kernel.git/arch/powerpc/platforms/pseries/setup.c, branch linux-4.11.y

powerpc: Move isa bridge definitions to separate include

2017-01-31T02:54:17Z

We'll be adding non-PCI isa bridge support so let's not have all the definition in pci-bridge.h Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman

powerpc: Change places using CONFIG_KEXEC to use CONFIG_KEXEC_CORE instead.

2016-11-30T12:15:11Z

Commit 2965faa5e03d ("kexec: split kexec_load syscall from kexec core code") introduced CONFIG_KEXEC_CORE so that CONFIG_KEXEC means whether the kexec_load system call should be compiled-in and CONFIG_KEXEC_FILE means whether the kexec_file_load system call should be compiled-in. These options can be set independently from each other. Since until now powerpc only supported kexec_load, CONFIG_KEXEC and CONFIG_KEXEC_CORE were synonyms. That is not the case anymore, so we need to make a distinction. Almost all places where CONFIG_KEXEC was being used should be using CONFIG_KEXEC_CORE instead, since kexec_file_load also needs that code compiled in. Signed-off-by: Thiago Jung Bauermann Signed-off-by: Michael Ellerman

Merge tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2016-10-08T03:19:31Z

Pull powerpc updates from Michael Ellerman: "Highlights: - Major rework of Book3S 64-bit exception vectors (Nicholas Piggin) - Use gas sections for arranging exception vectors et. al. - Large set of TM cleanups and selftests (Cyril Bur) - Enable transactional memory (TM) lazily for userspace (Cyril Bur) - Support for XZ compression in the zImage wrapper (Oliver O'Halloran) - Add support for bpf constant blinding (Naveen N. Rao) - Beginnings of upstream support for PA Semi Nemo motherboards (Darren Stevens) Fixes: - Ensure .mem(init|exit).text are within _stext/_etext (Michael Ellerman) - xmon: Don't use ld on 32-bit (Michael Ellerman) - vdso64: Use double word compare on pointers (Anton Blanchard) - powerpc/nvram: Fix an incorrect partition merge (Pan Xinhui) - powerpc: Fix usage of _PAGE_RO in hugepage (Christophe Leroy) - powerpc/mm: Update FORCE_MAX_ZONEORDER range to allow hugetlb w/4K (Aneesh Kumar K.V) - Fix memory leak in queue_hotplug_event() error path (Andrew Donnellan) - Replay hypervisor maintenance interrupt first (Nicholas Piggin) Various performance optimisations (Anton Blanchard): - Align hot loops of memset() and backwards_memcpy() - During context switch, check before setting mm_cpumask - Remove static branch prediction in atomic{, 64}_add_unless - Only disable HAVE_EFFICIENT_UNALIGNED_ACCESS on POWER7 little endian - Set default CPU type to POWER8 for little endian builds Cleanups & features: - Sparse fixes/cleanups (Daniel Axtens) - Preserve CFAR value on SLB miss caused by access to bogus address (Paul Mackerras) - Radix MMU fixups for POWER9 (Aneesh Kumar K.V) - Support for setting used_(vsr|vr|spe) in sigreturn path (for CRIU) (Simon Guo) - Optimise syscall entry for virtual, relocatable case (Nicholas Piggin) - Optimise MSR handling in exception handling (Nicholas Piggin) - Support for kexec with Radix MMU (Benjamin Herrenschmidt) - powernv EEH fixes (Russell Currey) - Suprise PCI hotplug support for powernv (Gavin Shan) - Endian/sparse fixes for powernv PCI (Gavin Shan) - Defconfig updates (Anton Blanchard) - KVM: PPC: Book3S HV: Migrate pinned pages out of CMA (Balbir Singh) - cxl: Flush PSL cache before resetting the adapter (Frederic Barrat) - cxl: replace loop with for_each_child_of_node(), remove unneeded of_node_put() (Andrew Donnellan) - Fix HV facility unavailable to use correct handler (Nicholas Piggin) - Remove unnecessary syscall trampoline (Nicholas Piggin) - fadump: Fix build break when CONFIG_PROC_VMCORE=n (Michael Ellerman) - Quieten EEH message when no adapters are found (Anton Blanchard) - powernv: Add PHB register dump debugfs handle (Russell Currey) - Use kprobe blacklist for exception handlers & asm functions (Nicholas Piggin) - Document the syscall ABI (Nicholas Piggin) - MAINTAINERS: Update cxl maintainers (Michael Neuling) - powerpc: Remove all usages of NO_IRQ (Michael Ellerman) Minor cleanups: - Andrew Donnellan, Christophe Leroy, Colin Ian King, Cyril Bur, Frederic Barrat, Pan Xinhui, PrasannaKumar Muralidharan, Rui Teng, Simon Guo" * tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits) powerpc/bpf: Add support for bpf constant blinding powerpc/bpf: Implement support for tail calls powerpc/bpf: Introduce accessors for using the tmp local stack space powerpc/fadump: Fix build break when CONFIG_PROC_VMCORE=n powerpc: tm: Enable transactional memory (TM) lazily for userspace powerpc/tm: Add TM Unavailable Exception powerpc: Remove do_load_up_transact_{fpu,altivec} powerpc: tm: Rename transct_(*) to ck(\1)_state powerpc: tm: Always use fp_state and vr_state to store live registers selftests/powerpc: Add checks for transactional VSXs in signal contexts selftests/powerpc: Add checks for transactional VMXs in signal contexts selftests/powerpc: Add checks for transactional FPUs in signal contexts selftests/powerpc: Add checks for transactional GPRs in signal contexts selftests/powerpc: Check that signals always get delivered selftests/powerpc: Add TM tcheck helpers in C selftests/powerpc: Allow tests to extend their kill timeout selftests/powerpc: Introduce GPR asm helper header file selftests/powerpc: Move VMX stack frame macros to header file selftests/powerpc: Rework FPU stack placement macros and move to header file selftests/powerpc: Check for VSX preservation across userspace preemption ...

powerpc: Remove all usages of NO_IRQ

2016-09-20T10:57:12Z

NO_IRQ has been == 0 on powerpc for just over ten years (since commit 0ebfff1491ef ("[POWERPC] Add new interrupt mapping core and change platforms to use it")). It's also 0 on most other arches. Although it's fairly harmless, every now and then it causes confusion when a driver is built on powerpc and another arch which doesn't define NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least some of which are to work around that problem. So we'd like to remove it. This is fairly trivial in the arch code, we just convert: if (irq == NO_IRQ) to if (!irq) if (irq != NO_IRQ) to if (irq) irq = NO_IRQ; to irq = 0; return NO_IRQ; to return 0; And a few other odd cases as well. At least for now we keep the #define NO_IRQ, because there is driver code that uses NO_IRQ and the fixes to remove those will go via other trees. Note we also change some occurrences in PPC sound drivers, drivers/ps3, and drivers/macintosh. Signed-off-by: Michael Ellerman

powerpc/pseries: Fix little endian build with CONFIG_KEXEC=n

2016-09-06T04:54:08Z

On ppc64le, builds with CONFIG_KEXEC=n fail with: arch/powerpc/platforms/pseries/setup.c: In function ‘pseries_big_endian_exceptions’: arch/powerpc/platforms/pseries/setup.c:403:13: error: implicit declaration of function ‘kdump_in_progress’ if (rc && !kdump_in_progress()) This is because pseries/setup.c includes , but kdump_in_progress() is defined in . This is a problem because the former only includes the latter if CONFIG_KEXEC_CORE=y. Fix it by including directly, as is done in powernv/setup.c. Fixes: d3cbff1b5a90 ("powerpc: Put exception configuration in a common place") Signed-off-by: Thiago Jung Bauermann Signed-off-by: Michael Ellerman

powerpc: Get rid of ppc_md.init_early()

2016-07-21T09:07:26Z

It is now called right after platform probe, so the probe function can just do the job. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman

powerpc/64: Move 64-bit probe_machine() to later in the boot process

2016-07-21T08:59:22Z

We no long need the machine type that early, so we can move probe_machine() to after the device-tree has been expanded. This will allow further consolidation. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman

powerpc/64: Move MMU backend selection out of platform code

2016-07-21T08:56:38Z

We move it into early_mmu_init() based on firmware features. For PS3, we have to move the setting of these into early_init_devtree(). Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman

powerpc: Put exception configuration in a common place

2016-07-21T08:56:31Z

The various calls to establish exception endianness and AIL are now done from a single point using already established CPU and FW feature bits to decide what to do. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman

powerpc: Move FW feature probing out of pseries probe()

2016-07-21T08:56:13Z

We move the function itself to pseries/firmware.c and call it along with almost all other flat device-tree parsers from early_init_devtree() Signed-off-by: Benjamin Herrenschmidt [mpe: Move #ifdefs into the header by providing pseries_probe_fw_features()] Signed-off-by: Michael Ellerman