kernel.git/arch/powerpc/platforms/pseries/setup.c, branch linux-3.7.y

powerpc: Dynamically calculate the dabrx based on kernel/user/hypervisor

2012-09-09T23:59:13Z

Currently we mark the DABRX to interrupt on all matches (hypervisor/kernel/user and then filter in software. We can be a lot smarter now that we can set the DABRX dynamically. This sets the DABRX based on the flags passed by the user. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt

powerpc: Rework set_dabr so it can take a DABRX value as well

2012-09-09T23:59:10Z

Rework set_dabr to take a DABRX value as well. Both the pseries and PS3 hypervisors do some checks on the DABRX values that are passed in the hcall. This patch stops bogus values from being passed to hypervisor. Also, in the case where we are clearing the breakpoint, where DABR and DABRX are zero, we modify the DABRX value to make it valid so that the hcall won't fail. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt

powerpc/eeh: Move EEH initialization around

2012-09-09T23:35:27Z

Currently, we have 3 phases for EEH initialization on pSeries platform. All of them are done through builtin functions: platform initialization, EEH device creation, and EEH subsystem enablement. All of them are done no later than ppc_md.setup_arch. That means that the slab/slub isn't ready yet, so we have to allocate memory chunks on basis of PAGE_SIZE for those dynamically created EEH devices. That's pretty expensive. In order to utilize slab/slub for memory allocation, we have to move the EEH initialization functions around, but all of them should be called after slab is ready. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt

powerpc: Use the XDABR hcall

2012-09-07T01:44:42Z

We never use the XDABR hcall since we check for DABR hcall first. XDABR syscall is better since it allows us to also set the DABRX. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt

Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci

2012-03-23T21:02:12Z

Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...

powerpc/eeh: Introduce EEH device

2012-03-09T00:39:29Z

Original EEH implementation depends on struct pci_dn heavily. However, EEH shouldn't depend on that actually because EEH needn't share much information with other PCI components. That's to say, EEH should have worked independently. The patch introduces struct eeh_dev so that EEH core components needn't be working based on struct pci_dn in future. Also, struct pci_dn, struct eeh_dev instances are created in dynamic fasion and the binding with EEH device, OF node, PCI device is implemented as well. The EEH devices are created after PHBs are detected and initialized, but PCI emunation hasn't started yet. Apart from that, PHB might be created dynamically through DLPAR component and the EEH devices should be creatd as well. Another case might be OF node is created dynamically by DR (Dynamic Reconfiguration), which has been defined by PAPR. For those OF nodes created by DR, EEH devices should be also created accordingly. The binding between EEH device and OF node is done while the EEH device is initially created. The binding between EEH device and PCI device should be done after PCI emunation is done. Besides, PCI hotplug also needs the binding so that the EEH devices could be traced from the newly coming PCI buses or PCI devices. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt

powerpc/eeh: Platform dependent EEH operations

2012-03-09T00:08:54Z

EEH has been implemented on RTAS-compliant pSeries platform. That's to say, the EEH operations will be implemented through RTAS calls eventually. The situation limited feasible extension on EEH. In order to support EEH on multiple platforms like pseries and powernv simutaneously. We have to split the platform dependent EEH options up out of current implementation. The patch addresses supporting EEH on multiple platforms. The pseries platform dependent EEH operations will be abstracted by struct eeh_ops. EEH core components will be built based on the registered EEH operations. With the mechanism, what the individual platform needs to do is implement platform dependent EEH operations. For now, the pseries platform is covered under the mechanism. That means we have to think about other platforms to support EEH, like powernv. Besides, we only have framework for the mechanism and we have to implement it for pseries platform later. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt

powerpc/PCI: replace pci_probe_only with pci_flags

2012-02-24T03:18:58Z

We already use pci_flags, so this just sets pci_flags directly and removes the intermediate step of figuring out pci_probe_only, then using it to set pci_flags. The PCI core provides a pci_flags definition (currently __weak), so drop the powerpc definitions in favor of that. CC: Benjamin Herrenschmidt CC: linuxppc-dev@lists.ozlabs.org Signed-off-by: Bjorn Helgaas

powerpc/PCI: make pci_probe_only default to 0

2012-02-24T03:18:58Z

pci_probe_only is set on ppc64 to prevent resource re-allocation by the core. It's meant to be used in very specific circumstances such as when operating under a hypervisor that may prevent such re-allocation. Instead of default to 1, we make it default to 0 and explicitly set it in the few cases where we need it. This fixes FSL PCI which wants it clear among others. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Bjorn Helgaas

powerpc/mpic: Remove duplicate MPIC_WANTS_RESET flag

2012-02-22T23:50:00Z

There are two separate flags controlling whether or not the MPIC is reset during initialization, which is completely unnecessary, and only one of them can be specified in the device tree. Also, most platforms in-tree right now do actually want to reset the MPIC during initialization anyways, which means lots of duplicate code passing the MPIC_WANTS_RESET flag. Fix all of the callers which currently do not pass the MPIC_WANTS_RESET flag to pass the MPIC_NO_RESET flag, then remove the MPIC_WANTS_RESET flag and make the code reset the MPIC by default. Signed-off-by: Kyle Moffett Signed-off-by: Benjamin Herrenschmidt