-core which Thomas accidentally forgot to put in a topic branch. Since I didn't want to carry all of that tip timer stuff in powerpc -next, I setup a separate branch on top of Thomas tree with just that cpuidle driver in it, and Stephen has been carrying that in next separately for a while now. I'll send a separate pull request for it. Additionally, two new pieces in this tree add users for a sysfs API that Tejun and Greg have been deprecating in drivers-core-next. Thankfully Greg reverted the patch that removes the old API so this merge can happen cleanly, but once merged, I will send a patch adjusting our new code to the new API so that Greg can send you the removal patch. Now as for the content of this branch, we have a lot of perf work for power8 new counters including support for our new "nest" counters (also called 24x7) under pHyp (not natively yet). We have new functionality when running under the OPAL firmware (non-virtualized or KVM host), such as access to the firmware error logs and service processor dumps, system parameters and sensors, along with a hwmon driver for the latter. There's also a bunch of bug fixes accross the board, some LE fixes, and a nice set of selftests for validating our various types of copy loops. On the Freescale side, we see mostly new chip/board revisions, some clock updates, better support for machine checks and debug exceptions, etc..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits) powerpc/book3s: Fix CFAR clobbering issue in machine check handler. powerpc/compat: 32-bit little endian machine name is ppcle, not ppc powerpc/le: Big endian arguments for ppc_rtas() powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n) powerpc/defconfigs: Enable THP in pseries defconfig powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split powerpc: Rate-limit users spamming kernel log buffer powerpc/perf: Fix handling of L3 events with bank == 1 powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes powerpc/perf: Add kconfig option for hypervisor provided counters powerpc/perf: Add support for the hv 24x7 interface powerpc/perf: Add support for the hv gpci (get performance counter info) interface powerpc/perf: Add macros for defining event fields & formats powerpc/perf: Add a shared interface to get gpci version and capabilities powerpc/perf: Add 24x7 interface headers powerpc/perf: Add hv_gpci interface header powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info) sysfs: create bin_attributes under the requested group powerpc/perf: Enable BHRB access for EBB events powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB ...

Merge tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2014-04-01T22:14:04Z

Pull PCI changes from Bjorn Helgaas: "Enumeration - Increment max correctly in pci_scan_bridge() (Andreas Noever) - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever) - Assign CardBus bus number only during the second pass (Andreas Noever) - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever) - Make sure bus number resources stay within their parents bounds (Andreas Noever) - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever) - Check for child busses which use more bus numbers than allocated (Andreas Noever) - Don't scan random busses in pci_scan_bridge() (Andreas Noever) - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas) - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas) - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas) - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas) - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas) NUMA - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas) - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas) - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas) - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas) - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas) - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas) - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas) - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas) Resource management - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas) - Add resource_contains() (Bjorn Helgaas) - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas) - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas) - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas) - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas) - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas) - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas) - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas) - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas) - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas) - s390: Use generic pci_enable_resources() (Bjorn Helgaas) - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas) - Set type in __request_region() (Bjorn Helgaas) - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas) - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas) - Log IDE resource quirk in dmesg (Bjorn Helgaas) - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas) PCI device hotplug - Make check_link_active() non-static (Rajat Jain) - Use link change notifications for hot-plug and removal (Rajat Jain) - Enable link state change notifications (Rajat Jain) - Don't disable the link permanently during removal (Rajat Jain) - Don't check adapter or latch status while disabling (Rajat Jain) - Disable link notification across slot reset (Rajat Jain) - Ensure very fast hotplug events are also processed (Rajat Jain) - Add hotplug_lock to serialize hotplug events (Rajat Jain) - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain) - Don't turn slot off when hot-added device already exists (Yijing Wang) MSI - Keep pci_enable_msi() documentation (Alexander Gordeev) - ahci: Fix broken single MSI fallback (Alexander Gordeev) - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev) - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman) - Fix leak of msi_attrs (Greg Kroah-Hartman) - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida) Virtualization - Device-specific ACS support (Alex Williamson) Freescale i.MX6 - Wait for retraining (Marek Vasut) Marvell MVEBU - Use Device ID and revision from underlying endpoint (Andrew Lunn) - Fix incorrect size for PCI aperture resources (Jason Gunthorpe) - Call request_resource() on the apertures (Jason Gunthorpe) - Fix potential issue in range parsing (Jean-Jacques Hiblot) Renesas R-Car - Check platform_get_irq() return code (Ben Dooks) - Add error interrupt handling (Ben Dooks) - Fix bridge logic configuration accesses (Ben Dooks) - Register each instance independently (Magnus Damm) - Break out window size handling (Magnus Damm) - Make the Kconfig dependencies more generic (Magnus Damm) Synopsys DesignWare - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar) Miscellaneous - Remove unused SR-IOV VF Migration support (Bjorn Helgaas) - Enable INTx if BIOS left them disabled (Bjorn Helgaas) - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter) - Clean up par-arch object file list (Liviu Dudau) - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom) - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang) - Fix pci_bus_b() build failure (Paul Gortmaker)" * tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits) Revert "[PATCH] Insert GART region into resource map" PCI: Log IDE resource quirk in dmesg PCI: Change pci_bus_alloc_resource() type_mask to unsigned long PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() resources: Set type in __request_region() PCI: Don't check resource_size() in pci_bus_alloc_resource() s390/PCI: Use generic pci_enable_resources() tile PCI RC: Use default pcibios_enable_device() sparc/PCI: Use default pcibios_enable_device() (Leon only) sh/PCI: Use default pcibios_enable_device() microblaze/PCI: Use default pcibios_enable_device() alpha/PCI: Use default pcibios_enable_device() PCI: Add "weak" generic pcibios_enable_device() implementation PCI: Don't enable decoding if BAR hasn't been assigned an address PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit PCI: Don't try to claim IORESOURCE_UNSET resources PCI: Check IORESOURCE_UNSET before updating BAR PCI: Don't clear IORESOURCE_UNSET when updating BAR PCI: Mark resources as IORESOURCE_UNSET if we can't assign them ... Conflicts: arch/x86/include/asm/topology.h drivers/ata/ahci.c

powerpc/perf: Add kconfig option for hypervisor provided counters

2014-03-23T22:48:32Z

The commit adds a Kconfig option which allows the hv_gpci and hv_24x7 PMUs, added in the preceeding commits, to be built. Signed-off-by: Cody P Schafer Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt